Please help with sigelei 150w

[FuzzyTheFox]

I recently got my sigelei 150w and after a day of use whenever i press the firing button the voltage on the display changes.. same with the ohms. Everytime I press the button and its at 65 watts the voltage will jump everywhere in between 5.0v - 7.2v actually set my rda cotton on fire for a second until i was able to blow it out! at about 42 watts it started to jump in between 4.5v and 5.5vnot sure if its and atomizer problem or even a problem with the chip. please help if you know anything

 

[Thayamax]

Anytime the resistance changes in your atomizer the voltage will change along with it to maintain your watt setting. The cause of a bouncing resistance usually lies within your atomizer, most commonly a loose connection. Make sure all the screws holding your wires are tight as sometimes they loosen up a bit, causing the problem you are describing. I have a sigelei 150 and have not experienced this as a problem with the mod.

 

[roxynoodle]

I agree its probably the atty. The quickest way to find out would be to try another atty on your Sig and see what happens. If it is the Sig, its probably the 510 rather than the chip. Wouldn't hurt to clean that 510 with alcohol on a q tip.

 

[BackDoc]

I concur , try another atty