Punch Fusions and tanks question

[daniel5383]

I have been out of the loop for a while and have seen everyone going to tanks recently...Last tank I tried was the MAP tank back in the day and didnt really care for it..But I recently seen the fusions made to fit in tanks...Will these fit in any tank? Is there tanks that someone reccomends? The vivi nova? Does the fusions work good with that? I feel like a noob again lol..I have only been vaping standard fusions on a provari for the longest now and wanted to try something new...Thanks! And also, im waiting for the stock to be updated!! been using some knock off fusions for the last week or two waiting till they come in...please hurry mail guy lol

 

[5cardstud]

Hey Daniel great to see you back again. I think that tank will work. I use the M1A1 tank from notcigs right now but Isaac has a tank or two in the works right now. The Fusion has the same size both width and length as any other 510 carto. It just has the 801 base fused to it. The regular Fusions work good in the regular sized tanks and the Mega Fusion works in the longer tanks like the M1A1 XL.

 

[daniel5383]

thanks 5 card...i knew if nobody else would post, you would so the punch fusions will fit into a vivi nova alright and i can just put them on the provari with the adapter and everything is peachy?

 

[5cardstud]

thanks 5 card...i knew if nobody else would post, you would so the punch fusions will fit into a vivi nova alright and i can just put them on the provari with the adapter and everything is peachy?

Daniel Isn't the ViVi Nova an atomizer tank with the replaceable heads? The Fusion or no other carto will work in those if it is. I know the Fusion will work anywhere a standard 510 carto works but I don't know about the Vivi Nova. Sorry if I mislead you in my earlier post but after looking online I saw what they were.

 

[daniel5383]

yea i think so...just seen so many posts about tanks, i assumed that you could just remove those heads and put the fusion punch in it...thats why i was asking so you can use that m1a1 from notcigs and just put a fusion punch in it, fill it up and vape away right? does it leak? or have you had any problems?

 

[5cardstud]

Mine doesn't leak. Neither one does. Some people tighten the screws too tight and that causes leaks but you can order them without screws. I'm anxious to see the one Isaac is going to bee selling. Should be here any day. I'm currently using one I made from an atomizer tank I redid. I was looking at my Vivi Nova and it looks like it would work except I don't know if the threads are the same but the top cap wouldn't work anyway. Besides it works good enough the way it is for those flavors I just take a few puffs off of.

 

[daniel5383]

thanks good to know...i was just checking out the m1a1 and it seems pretty nice...maybe if issac's tank is ready by the time i do my mass order of sr and lr fusions, i will add a tank to my order along with some punch fusions

 

[5cardstud]

I like the M1A1 because the ends are thin. The MAP tank I got, the ends take up half the tank area.

 

[Iken]

Mine doesn't leak. Neither one does. Some people tighten the screws too tight and that causes leaks but you can order them without screws. I'm anxious to see the one Isaac is going to bee selling. Should be here any day. I'm currently using one I made from an atomizer tank I redid. I was looking at my Vivi Nova and it looks like it would work except I don't know if the threads are the same but the top cap wouldn't work anyway. Besides it works good enough the way it is for those flavors I just take a few puffs off of.

Hey J5,
The Fusion tank that we have coming isn't anything special like the M1A, there isn't really any modifications. I went the straight approach, toss in a fusion, fill, and go for the first run. I have been using a gift that was sent me to a while back by a friend called the liquidnator, thats as far as my tank experience been. So I want to get a better grasp before adding any bells and whistles. You have me intrigued with the screws though. May I ask what is the purpose for them?


Welcome back Daniel,
Just to help confirm, the Nova heads can be replaced but no more really. Everything else is set in stone basically.

 

[5cardstud]

Hey J5,
The Fusion tank that we have coming isn't anything special like the M1A, there isn't really any modifications. I went the straight approach, toss in a fusion, fill, and go for the first run. I have been using a gift that was sent me to a while back by a friend called the liquidnator, thats as far as my tank experience been. So I want to get a better grasp before adding any bells and whistles. You have me intrigued with the screws though. May I ask what is the purpose for them?


Welcome back Daniel,
Just to help confirm, the Nova heads can be replaced but no more really. Everything else is set in stone basically.

It is a fill port but also was/is so the tank don't slide up and down but if you tighten it to far it warps the tank. I never use mine. Here's what they look like.

But you know the best one and it's a one of a kind.

 

[daniel5383]

issac do you think the fusion tank will be in when the fusions are in stock..id much rather include them in my order and would rather get from you then make another order at notcigs just for that tank...i sure wish the fusions would hurry up and get in lol...these knock offs arent as good and are only emergency backups and only got a couple left

 

[5cardstud]

Fakes are never as good but when someone comes up with a great product everyone tries to cash in.

 

[daniel5383]

i dont want fakes, but i run out of fusions and every time i run out, either there is no stock or the sites been down, so i have ordered 2 boxes and just use them for emergency backups

 

[5cardstud]

i dont want fakes, but i run out of fusions and every time i run out, either there is no stock or the sites been down, so i have ordered 2 boxes and just use them for emergency backups

A guys gotta do what a guys gotta do. Something is better than nothing.

 

[Iken]

issac do you think the fusion tank will be in when the fusions are in stock..id much rather include them in my order and would rather get from you then make another order at notcigs just for that tank...i sure wish the fusions would hurry up and get in lol...these knock offs arent as good and are only emergency backups and only got a couple left

Sorry Daniel, I'm thinking on putting caps back on our stock as there have been a few complaints of always running out of stock. We were in a good fluid motion before we got hit by the scammers over the Philippines. Old story, but the damage certainly is not healed and there are masses of funds still missing and prohibiting us from making large and standard orders. The Fusions and tanks are both sitting in NYC just waiting to be dispatched. I don't understand the hold up but I'm fairly certain they will arrive together any day now.

It is a fill port but also was/is so the tank don't slide up and down but if you tighten it to far it warps the tank. I never use mine. Here's what they look like.

But you know the best one and it's a one of a kind.

You can say that again, I appreciate the look of them and very much that they are unique. I think I'm crossing threads here, but the sphere tank, I just can't stop thinking about it! Going to check post history

 

[5cardstud]

I'm still using this one with great success and it holds a lot of juice.

 

[Iken]

I'm still using this one with great success and it holds a lot of juice.

Yep! 5ml to be exact! Is that an o ring on top of the 801 fitting? Dude, I still can't dislodge the carto from the bottom cap!

 

[5cardstud]

Put it on a socket or something to support thr tank and put a small rod in it and hammer it out. or like I did and grab the atty with a vice and pry it out. If you put a .... plug in the fill hole it will not leak and it's much better with the atty. The oring wasn't needed but I put it on before I figured out the fill hole was the problem.
I still use mine every day. I love it but wished I would have figured out the leak before taking out the atty.
Tanks work on a vacuum like a dog waterer. No air in= no juice leaking out. Until you take a puff and pull it out into the carto/atty. Hence the air bubbles you see on the holes in the carto/atty when you take a puff.

Now if I just had some nice Tobacco Gold to put in it.

Sorry for the dig, I love ya buddy.

 

[dDubs]

Yep! 5ml to be exact! Is that an o ring on top of the 801 fitting? Dude, I still can't dislodge the carto from the bottom cap!

Is that an atomizer tank? I think I saw it in the new section on the IKV site. I have been wanting to try Nhaler's/Vaperfexions reactor tank, but its a little pricey.

 

[5cardstud]

Is that an atomizer tank? I think I saw it in the new section on the IKV site. I have been wanting to try Nhaler's/Vaperfexions reactor tank, but its a little pricey.

Yes it was an atty tank. If you get one you better use less nic in it. I have never used a better atty tank than this one. It seems to put more nic in the puff but it really vaped well. Great vapor production and taste but I had to slow down on my vaping because I got dizzy from nic overload. This one got messed up so I put a Fusion in it (very hard to do) and it isn't meant to be taken apart nor re-used so don't get one for that purpose. I'm getting another one as I said because I really liked it. It's like a Fusion on steroids.