Picture of Your Setup Part 3!

[icepickmaker84]

I do not know if you can still get the Copper TRIGGER 168. I had it a year and a haif and just love it. Thanks and sorry I did not get back sooner.

Does the driptip on your challenge cap get hot? I have the steel Butcher cap and never even tried the steel dt mine came with.

 

[icepickmaker84]

Titan setup and the Dalton.

Sent from my iPhone using Tapatalk

 

[Electrodave]

I finally got a guitar finished and listed for sale. Cinnamon is an awesome playing and sounding strat style guitar. She's also the first of my "All American" series. All of the wood is US sourced, all of the parts were made in the US, with the sole exception of the bridge saddles, which were made in Canada. Which is still part of North America.

Check her out here Cinnamon--All American Beauty! From Estes Electrostring

To celebrate, I broke out three of my favorite SLS M6 clones. On the left is an awesome clone by hcigar, wearing a Melo 4. It's a great mod in its own right.

In the middle is one by Tesla. It's a 26650 size, which AmeriVape never produced. I don't think they ever made mods in cast aluminum, either. Is it still a clone if the product never existed in the first place? That's an awesome Sigelei Moonshot tank on top.

On the right is one by Tobeco. Steel, and well made, but still pales next to the hcigar. With a Kabuki, so I can tootle in style!

 

[Daniel Forsyth]

View attachment 840839
I finally got a guitar finished and listed for sale. Cinnamon is an awesome playing and sounding strat style guitar. She's also the first of my "All American" series. All of the wood is US sourced, all of the parts were made in the US, with the sole exception of the bridge saddles, which were made in Canada. Which is still part of North America.

Check her out here Cinnamon--All American Beauty! From Estes Electrostring

To celebrate, I broke out three of my favorite SLS M6 clones. On the left is an awesome clone by HCigar, wearing a Melo 4. It's a great mod in its own right.

In the middle is one by Tesla. It's a 26650 size, which AmeriVape never produced. I don't think they ever made mods in cast aluminum, either. Is it still a clone if the product never existed in the first place? That's an awesome Sigelei Moonshot tank on top.

On the right is one by Tobeco. Steel, and well made, but still pales next to the HCigar. With a Kabuki, so I can tootle in style!

I had a good look @Electrodave
She Looks Magnificent
Very Nice Job

 

[icepickmaker84]

The all clone squonk setup.


Sent from my iPhone using Tapatalk

 

[TrollDragon]

Hopefully the Reload RDA that comes with it is decent.

Leave the Reload RDA in the box, it's not worth the time. Mesh style deck that has the air holes way too far away from the coil. It's not touted as a mesh RDA but looks like something they designed and it had failed, but since they had a ton of them laying around, just put TVLs name on it and include it in the kit.

YMMV with it, I put a dozen different builds in that RDA and it was mediocre at best, no time to try and make junk work when there is better readily available IMHO.

 

[Spydro]

First of my 3 new Reos arrived today. This is a Supervein LP Grand, the Mini due tomorrow and P67 last. I'm now a Reonaut.
View attachment 840489

Congrats on the SuperVein.

I "wore" a couple of Reonaut badges for a few years... but don't consider myself one anymore.

Here's one that you can photoshop yourself for the land of Oz...

 

[f1vefour]

Do any of you pocket your squonk? If so what do you do about lint? Use a tiny bore drip tip I'm guessing?

I've been vaping for years but just got into the squonk game.

 

[Spydro]

Just another 34 to catch up to Spydro...

While I still consider the Reo's the best mech squonkers ever offered, I only use 5 of them these days (the P67's). It was fun hunting for and getting all the others, but was not a very good investment in the end since most of them and their endless authentic atty's didn't see much use, some of them didn't see any use at all. Unless you want to collect them, don't get as deep as I did by over buying them like I did.

In honor of your Reo Mini that's coming tomorrow... here's some Reo Mini madness for you. Missing in this picture is two 18490 Woodvils similar to the one on the left end. Other than the customized by Rob O'Neil RM2 atty on the left, there are a lot of expensive authentic attys on the rest that didn't work very well for my DL vaping style. A Chalice II and several III's, one of 8 Nuppin's, four O-16's, and a Hornet.

Enjoy your Reos... with little care they should last you a lifetime.

 

[icepickmaker84]

Do any of you pocket your squonk? If so what do you do about lint? Use a tiny bore drip tip I'm guessing?

I've been vaping for years but just got into the squonk game.

I put my squonker in my back pocket and have yet to get lint in the drip tip.

 

[Tralfaz]

Axial RDA on my custom Vindicator and some excellent peanut butter and strawberry jam.

 

[icepickmaker84]

Purge Redeemer with Dead Rabbit. My Purge was part of the “Secret Road-worn Series” as it arrived looking like it was thrown down a flight of stairs ha ha.

Sent from my iPhone using Tapatalk

 

[TrollDragon]

Do any of you pocket your squonk? If so what do you do about lint? Use a tiny bore drip tip I'm guessing?

I've been vaping for years but just got into the squonk game.

I pocket all my rigs. You remember that little tip of the tongue spit we used to do when you got a piece of tobacco in your mouth, do the same with the lint.

 

[Pigs]

Congrats on the SuperVein.

I "wore" a couple of Reonaut badges for a few years... but don't consider myself one anymore.
View attachment 840935 View attachment 840937

Here's one that you can photoshop yourself for the land of Oz...
View attachment 840939

Thanks Spydro LOL. Now I'm waiting on the P67 and a few more doors, buttons and spares. By my count in the last 2 weeks of business Reos went from order #3305 to order #4956 so I'm not surprised they are a bit slow in getting the package to USPS. When I get that I'll post a pic of Grand, Mini and P67.
How often should I clean the contacts?

 

[Pigs]

While I still consider the Reo's the best mech squonkers ever offered, I only use 5 of them these days (the P67's). It was fun hunting for and getting all the others, but was not a very good investment in the end since most of them and their endless authentic atty's didn't see much use, some of them didn't see any use at all. Unless you want to collect them, don't get as deep as I did by over buying them like I did.

In honor of your Reo Mini that's coming tomorrow... here's some Reo Mini madness for you. Missing in this picture is two 18490 Woodvils similar to the one on the left end. Other than the customized by Rob O'Neil RM2 atty on the left, there are a lot of expensive authentic attys on the rest that didn't work very well for my DL vaping style. A Chalice II and several III's, one of 8 Nuppin's, four O-16's, and a Hornet.

View attachment 840941
View attachment 840943 View attachment 840945 View attachment 840947 View attachment 840949

Enjoy your Reos... with little care they should last you a lifetime.

Thanks. What great photos. No I'm happy with the one mini (I posted a photo on pg 666) - I'm a DL vaper too so I bought it because it was $40 and knew I'd never get another one brand new.. The Grand LP hasn't left my hand since I got It. I'm running a Tobhino atty with a 0.3 Ohm clapton build today and loving it but from what you've said it seems like the P67 is the most practical for vaping with modern attys.

 

[Pigs]

Do any of you pocket your squonk? If so what do you do about lint? Use a tiny bore drip tip I'm guessing?

I've been vaping for years but just got into the squonk game.

I put mine in a soft case - the type that comes with reading glasses. Draw string closes it off and it doesn't add bulk to the mod in your pocket

 

[Fidola13]

First of my 3 new Reos arrived today. This is a Supervein LP Grand, the Mini due tomorrow and P67 last. I'm now a Reonaut.
View attachment 840489

I’m embarrassed because I’ve never heard of them previously!!

 

[Fidola13]

Purge Redeemer with Dead Rabbit. My Purge was part of the “Secret Road-worn Series” as it arrived looking like it was thrown down a flight of stairs ha ha.

View attachment 841033


Sent from my iPhone using Tapatalk

Was it new?

 

[icepickmaker84]

Was it new?

Yep. Got it from EightVape for Father’s Day. I was all excited because I got it a couple days early (my Wife got her Mother’s Day gift early), then I took a closer look. 2” scratch down the fire button side, all the magnets were loose on the mod, 510 wasn’t actually tightened down more than finger tight, and the door rattles unless I use a 21700...not a big deal but I really like the p26a.

 

[jandrew]

A little Luna love tonight