Reply to thread

Message

<blockquote data-quote="charlie1465" data-source="post: 21917649" data-attributes="member: 240875">I decided not to polish up my Luna because someone has told me about some Luna&#039;s that have been contoured and i&#039;m waiting to see pics as I may do it too. I did think of it on my first one but there isn&#039;t that much wood to play with and I didn&#039;t want to make it too thin...So finally my package from the 22nd June got here with 2 Integra&#039;s and an Ataman V4 both restricted direct lung so have built the Integra. It gave me a bit of trouble as every time I put the deck back in it caused a short and after inspection I was pretty sure the coil wasn&#039;t touching anywhere. Eventually I found that there was a tiny bit of lead poking just the other side of the peak insulator on one of the contacts....snipped it off and all was well.Here it is on the aegis solo at 30 watts with a fused clapton SS at 0.42 ohm&#039;s.....its wicking like a champ so far and the machining is very good....nice looking RDA and a nice form factor for 4.5 ml. It&#039;s not much bigger than the Taifun Lite <img src="data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7" class="smilie smilie--sprite smilie--sprite20" alt=":D" title="Big Grin&nbsp; &nbsp; :D" loading="lazy" data-shortname=":D" />[ATTACH=full]826319[/ATTACH]</blockquote>

[QUOTE="charlie1465, post: 21917649, member: 240875"] I decided not to polish up my Luna because someone has told me about some Luna's that have been contoured and i'm waiting to see pics as I may do it too. I did think of it on my first one but there isn't that much wood to play with and I didn't want to make it too thin... So finally my package from the 22nd June got here with 2 Integra's and an Ataman V4 both restricted direct lung so have built the Integra. It gave me a bit of trouble as every time I put the deck back in it caused a short and after inspection I was pretty sure the coil wasn't touching anywhere. Eventually I found that there was a tiny bit of lead poking just the other side of the peak insulator on one of the contacts....snipped it off and all was well. Here it is on the aegis solo at 30 watts with a fused clapton SS at 0.42 ohm's.....its wicking like a champ so far and the machining is very good....nice looking RDA and a nice form factor for 4.5 ml. It's not much bigger than the Taifun Lite :D [ATTACH=full]826319[/ATTACH] [/QUOTE]

Verification

Search

Search

Reply to thread