Reply to thread

Message

<blockquote data-quote="snork" data-source="post: 23546431" data-attributes="member: 63139">[ATTACH]980362[/ATTACH][ATTACH]980363[/ATTACH]The T1 had optional fittings for the various atomizers of the time. This is the cap for the 801 atomizer. The 801&#039;s airflow comes from underneath, and David at Super T devised the first stab at making an adjustable airflow by drilling a hole into the side of the cap which feeds air to the atomizer. Then you can incrementally cover up that hole by means of the set screw drilled down from the top. It&#039;s funky but works.Pictured is my unit in the 801 configuration. The gold standard of 801s at the time was Ikenvape, and you see an Ikenvape 3.5ohm HR here. Gold standard or not, 801s were horrible finicky beasts. There&#039;s a fine line between leaky flooded mess and dry burnt blech. This one&#039;s doing pretty fair though, not to mention the 801 was the precursor and inspiration for the rebuildable atomizers we have today.</blockquote>

[QUOTE="snork, post: 23546431, member: 63139"] [ATTACH alt="PXL_20220908_133310426.jpg"]980362[/ATTACH][ATTACH alt="PXL_20220908_135113368.jpg"]980363[/ATTACH] The T1 had optional fittings for the various atomizers of the time. This is the cap for the 801 atomizer. The 801's airflow comes from underneath, and David at Super T devised the first stab at making an adjustable airflow by drilling a hole into the side of the cap which feeds air to the atomizer. Then you can incrementally cover up that hole by means of the set screw drilled down from the top. It's funky but works. Pictured is my unit in the 801 configuration. The gold standard of 801s at the time was Ikenvape, and you see an Ikenvape 3.5ohm HR here. Gold standard or not, 801s were horrible finicky beasts. There's a fine line between leaky flooded mess and dry burnt blech. This one's doing pretty fair though, not to mention the 801 was the precursor and inspiration for the rebuildable atomizers we have today. [/QUOTE]

Verification

Search

Search

Reply to thread