Pictures of your setup

Status
Not open for further replies.

JamesEh408

Senior Member
ECF Veteran
Aug 23, 2013
181
90
46
San Jose Ca
Quit smoking cigs n get a new hobby at the same time

:vapor:

ysegemeq.jpg


"Be youself, no one else can"

- Dr. Suess -
 

hacklerjason

Full Member
Sep 30, 2012
48
24
41
Hawaii
LavaTube 2.0, ProVari 2.5 Blue LED (Converted)(Polished to mirror), ProVari 2.0 Blue LED (Conversion in Progress)(Polish in progress), ProVari Mini 2.5 Red LED (Conversion coming soon)(Haven't polished yet but when I change to blue LED I will)
BT-V1 tank Bottom Feed Top Coil Clearo Type
AGA-T+ tank Bottom Feed Top Coil Genesis Type
Kanger ProTank 2 tank Top Feed Bottom Coil Clearo Type
JoyTech Drip Atomizer
4a5evade.jpg

Sent from my T999
 
Last edited:

icucme2

Ultra Member
ECF Veteran
Verified Member
Jul 15, 2012
1,823
2,386
42
Costa Mesa, ca
Up till now, I've run nothing but Ithakas, but finally took the plunge (Ummm.. That means my wife allowed me) to finally order a Kayfun 3.1. This is exactly what I plan on doing! Really difficult to put micro coils on Ithakas.

Sent from my Note II using Tapatalk.


congrats on getting a KayFun.. try different setups.. im happy with this now.. i used a 5/64 drill bit.. 10 wraps of 28 gauge gets u at about 1.64ohms.. but im going to tak two loops off and hoping to be at 1.2ohms.. good luck with ur build..
 

MoDmAnDaN

Ultra Member
ECF Veteran
Verified Member
May 31, 2013
1,157
1,103
61
Spanaway, Wa.
congrats on getting a KayFun.. try different setups.. im happy with this now.. i used a 5/64 drill bit.. 10 wraps of 28 gauge gets u at about 1.64ohms.. but im going to tak two loops off and hoping to be at 1.2ohms.. good luck with ur build..

That was my thinking. I run my Ithakas at 1.2 or 3, so 1.6 might be a bit high for me. I'm also planning on running dual micro coils with 30 guage. that might get me where I want to be too.
 

ilanstylz

Senior Member
ECF Veteran
Verified Member
Jul 6, 2013
196
135
SoCal
Status
Not open for further replies.

Users who are viewing this thread