-
Need help from former MFS (MyFreedomSmokes) customers
Has any found a supplier or company that has tobacco e-juice like or very similar to MFS Turbosmog, Tall Paul, or Red Luck?
View thread
- Status
DID Clone with 2mm silica doubled and tail end into tank. 32 ga kanthal @ 1.8 ohms. wrap is a little tight slowing wicking but is working.
might try removing the fill screw before rebuilding to see how that helps with wicking.
reason for this build was AGA-T+ with mesh heats up juice and taste suffers.
Last edited:
View attachment 209677
DID Clone with 2mm silica doubled and tail end into tank. 32 ga kanthal @ 1.8 ohms. wrap is a little tight slowing wicking but is working.
might try removing the fill screw before rebuilding to see how that helps with wicking.
reason for this build was AGA-T+ with mesh heats up juice and taste suffers.
Didn't you just get your AGA? Quick progression! (good thinking)
Yes a quick progression but I noticed the taste of the mesh and how it makes the juice taste change from the heat. So on the DID clone I made a wick as you had shown before with the doubled over tail design. I have removed the fill screw and does wick better. But I think next will try on another DID clone with a 3mm silica wick and see how that goes. I have some cotton wick on order so that will be later.
Trying to see what I like then will build the RSST RBA I just got in
I am a quick study and have patience to work with this stuff. This was a freehand coil with no stiffening pin lol. (was a real patience test lol)
I just got some Bakero Wire and did a 2/3 wrap on my Macaveli 350. Resistance is 0.8 ohm.
Last edited:
That's really cool those micros. Need to see about how to make one of those myself.
Nice work. This thread and pdibs aga thread has really inspired me. Now I'm rocking my rsst and my ac9.
Pix tomorrow
Pix tomorrow
Thanks!
Looks like you found the "how to make" thread. Just let me know if you have any questions.
Nice coil on the DID BTW!
Nice work, dude. Energizer Bunny of builds. All looking real good, man. (don't forget to eat and sleep, now and again)
Last edited:
Nice work, dude. Energizer Bunny of builds. All looking real good, man. (don't forget to eat and sleep, now and again)
Oh, hey, Shawn-sr, don't forget to try these . . . .
Homework . . . . . .due tuesday
Last edited:
What in the name of the Flying Spaghetti Monster is that in the fourth pic? an AGA?It looks like a Vivi Nova and an AGA had wild jungle luvinz and made a hybrid! 
And what are you wicking that with Pdib? I guess that fixes any wicking issues, huh?
you get a "like" for the FSM reference. lol
In honor of His noodly appendage...
2.0 ohms of 30 AWG, cotton wick (now soaking in my favorite mentholated brain melter...mmmm brains...) Gave it a test fire after dripping to the wicks, nice clean taste.... (this is kinda my "tester" for a XC-116 build that I'm hopefully going to try...)
((Did I pass Pdib?))
- Status
Similar threads
