Provari Carto/Clearo Recommendation?

[Baddog]

I am awaiting my new Provari and was hoping someone could recommend a good atty for when it arrives?
Currently I like the Smoktech DC 1.5 Ohm, but my experience with them has only been on Ego's.
I prefer atty's that come in clear. Other posts seem to indicate that the Smoketch DC will work.


Thanks in advance.

 

[JZXJ]

Other posts seem to indicate that the Smoketch DC will work.


Thanks in advance.

I sense a theme, give the Smoktech DC a shot

 

[Riverboat]

I am awaiting my new Provari and was hoping someone could recommend a good atty for when it arrives?
Currently I like the Smoktech DC 1.5 Ohm, but my experience with them has only been on Ego's.
I prefer atty's that come in clear. Other posts seem to indicate that the Smoketch DC will work.


Thanks in advance.

They will work but for a Provari you should use a higher resistance atty...2.2-2.5 is good. Some people like a 3.0+ ohm atty. The 3.0+ ohms do work well but you will need to crank up your voltage which leads to shorter battery run time...

 

[tj99959]

Well you are talking about cartos not atties.

If you are getting a new "V2" Provari the 1.5 ohm DCC works well.

With an atomizer, anything between 2.5 -3 ohms will give you the widest range of wattage to play with on your Provari.

 

[Baddog]

Yes a Provari V2, and yes my bad a carto/clearo.
Thanks I'll definitely try some Smoktech 1.5 - 3.0 DC's.
Any other recommends for favorite carto/clearo's for Provari V2 ?

 

[Kay1959]

In a word? tanks! real tanks...like this one....

Naked CLear Phiniac Tank - Phiniac Rugged Pyrex Glass Tanks

Why? Because a tank like this is going to give you a much better flavor over a clearomizer. Why? Because of the plastic. Get a tank like this and a 3.0 ohm PUNCHED Boge cartomizer.

 

[Baddog]

In a word? TANKS! real tanks...like this one....

Naked CLear Phiniac Tank - Phiniac Rugged Pyrex Glass Tanks

Why? Because a tank like this is going to give you a much better flavor over a clearomizer. Why? Because of the plastic. Get a tank like this and a 3.0 ohm PUNCHED Boge cartomizer.

Thanks Kay, those are nice looking tanks. I've never thought of the plastic affecting the flavour of the juice but it makes sense. I think i might try one.

 

[Baddog]

I was looking at GotVapes Phoenix Bottom Coil Cartos anyone have any experience with these?

 

[classwife]

Yes a Provari V2, and yes my bad a carto/clearo.
Thanks I'll definitely try some Smoktech 1.5 - 3.0 DC's.
Any other recommends for favorite carto/clearo's for Provari V2 ?

I corrected your title for you...changed it from attys to cartos/clearos ...just happened to see it

 

[Burton]

Dude you can use cartos and tanks all the way up and all the way down the ohms chain. I love my cisco spec 3ohm 306 atty at 5.3 volts, and i also love my smoke tech clear dual coil coil carts reading 1.7ohms rocking at 4.6 volts so... It's all up to you buddy and that is the beauty of the provari. It really allows you to explore and own your specific vaping style and needs. Rock those DC's man and try a high voltage 306 atty; It's for direct dripping and you can't beat the flavor and vapor production. Happy exploring my fellow vaper.

 

[bnrkwest]

I was looking at GotVapes Phoenix Bottom Coil Cartos anyone have any experience with these?

I tried these and when they work they are fabulous, but out of 7 I only had 2 working, so not very good odds, I got the higher resistance ones. bnrk

 

[ZooKansas]

I am awaiting my new Provari and was hoping someone could recommend a good atty for when it arrives?
Currently I like the Smoktech DC 1.5 Ohm, but my experience with them has only been on Ego's.
I prefer atty's that come in clear. Other posts seem to indicate that the Smoketch DC will work.


Thanks in advance.

When I got my ProVari, I experimented with a large assortment of atties. I've found that the Ikenvape i06 in either 2.5ohm or 3.5ohm is a match made in vaping heaven for the device. Good luck in your tests, but let me know if/when you get your hands on an i06 if you feel the same way. BTW...ikenvape is closed right now, but you can get them at : iKENVAPE i06 3.5ohm Atomizer

 

[Cloud Wizard]

...and try a high voltage 306 atty; It's for direct dripping and you can't beat the flavor and vapor production.

+1 on the Cisco 306@3.0ohm@5.2v - a really wonderful dripping setup!

 

[Baddog]

Thanks to all who replied, and thanks for correcting my post classwife! Sorry to hear about your failure rate of the Phoenix Cartos bnrkwest ... I just ordered a bunch, so I'll try to remember to let you know if I have better fortune with them, and kudos to you ZooKansas for the link to the i06's, and Burton for the recommendation of the Cisco 306's both look like solid performers and as I've been dripping pretty much from day one I think I'll surely give both these a go ... and thanks for the link Cloud Wizard, that makes it easy.

 

[sonicdsl]

Moved to Provari Forum from New Members