My 20cc syringes finally came in and just made my first syringe tank on a boge 3.0 (still waiting on the 2.0 dual coils to come in). So far, it's been vaping like a champ with no leaks or flooding.
-
Need help from former MFS (MyFreedomSmokes) customers
Has any found a supplier or company that has tobacco e-juice like or very similar to MFS Turbosmog, Tall Paul, or Red Luck?
View thread
- Status
I'm trying to prep up for the incoming 5v FBM, and frankly... I need some help!
I'm really wanting to use this with a tank I recently got from the classifieds (a 3ml Liquinator). I've looked high and low for either some standard sized Boge 3.0 ohm in stainless steel or, after hearing all the great things they do with 5v mods, some of the dual coil 2.0 ohm cartos in stainless steel (either in SS, 'cause although I can punch the holes just fine I loathe peeling and Goo-B-Gone'ing labels). I can't seem to find these in stock anywhere at a decent price right now. Anybody have any suggestions?
All I have on me right now are 510 threaded 1.7 ohm Megas in SS I'm using at 3.7v. I love my moustache alot and would hate to frizzle fry it off attempting these on that 5v mod!
Any recommendations would be greatly appreciated, y'all. I'd hate to get this bad boy box mod in and end up not being able to use it with anything.
I'm really wanting to use this with a tank I recently got from the classifieds (a 3ml Liquinator). I've looked high and low for either some standard sized Boge 3.0 ohm in stainless steel or, after hearing all the great things they do with 5v mods, some of the dual coil 2.0 ohm cartos in stainless steel (either in SS, 'cause although I can punch the holes just fine I loathe peeling and Goo-B-Gone'ing labels). I can't seem to find these in stock anywhere at a decent price right now. Anybody have any suggestions?
All I have on me right now are 510 threaded 1.7 ohm Megas in SS I'm using at 3.7v. I love my moustache alot and would hate to frizzle fry it off attempting these on that 5v mod!
Any recommendations would be greatly appreciated, y'all. I'd hate to get this bad boy box mod in and end up not being able to use it with anything.
check Welcome to SmokTek - The Better Smoking Alternative - Your source for personal vaporizers, e-cig supplies and e-liquids. He has a pretty good selection of ss cartos.
Check out VaporAlley - Stroll down the alley for great products. Great prices on Boge SS 3.0's and DC's. Use coupon code ECF for 5% off.
Crystal Clear Vaping has great deals especially with the 15 pack, but I don't think he has the boge's in SS. I purchased these Mega XL HV 2.0 ohm dual coil cartomizer for use in my syringe tanks (the same size as the 1.7 resurrector cartos).
And speaking of those 2.0 ohm dual coils, they came in and am currently vaping on one in a new syringe tank. Great flavor and TH. They also are not getting as hot as the 2.0 dual coil Mega XXL cartos I was trying last week.
And speaking of those 2.0 ohm dual coils, they came in and am currently vaping on one in a new syringe tank. Great flavor and TH. They also are not getting as hot as the 2.0 dual coil Mega XXL cartos I was trying last week.
Yeah, CCV is normally where I grab cartos from. Seems I completely missed the restock on Boge 3.0 SS--gotta' be fast. So far it's looking like Vapor Alley has the best deal.
Those Resurrectors are nice; those in SS are what I'm using right now. Thought about trying to flibulate one into the 3ml tank but that was my head's panic button kicking in and I pulled back.
Thanks for the recommendations and PMs, all! They're greatly appreciated.
Those Resurrectors are nice; those in SS are what I'm using right now. Thought about trying to flibulate one into the 3ml tank but that was my head's panic button kicking in and I pulled back.
Thanks for the recommendations and PMs, all! They're greatly appreciated.
I did receive my box and I love it (It's been about a week and a half). It fit perfectly into my small hands and doesn't shock people in public as much as my e-power did with the mega dual carto. Keep up the good work and I may be ordering another for the holidays!!
Sup folks! Been busier than a one-armed wallpaper hanger getting my stock back up on 5v and vv. Stock should be good starting tomorrow.
However, I am low on batteries and chargers AGAIN. I ordered them 2.5 weeks ago and they told me today they are out of stock for another week or two. then add 5 to 14 days for shipping. I just ordered a bunch today retail, and should be here by Saturday.
So, all mods sold will be mods only until my batts and chargers get here.
I still have Foxy Wood 3.7v bottom feeders available. #3 is sold, and #4 was adopted by me. #1 sold as well. ( All take an 18650 battery)
Here are photos of #2. The price is $110 and includes everything pictured. Shipping is $5.25 priority with tracking. It is made of solid mahagony, maple, and walnut.
I will put up number 5 again later tonight, or you can go back a few days and see it there.
However, I am low on batteries and chargers AGAIN. I ordered them 2.5 weeks ago and they told me today they are out of stock for another week or two. then add 5 to 14 days for shipping. I just ordered a bunch today retail, and should be here by Saturday.
So, all mods sold will be mods only until my batts and chargers get here.
I still have Foxy Wood 3.7v bottom feeders available. #3 is sold, and #4 was adopted by me. #1 sold as well. ( All take an 18650 battery)
Here are photos of #2. The price is $110 and includes everything pictured. Shipping is $5.25 priority with tracking. It is made of solid mahagony, maple, and walnut.
I will put up number 5 again later tonight, or you can go back a few days and see it there.
Attachments
The bottom two photos are of $5. Price at $110 plus shipping. That does it for the Foxy Woods for a few weeks.
First 5v incoming. Let the stalking begin. Excitement levels are at CODE RED!
Hey Steve! Things look like they're coming along great! I have one person that'll be getting a 5V in the next week and probably go through me and I'll need a few for the small storefront we started in a few weeks 
Excellent! I would be happy to oblige 
I sure appreciate it Bob.
Steve
I sure appreciate it Bob.Steve
Hey Steve! Things look like they're coming along great! I have one person that'll be getting a 5V in the next week and probably go through me and I'll need a few for the small storefront we started in a few weeks
I am caught up on all orders, and am just waiting on payment of a single 3.7v mod and later today, and tonight I will start working on some Foxy Custom 5v mods in an array of colors. They take (2) 18350 batteries, for a total mah of 2200. That is about 20% more than my standard 5v box, but in a much more beautiful enclosure. Stay tuned for some photos later today, or this evening.
Batteries and chargers should be here either Saturday, or Monday. I have also found a new supplier I am going to try out, but for now, I am ordering the batteries and chargers from Madvapes.
Steve
Batteries and chargers should be here either Saturday, or Monday. I have also found a new supplier I am going to try out, but for now, I am ordering the batteries and chargers from Madvapes.
Steve
Think I will be on the list for a 5v once the batteries and chargers come in. This will be my first mod and am starting from scratch.
Had some trial and error, but am finally vaping very happily on 2.0 dual coil syringe tanks on my 5V FBM. Pictures of my latest build below. The dual coil is listed at being around 1.8ml, and the tank is right about at 6ml total volume.
I for one love the 5V mod. Tons of vapor and if you have to get up in the middle of the night, you can vape AND find your way in the dark with the LED.
Last edited:
- Status
Similar threads
- Locked
- Locked
- Locked