punched cartomizer with flange

[dherrington]

Does anyone know where I can get punched cartomizer with flanges for tanks. Whenever I order it seems to be hit or miss whether the flange is there.

Thanks.
Doug

 

[AlB53]

hoosierecig.com

 

[Baditude]

@dharrington:

You didn't say what length of tank you have or what length carto you need. Cartotanks come in two lengths, 35mm (standard length) and 45mm (XL or DCT) tanks. Likewise, cartomizers come in two different lengths to fit the two lengths of tanks.



I'll take an educated guess that what you need is a pre-punched XL length cartomizer with a flange. Smoktech tank replacement cartos will almost always have a flange. I have a list of about 20 online vendors that sell pre-punched, single coil cartomizers in this link. Click the links in that blog article to go to the vendor websites to see if the cartos they sell have a flange.

E-Cigarette Forum - Baditude - Blogs

 

[Vapor Vinny]

It also matters whether or not you have a locking tank, as those require the flanged tank with two flat ends. Try Surevapes.

 

[dherrington]

I have a Boge F15 tank. Or rather I had one. I just threw the damn thing away. I used it fine for awhile until I either started getting defective cartomizers or the end wouldn't come off the tank and I wound up wasting juice. So many people use tanks there must be decent ones. But the Boge f15 isn't it. Can you recommend a good 5 or 6 ml tank and cartomizer tank that isn't going to cost me $50 or more? I like the flavor from a cartomizer better but I obviously need one of higher quality.

Thanks
Doug

 

[Vapor Vinny]

These work great, the locking tanks, and do not leak. And well built. Buy them somewhere else though.

Parts & Tanks Without Cartomizers - Tanks - Cartomizers - E-Cig Parts

These work awesome as well. Rubber end caps and not the plastic. Never had any issue with these types.

Smok Tech 5ML Dual Coil Tank Cartomizer (Smoke)

 

[Baditude]

I never recommend any tanks that cost less than $20. You get what you pay for, IMO.

I recommend either the IBTanked for pyrex or My Vapor Store's polypropylene model; both for under $30 for a complete tank kit. Both will be safe to use with the tank-cracking flavors.

IBTanked - Get Tanked With Us!

510 Pro DCTank Combo

 

[Vapor Vinny]

I never recommend any tanks that cost less than $20. You get what you pay for, IMO.

I recommend either the IBTanked for pyrex or My Vapor Stores polypropylene model; both for under $30 for a complete tank kit.

View attachment 228016 View attachment 228017 IBTanked - Get Tanked With Us!

View attachment 228018 510 Pro DCTank Combo

Those MyVaporStore tanks can be had elsewhere, for much less. Have you tried the Artemes tanks? They hold up really well, although sometimes it's a pain to find the flanged/flat cartos. More vendors are carrying them.

 

[White Rabbit]

I agree with Vapor Vinny. I have been using the Artemas Tanks from madvapes.com for the past 6 months. The bare tank is $8.49 and you get MUCH MORE than you pay for. They use the flanged Smoktech cartos available from cryatalclearvaping.com
510 Cartomizers

I have tried over 10 different tanks, some costing up to $40 and the Artemas tank is superior to all of them. I would like to find a stainless steel tank that used flanged cartos if anyone knows of such a product.

Best Wishes
Wabbit