Premiering The NEW SLIMZY 14500 Mech Mod w/ Mini Geni Mesh RBA Tank - Stainless & Glass

[dannoman]

The NEW SLIMZY 14500 Mech mod w/ Mini Geni Mesh rba tank - Stainless & Glass

Introducing the NEW Slimzy Mechanical Mod by Yiloong! Slim, lightweight and super sexy, this mechanical mod is bottom firing with a spring-loaded, locking button that is easy and comfortable to carry about and hold in your hand.

• Slim 16.5mm width takes a 14500 battery.
• All Pure 316 Stainless Steel construction
• Dual Platforms! The Slimzy comes with two carto/tank tops/platforms. Switch between them to use with a regular 510 carto or tank or an eGo cartomizer such as our Stardust or Mini ProTanks, etc. No adapter needed, simply change out the top on the mod (see pictures)
• Ships with a Genesis style RBA we have dubbed the Mini Geni. The unit comes precoiled with two mesh SS wicks. Produced a very cool native streamlined look.
• GLASS 2.5ml tank (as advertised but we have found it more realistically gauged at 2ml)
• Floating top battery pin
• Completely and fully disassemble-able for easy cleaning and maintenance.
• Comes with spare parts packet with extra mesh, screws, o-rings and a mini-tool
• Venting at base
• Easily lock mod while sitting on your desk by dialing down on the base. Easy to coil up with open design under o-ring secured top cap. You get two spare o-rings if one of them wears out or becomes damaged
• This has an RBA tank with a top fill port.
• Manufacturer recommended coiling for the unit: .9 ohm to 3.0 ohm

Dimensions:

• Just the mod without anything attached: 77mm high and 16.33mm wide (an eGo is around 14mm wide)
• Mod with Mini Geni attached but without removeable tip: 127mm (about 4.5 inches)

The NEW SLIMZY 14500 Mech Mod w/ Mini Geni Mesh RBA - Stainless [gv-SLIMZY14500Kit-Stainless] - $78.95 : GotVapes.com, E-cigarette Supplies - Atomizers Cartomizers Mods Juice and more​

 

[yiddleboge6]

Wow!! that is sleek looking!! Thank you Danno

 

[Drottwiler]

Sweet.....................

 

[woody55]

Ok, you slipped a slick looking little geni device by me! That is impressive looking!

 

[badkolo]

she is sweet looking woody that is for sure and it s a great setup with prerolled mesh with wicks inside and its HQ all around and well built by yiloong, between this and the fogger 3.5 they did a heck of a job and all STAINLESS STEEL

 

[woody55]

I may have to add one to my collection.

 

[badkolo]

I may have to add one to my collection.

but have you been a good boy, thats the question?? lol love ya woody

 

[woody55]

I am always GOOD! LOL

 

[Magius]

That is awesome!

 

[Magius]

Okay, I ordered one. Any chance you'll have extra mini geni available in the future?
Alternatively, will you ever have more of the of the Mini Cobra Genesis RBA's, or are they a discontinued item?

 

[badkolo]

Okay, I ordered one. Any chance you'll have extra mini geni available in the future?
Alternatively, will you ever have more of the of the Mini Cobra Genesis RBA's, or are they a discontinued item?

ill check on cobra and yes after the holidays in china we will get some mini gens

 

[wolfstone5]

I've been hankering for a small device like the Slimzy. I'm gonna have to get one! My only concern is if the 14500 can carry the load. Who can recall when the 14500 was in the limelight? It has fallen from grace with the advent of the 18mm batteries. My very first mod used a 14500 or stacked CR2's for that 6 volt, burned e liquid experience. Those were the days! Back to the subject at hand...does anyone know which 14500 battery would work the best in this particular device?

 

[VapingTurtle]

Nevermind. I musta been off on e-gotvapes or sumpthin.

 

[rdsok]

I've been hankering for a small device like the Slimzy. I'm gonna have to get one! My only concern is if the 14500 can carry the load. Who can recall when the 14500 was in the limelight? It has fallen from grace with the advent of the 18mm batteries. My very first mod used a 14500 or stacked CR2's for that 6 volt, burned e liquid experience. Those were the days! Back to the subject at hand...does anyone know which 14500 battery would work the best in this particular device?

The eFest IMR 14500 700 mah batteries like those carried by GotVapes have a amp load of 8C... which equates to a max of 5.6a output. Using a battery at their max values is hard on them... so I'd say try not to exceed around 4-4.5a ... since the lower amps you pull... the longer the batteries will live.

 

[Papa_Lazarou]

Very sleek unit. Great to see some smaller form factors with that functionality.