Porvorn!

[Ronsin909]

I started a new thread but here's a pic since this is the Porvorn thread! Oh, also, I showed pics of Serenity & Parish side by side... and splat wanted to see the stitching on the Serenity (below).

http://www.e-cigarette-forum.com/forum/provari/498091-parish-sleeves-provari-pics-measurments.html

Back Stitching - Left: Parish, Right: Serenity

What kind and where can I get that ring?

 

[baghandler]

I need to get a tip for the privadero, how does that work with the screw? Which one do I get?

Actually, any drip tip will work. The angle of the needle nose tip is a little wonky when you go to fill the tank through the fill hole with some drip tips - so you'd just remove the drip tip before filling the tank through the fill hole.

Frankly, the biggest concern that I have with the Privadero (now that the obscene drip tip has been replaced), is that one of these days I am certain that I will misplace the tiny little screw that goes into the fill hole on the top cap. I need to be sure that the Privadero isn't the tank that I am using if it is going to be one of those nights. *cough* Friday night wine night *cough*

 

[Stormy1960]

What kind and where can I get that ring?

http://www.trevvapor.de/by-TrevVapo...lum::9.html?MODsid=m5fa011nsv0v567kgtqtq8egs1

 

[baghandler]

What kind and where can I get that ring?

If you are talking about the brass ring that is sitting between the tank and the ProVari, that is from TrevVapor. You can get it either as part of the Prorogatio extension set or with the Cingulum Compleo. It is gorgeous, isn't it?

 

[Stormy1960]

Actually, any drip tip will work. The angle of the needle nose tip is a little wonky when you go to fill the tank through the fill hole with some drip tips - so you'd just remove the drip tip before filling the tank through the fill hole.

Frankly, the biggest concern that I have with the Privadero (now that the obscene drip tip has been replaced), is that one of these days I am certain that I will misplace the tiny little screw that goes into the fill hole on the top cap. I need to be sure that the Privadero isn't the tank that I am using if it is going to be one of those nights. *cough* Friday night wine night *cough*

Lol..I ordered an extra one, but none of my drip tips will fit with the screw...and I have a lot of drip tips8-o

 

[baghandler]

Lol..I ordered an extra one, but none of my drip tips will fit with the screw...and I have a lot of drip tips8-o

You know what, I apologize. I have been using the Sophia exclusively now since I first got her, and she sits a few mm higher than the top of the top cap of the tank (the Sophia is more the length of an XL carto). With a standard sized cartomizer (one that would sit flush with the top cap of the Privadero), I can see why a drip tip with a wider base than the carto would be problematic. Sorry.

 

[darkgear]

I need to get a tip for the privadero, how does that work with the screw? Which one do I get?

Actually, any drip tip will work. The angle of the needle nose tip is a little wonky when you go to fill the tank through the fill hole with some drip tips - so you'd just remove the drip tip before filling the tank through the fill hole.

Frankly, the biggest concern that I have with the Privadero (now that the obscene drip tip has been replaced), is that one of these days I am certain that I will misplace the tiny little screw that goes into the fill hole on the top cap. I need to be sure that the Privadero isn't the tank that I am using if it is going to be one of those nights. *cough* Friday night wine night *cough*

Any drip tip that is straight at the bottom will work. The KirF Zantos or "The Ball" are good examples. The IBTanked Rook drip tip and most "vase" shaped tips wont work.

baghandler may be saying any drip tip because the sophia extends above the top of the tank by 10mm. if you use a regular carto your DT will be flush with the top.

Most drip tips on these KirF tanks end up like he one on the right

 

[Stormy1960]

Found one!
SnP and Privadero tank.



Sent from my iPad using Tapatalk HD

 

[Stormy1960]

Any drip tip that is straight at the bottom will work. The KirF Zantos or "The Ball" are good examples. The IBTanked Rook drip tip and most "vase" shaped tips wont work.

baghandler may be saying any drip tip because the sophia extends above the top of the tank by 10mm. if you use a regular carto your DT will be flush with the top.

Most drip tips on these KirF tanks end up like he one on the right

Wow! Out of all my tips only that one kinda fits...that is a little sad, we need to look for a custom one....

 

[darkgear]

Some SnP lovin'...

22mm and 23mm

23mm with SnP Pro Ring

 

[chadsmo]

I like the 23mm Provari tank cap , gives a little cleaner look IMO.

 

[mackman]

Lol..I ordered an extra one, but none of my drip tips will fit with the screw...and I have a lot of drip tips8-o

I got my drip tips for the Kir Fanis tanks at Braid Drip Tips - Drip Tip Designz lots of straight core designs.

 

[The Ocelot]

It certainly belongs in the "Provorn" subforum. Heh.

I don't get it.

 

[darkgear]

I like the 23mm Provari tank cap , gives a little cleaner look IMO.

Agreed. and probably looks best on a satin or black ProVari.

I wish it had air holes though. Do you get no airflow if you make it completely flush?

 

[jetcity]

If you cut the fill screw on the KF tanks you have a lot more tip choices.

 

[chadsmo]

Agreed. and probably looks best on a satin or black ProVari.

I wish it had air holes though. Do you get no airflow if you make it completely flush?

Maybe… lol. Man I love this tank so much.


As for airflow I just position my Sofia far enough out of the tank to give it just a .5mm gap to let the air in.

Edit.

I think that's an acceptable gap and there is adequate airflow.

 

[Telly R]

Nicely done Chadsmo, Stormy and Darkgear... like the set ups.

I am almost there with the GP set up; waiting on the Sophias to arrive!

 

[The Ocelot]

I think I'm lucky that I don't understand how a Sophia works - please don't tell me.

 

[chadsmo]

I think I'm lucky that I don't understand how a Sophia works - please don't tell me.

It's magic. But if you really don't want to know you should never stop by the By Leo thread on the euro supplier sub forum.

http://www.e-cigarette-forum.com/forum/euro-suppliers/426015-leo-attys-mods-drip-tips-tanks.html

 

[AngiBe]

I thought I read somewhere that the Sophia doesn't fit the SnP tank so the red oring that comes w/the Sophia is needed, is that correct? I love the look of the SnP tank and may need to get that for the Sophia.