popping attys

[ddy611]

are you guys having this problem with your big chucks. i just got my 901 big chuck this morning. put a brand new fully charge rcr123a 750mah batteries on it. put two drips on a brand new 901 atomizer, filled up the cart. heard it sizzling and pop. ok put another brand new 901, same thing sizzled and popped grabbed my 510 adapter, dripped twice on a brand new joye510, filled up the cart, sizzled and popped.. WTF but my 901 atty i got from vapor country (clone atty with a washer) didnt pop. its working on my chuck at 6v my chuck destroyed 2 x 901s from healthcabin and 1 x 510 from cignot but it cant destroyed a cloned 901 from vapor country

 

[ddy611]

am i the only one experiencing this problem?? is there something wrong with my chuck??

 

[hecknaw]

I hear your plea,i guess that everyone is at work.they'll be around before long to give a helping hand!! i don't use the 2 cr123's at 6V. The power being supplied to 6V's must be alot, and enough to pop an atty! i know other folks here use the 2 battery cr123 option and they'll help you get through this setback!!

 

[ddy611]

I hear your plea,i guess that everyone is at work.they'll be around before long to give a helping hand!! i don't use the 2 cr123's at 6V. The power being supplied to 6V's must be alot, and enough to pop an atty! i know other folks here use the 2 battery cr123 option and they'll help you get through this setback!!

i hear you. im at work too. waiting for 5 so i can go home.

 

[doots]

I have popped attys on my Chuck at 6v but that does seem a bit fast. I did have the same thing happen with a 901 but not the 510s. I never tried 901s again at 6v after that experience. I now use mostly cartomizer and they hold up fine to 6v although they have a very warm vape. I do 5v mostly as I like it much better.

Is your chuck a 901 connector? are you using an adapter for the 901s? I see you are using one for the 510s. The reason I ask sometimes the center post on these adapters short out like the 510>801s which will pop attys fast.

I havent heard of a 801>510 center post insulator problem or a 901>510.

Anyways. you need to get some HV attys. PM Nerf for Info or see East Mall. They now carry them. I think Nhaler will have them soon too..

Also be sure your connector on the Chuck feels tight and isnt shorting.

Other than that some attys just pop quickly but that does seem odd to just pop right off the bat..

 

[ddy611]

I have popped attys on my Chuck at 6v but that does seem a bit fast. I did have the same thing happen with a 901 but not the 510s. I never tried 901s again at 6v after that experience. I now use mostly cartomizer and they hold up fine to 6v although they have a very warm vape. I do 5v mostly as I like it much better.

Is your chuck a 901 connector? are you using an adapter for the 901s? I see you are using one for the 510s. The reason I ask sometimes the center post on these adapters short out like the 510>801s which will pop attys fast.

I havent heard of a 801>510 center post insulator problem or a 901>510.

Anyways. you need to get some HV attys. PM Nerf for Info or see East Mall. They now carry them. I think Nhaler will have them soon too..

Also be sure your connector on the Chuck feels tight and isnt shorting.

Other than that some attys just pop quickly but that does seem odd to just pop right off the bat..

901 big chuck and i have a 901 to 510 adapter i got at madvapes. now i only got 1 x 510 and 1 x 901(new style w/ washer) left. my chuck killed my atty back-ups. so far 2 x 901 and 2 x 510

 

[MHR7331]

How long are the hits you're taking? They shouldn't be dying that fast.