- Status
Ah oops and duh. Thanks BJ Now your talking I prefer no types of wicking rope. It's hard to tell by your piture and it white in color do you still burn it?
Last edited:
I don't own any rope for wicks, glass, silica, or ceramic. I do have a cowboy lasso I am pretty good with.
Great looking pipe there Eye
Need more draw air, which option, bigger hole or second hole on opposite side..I think second hole, easier to cover a new hole than to reduce the old hole if you make it to large...
For the diehard dripper no storage. I had some pieces of rolled ss wick that I had cut off wicks for my ce2 and I put three pieces parallel about 3/8"long, rolled 5 wraps of 32awg and it is great for straight dripping, The 3/16" diameter coil hold enough juice for 10 puffs and the widely separated coil does not gunk up as fast. It seems I have reached my limit of pictures it won't let me post more.
Hey BJ, photos are great, may I suggest you join Photobucket. I had to, its free and easier actually than using ECF
Nice thread BJ glad I found it.
Here is a photo of my moded Ego cone using a Ego mega DT for a shorter tube. The treads on the Ego cone are the same as the Bulli Cone I have also taken a Bulli T cone (Type A) and made a dripping tube out of it. Photos latter on today.
I am going to work on a Black one for my Black PB, and will work on polishing the one I made the other day
View attachment 59756View attachment 59754View attachment 59757View attachment 59755
Here is a photo of my moded Ego cone using a Ego mega DT for a shorter tube. The treads on the Ego cone are the same as the Bulli Cone I have also taken a Bulli T cone (Type A) and made a dripping tube out of it. Photos latter on today.
I am going to work on a Black one for my Black PB, and will work on polishing the one I made the other day
View attachment 59756View attachment 59754View attachment 59757View attachment 59755
This was my project for the day.
Top fed REO woodvil using a A2 Bulli with the Type A cone I did not use the piercing section of the tank set up, but drilled a hole in the tub for air flow and drilled a hole in a Type A Ego DT to top feed my Bulli A2.
The Bulli is set up at 1.6 and I am running a IMR 18650.
Top fed REO woodvil using a A2 Bulli with the Type A cone I did not use the piercing section of the tank set up, but drilled a hole in the tub for air flow and drilled a hole in a Type A Ego DT to top feed my Bulli A2.
The Bulli is set up at 1.6 and I am running a IMR 18650.
Last edited:
This was my project for the day.
Top fed REO woodvil using a A2 Bulli with the Type A cone I did not use the piercing section of the tank set up, but drilled a hole in the tub for air flow and drilled a hole in a Type A Ego DT to top feed my Bulli A2.
The Bulli is set up at 1.6 and I am running a IMR 18650.
Fantastic job, MX !
This mornings project before I got my but to work
Top fed Phidias using a A2 Bulli with the Type A cone I did not use the piercing section of the tank set up, but drilled a hole in the tub for air flow and drilled a hole in a Type A Ego DT to top feed my Bulli A2.
The Bulli is set up at 1.6 and I am running a IMR 18650.
Top fed Phidias using a A2 Bulli with the Type A cone I did not use the piercing section of the tank set up, but drilled a hole in the tub for air flow and drilled a hole in a Type A Ego DT to top feed my Bulli A2.
The Bulli is set up at 1.6 and I am running a IMR 18650.
- Status
Similar threads
- Locked
