The costs of running this huge site are paid for by ads. Please consider registering and becoming a Supporting Member for an ad-free experience. Thanks, ECF team.

Provari P3 - Need to know what tank...

Discussion in 'New Members Forum' started by Buffalochick, Feb 18, 2018.

Thread Status:
Not open for further replies.
Image has been removed.
URL has been removed.
Email address has been removed.
Media has been removed.
  1. Buffalochick

    Buffalochick Full Member

    Feb 18, 2018
    I"m stepping up, need a good tank to use with my new purchase. I've never built a coil before, but not against trying. Is there a good tank to use that is top filling for these awesome mods? I appreciate all advice. Right now I use the Triton 2 on my box mods. Also have a couple Smok tanks, but not really impressed. I read the thread that is here already on this subject, but I want a top filling tank. I"m not against the Nautilus, but have Triton 2's already, just want to see if they will work, or a better suggestion. TIA
     
    • Like Like x 1
  2. redeuce

    redeuce Ultra Member Verified Member ECF Veteran

    Jul 11, 2017
    Chicago suburbs
    Triton 2, Nautilus 2, Uwell Crown with 1.2 ohm coil, T22. Kabuki clone, but it’s bottom fill.
     
    • Useful Useful x 2
    • Agree Agree x 1
  3. Buffalochick

    Buffalochick Full Member

    Feb 18, 2018
    Right now I use .4 coils with them, is there a better recommendation if I want to keep using the Triton 2's? I appreciate your time.
     
    • Like Like x 1
  4. Topwater Elvis

    Topwater Elvis Vaping Master ECF Veteran

    Dec 26, 2012
    Texas
    Strange, the P3 had a .7Ω minimum & 5amp limit, until v38 firmware came out with a .5Ω minimum resistance & 5.5 amp limit.
    I'm sure it will fire a .4 in a limited power range, but, resistances in the .7Ω - 2.0Ω range will increase the power range adjustability & increase battery life.
    The Triton mini uses the same heads as the nautilus line .7Ω, 1.6Ω & 1.8Ω.
     
    • Informative Informative x 3
    • Useful Useful x 2
    • Like Like x 1
  5. Opinionated

    Opinionated Vaping Master Verified Member ECF Veteran

    Aug 19, 2015
    My Mountain
    • Agree Agree x 3
    • Useful Useful x 1
  6. Buffalochick

    Buffalochick Full Member

    Feb 18, 2018
    • Like Like x 2
  7. Opinionated

    Opinionated Vaping Master Verified Member ECF Veteran

    Aug 19, 2015
    My Mountain
    No.. that's not an RTA. . You buy the atomizers (coils) for it.. it's just like the triton or Nautilus in that it takes factory coils and is not rebuildable.
     
    • Agree Agree x 3
    • Like Like x 1
    • Useful Useful x 1
  8. Buffalochick

    Buffalochick Full Member

    Feb 18, 2018
    Then I might be looking at the wrong thing. That link needs me to select wire, wire spool, wicks and tools... It's funny, I can build a computer, but I cannot master the knowhow for a vape coil...
     
    • Like Like x 1
    • Love Love x 1
    • Optimistic Optimistic x 1
  9. Opinionated

    Opinionated Vaping Master Verified Member ECF Veteran

    Aug 19, 2015
    My Mountain
    That's just element vape.. they hope you'll check some boxes so they can increase the sale. .. it's the same no matter what you buy.. just ignore those boxes and don't check them, as you don't need them.

    Think of it like McDonald's asking if you want an Apple pie with your meal.. your always gonna say no.. lol.
     
    • Funny Funny x 3
    • Like Like x 1
    • Useful Useful x 1
  10. Buffalochick

    Buffalochick Full Member

    Feb 18, 2018
    Okay, thanks. And the best level coil for this tank for just normal vaping? I usually don't go very high, but am slowly increasing with my regular tanks. Usually around 35-45 watts with a smok prince tank on a regular box mod.
     
    • Like Like x 2
  11. Opinionated

    Opinionated Vaping Master Verified Member ECF Veteran

    Aug 19, 2015
    My Mountain
    Your p3 won't go that high.. it does like 20 watts..

    If you go with the zenith you'll likely appreciate the .8 ohm coil and vape it around 14 or so watts..
     
    • Useful Useful x 3
    • Like Like x 1
  12. Buffalochick

    Buffalochick Full Member

    Feb 18, 2018
    A friend of mind has a P3, and its 20 watts is very comparable to the others at 45 it seems. I will give this a try. Thank you so much for your advice and time. I will maybe come back and let you know how I make out.
     
    • Like Like x 3
    • Winner Winner x 1
    • Optimistic Optimistic x 1
  13. Opinionated

    Opinionated Vaping Master Verified Member ECF Veteran

    Aug 19, 2015
    My Mountain
    Do that.. love to hear from you again! We even have a group here just for provari owners.. you would be welcome to join in and say hi!

    ProVarinati Diner & Saloon and Beyond
     
    • Like Like x 2
    • Love Love x 1
    • Useful Useful x 1
  14. Asbestos4004

    Asbestos4004 Vaping Master Verified Member ECF Veteran

    Sep 11, 2013
    Sugar Hill, Georgia
    ProVari and a kayfun is a match made in heaven. If you don't want to build, maybe try a Kabuki .
     
    • Agree Agree x 6
    • Love Love x 1
    • Useful Useful x 1
  15. medleypat

    medleypat Super Member Verified Member ECF Veteran

    Apr 5, 2016
    Frankfort Indiana
    since it only goes up to 20 watts not sure how much vapor you are going to get with a 0.4 ohm coil might want to go to a above ohm coil for better preformance
     
    • Agree Agree x 2
  16. Storm52

    Storm52 Ultra Member Verified Member ECF Veteran

    Supporting member
    Jan 27, 2014
    Shreveport, LA
    Aspire has a 1.8Ω coil for the Triton 2. That would better suit the P3.
     
    • Agree Agree x 3
  17. Frenchfry1942

    Frenchfry1942 Chillin' Verified Member ECF Veteran

    Jan 12, 2014
    Rivanna
    She mentioned flavor as a priority. I don't think the majority of Provari users are looking for a cloud.
     
    • Agree Agree x 5
  18. Opinionated

    Opinionated Vaping Master Verified Member ECF Veteran

    Aug 19, 2015
    My Mountain
    She also wanted top fill.
     
    • Agree Agree x 2
    • Useful Useful x 1
  19. Frenchfry1942

    Frenchfry1942 Chillin' Verified Member ECF Veteran

    Jan 12, 2014
    Rivanna
    So do I. Everything seems to be 25mm these days. I am still using Kayfuns because I like to tinker with an RBA. Nice to find a top fill with RBA that is a flavor chasers. Also need 3+ 30ml tank.

    Thanks Opinionated.
     
    • Like Like x 2
    • Love Love x 1
  20. Frenchfry1942

    Frenchfry1942 Chillin' Verified Member ECF Veteran

    Jan 12, 2014
    Rivanna
    I just looked at the Toptank Mini and Nano and they look like a step forward from the Subtank.
     
    • Like Like x 1
    • Agree Agree x 1
Thread Status:
Not open for further replies.

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice