Precise ELA Telescoping MOD by Super-T Manufacturing PT 2

[forcedfuel50]

Ok, reassuring responses Thanks, I won't go cray cray ordering, haha.

Hopefully I can nab a few next batch. Won't be satisfied until I have spares for my spares, juuust in case. Springs do like to go BOING!

Thanks for the details AvidFan. Looks like I would like the HD spring, but I will wait and see. I know what you mean about some atties having sharper contacts than others, think I may have a few lying around. I tighten just enough to not wobble. Still, I will be mindful of any sharper atties. I wasn't aware of the switch to Palladium on all the contacts, but yes still plenty wear resistant, good stuff.

You'll find the new compression bands can handle more torque due to their larger size, so they should be more durable and not need replacing as frequently or at all. We don't have any v2 bands for sale at this time. Contacts, just don't sand them and watch for rough atomizers and they'll give you great lifespan.

 

[forcedfuel50]

This is a good time to mention that the V2's we have been shipping with the HD spring. If you find that too firm and like a softer feel, go with the regular tension spring.

 

[vNistelrooy]

Yes, that shipped out last week.

Wohoooo!!!!!! Thank you for the info!! Flashbacks of correspondence with Amanda back in Sept 2013, me asking about ELA availability, only to be turned down..

Woohoooooo!!!!!!!!!!!


Sent from my iPhone using Tapatalk

 

[Wiz62]

ELA ship status update:

Thru order 19483 by the end of the week

will these be shipped out early this week?

 

[anavidfan]

This is a good time to mention that the V2's we have been shipping with the HD spring. If you find that too firm and like a softer feel, go with the regular tension spring.

When will the reg springs be available?

 

[forcedfuel50]

When will the reg springs be available?

I can put some up if you want them. I have some. All V2's are now back to shipping with the regular spring(including yours). I can't make up my mind...lol.

 

[forcedfuel50]

will these be shipped out early this week?

Working on them now

 

[EbenezerScrews]

I can put some up if you want them. I have some. All V2's are now back to shipping with the regular spring(including yours). I can't make up my mind...lol.

Haha, oh nerts, when will HD springs be available then?

My Ela order is 19699 so I've got a while, tweedlie dee teedlie doo...

 

[kscoggins]

Fortunately I had a regular spring sitting around -- I do like it better than the HD on the ELA.
The button/bottom cap make a HUGE difference! I think the new compression band is an improvement, although I never had problems with the old one.
Now I just need to decide what finish I ultimately want. I definitely can't keep the satin Strata on the polished ELA... Just want to decide before I refinish everything.

 

[mbh87]

Got my switch today, but no ELA

 

[vNistelrooy]

David, email from Amanda says that #19447 is not out yet. Come to think of it, i did not receive any tracking info..hmmm


Sent from my iPhone using Tapatalk

 

[HauntedMyst]

vNistelrooy, when you ordered, were you signed in? I've ordered and stuff just shows up no notice but its been because I forgot to sign into my account.

 

[vNistelrooy]

Yes i was signed in..


Sent from my iPhone using Tapatalk

 

[forcedfuel50]

David, email from Amanda says that #19447 is not out yet. Come to think of it, i did not receive any tracking info..hmmm


Sent from my iPhone using Tapatalk

Correction, she is correct and I am wrong I was looking at order 19477 which went to England. I see on your order you used a forwarding service from Oregon that then transfers it to you in Malaysia. Just a heads up that our tracking will only track it to the forwarding service, not beyond there as we just mail it to the forwarding service you chose and they forward it on to you. It should go out in the next day or two. Sorry for the mix up.

 

[vNistelrooy]

Correction, she is correct and I am wrong I was looking at order 19477 which went to England. I see on your order you used a forwarding service from Oregon that then transfers it to you in Malaysia. Just a heads up that our tracking will only track it to the forwarding service, not beyond there as we just mail it to the forwarding service you chose and they forward it on to you. It should go out in the next day or two. Sorry for the mix up.

Ok David good enough for me! As long as I can get my hands on the ELA. Ive been waiting since last year..whats another 1-2 days [emoji1]


Sent from my iPhone using Tapatalk

 

[Riverboat]

Precise ELA™ V1 Flat Bottom Switch Assembly

Up for sale on the SuperT website...

 

[kscoggins]

Well for now at least, the Strata has been polished to go with my v2.
My Super T family:

 

[vNistelrooy]

Well for now at least, the Strata has been polished to go with my v2.
My Super T family:
View attachment 356342

Can you share the setup pic inside your strata if u dont mind?


Sent from my iPhone using Tapatalk

 

[kscoggins]

They're both pretty simple, 28ga duals right around 1.2ohm.
Simplicity is running ekowool and ELA has cellucotton (which I'm not as proficient with just yet).

 

[vNistelrooy]

Cellucotton have less gunk buildup or its a fresh setup?


Sent from my iPhone using Tapatalk