Protank 2/3 on Mech mod?

[kyogen]

Is it ok to use Protank 2/3, AeroTank on mech mod like Panzer clone? The only battery i have is sony vtc4 18650 2100mah. Will that work?

 

[Munnin]

You can but I don't see why you would want to personally. It will vape decently bit with most Kanger stock heads, it may be a "light" vape off a fresh 18650 and your mod needs its own air supply(in form of air channels). Some mechs do, others don't.

 

[Munnin]

An Aspire Nautilus isn't a bad vape off my maraxus mod clone, but mechanicals are really designed for lower ohm vaping. You don't have to sub ohm, but around 1 to 1.5 ohms are great on mechs.

 

[K_Tech]

1. Yes, it's okay.
2. Yes, that's a great battery.

Just keep in mind that just as with a rebuildable atomizer, your vape quality will decrease as the voltage of the battery drops. With a 2.2 ohm coil and a fully charged battery (4.2 volts) you'll be starting out at around 8 watts, and it drops off from there.

 

[VaperGlock]

I used to take my Nemesis clone with a Aerotank with a rebuilt 1.3 to 1.5ohm head to work with me. The Nemi with a 18500 and a full tank lasts me all day no problem. That was before I got my Kayfun clone.

So to answer your question. Yes, it's perfectly fine. The standard stock heads may not give you the best vape on it for long.

 

[goblindojo]

I use a PT3 with the Kanger airflow control base on a cheap mech clone with aluminium threads. The base is sealed and I can keep it permanently on the mod, sparing the soft threads. Works fine with a 2 ohm head for as long as I ever go before I recharge it.

 

[kappakai]

i use my nautilus on my mech mods, right now my stingray clone. it works perfectly fine, and is nice when i don't want to use my dripper.

 

[dice57]

Is it ok to use Protank 2/3, AeroTank on mech mod like Panzer clone? The only battery i have is sony vtc4 18650 2100mah. Will that work?

........ yeah your gear can EASILY handle the pt.

 

[rhean]

Is it ok to use Protank 2/3, AeroTank on mech mod like Panzer clone? The only battery i have is sony vtc4 18650 2100mah. Will that work?

Yup, use away. That they only work with rbas is a myth. The only caveat: mech mods have no protection from shorts, and protank coils, though premade, are not error proof. I'd suggest getting a digital multimeter and measuring the resistance on the coils just to be on the safe side.

 

[JeremyR]

No problem you just need to go with an ohm that gives you a good vape and power that your wick can keep up with.. 1.4-1.8 is a good bet.