Penelope & PP

Status
Not open for further replies.

JCB1

Super Member
ECF Veteran
Verified Member
Jan 12, 2012
769
781
New Jersey
After stalking the classies, I am now the proud owner of a Penelope! So excited! Wrapped my first wick and although I'm sure there is room for improvement, it's working! Should have tried the Penelope before I got into genesis style. . . still working on that. Nevertheless, currently have it set up on a Buzz Pro; wanted to use my Precise Plus, but it seems the 510 connections are not making contact. Any suggestions?

Appreciate any and all feedback!
Juanita
 

JCB1

Super Member
ECF Veteran
Verified Member
Jan 12, 2012
769
781
New Jersey
Sonds like the center pins in the 510 connection are not touching. An adjustment to the pin on Penelope (longer past the threads) should do the trick.

Many thanks for your response! That was my thinking; too bad it's full of juice now :D After I run the juice out, I'll trim the wicks a bit and see if I can't get it screwed down further so the pin is sticking out a bit more.

Thanks again!
 

justinred

Super Member
ECF Veteran
Verified Member
Oct 7, 2012
991
555
56
PH
Many thanks for your response! That was my thinking; too bad it's full of juice now :D After I run the juice out, I'll trim the wicks a bit and see if I can't get it screwed down further so the pin is sticking out a bit more.

Thanks again!
You can adjust without removing juice. Invert penelope and unscrew bottom cap while holding tank and mouthpiece. You should be able to remove base with the rebuildable assy without spilling a drop of juice. Adjust centerpost height with the base mounted on the mod and test fire before screwing back in to the penelope body and mouthpiece.
 
Status
Not open for further replies.

Users who are viewing this thread