Question about eGo-T and Kanger's

[boshans]

So I want to move up to an ego-t, since right now I am just using a blu, which you all know...well I don't even need to explain. Anyway...I am going to get two 1000mAh ego-t batteries...but I don't know if I should get the Type-A or Type-B atomizers for it. I know type-b atomizer lets you use the type-b tanks, that holds more...but does it vape better? How long do the atomizers last? I don't want to have to keep buying atomizers every week.

I was looking at the Kanger T2 and T3 also, and the M3. Should I just get one of those? I think I might pick up some M3's just for the hell of it, can you even use the M3 with the ego-t? Should I? Are the M3 better to use with the ego-t then just the regular ego-t tanks? Also, what is better the Kanger T2 or T3? What is the difference besides having the heating element on the top or the bottom? Are the T2 and 3 disposables? Or can you just wash them or whatever and use them indefinitely? Also you could use the t2 and t3 with ego-t right? Wait so...the M3, T2 and T3 all have their own atomizer built in? So basically I wouldn't even need to get the ego-t atomizer unless i wanted to use the ego-t tank?

Sorry so many questions...there's just so many damn things you can get, I just want to have the best setup to get the most vapor, throat hit I don't care about, mass quantities of vapor though is what makes me satisfied.

 

[Haktuspit]

Skip the Ego atomizers... my Dad guinea pigged those for me and I'm glad I didn't try them.

All I can say about Kanger is that I've only had Evods... but I love them.

 

[rotku]

I use the Kanger T-2 after a disappointing affair with Vivi Novas. The T-2 has a bit more warmth and flavor. You would want to get the lower resistance heads ( 1.8 ohms). Based on Ohms Law the eGo T puts out about 3.4 volts. (3.4 x 3.4 = 11.56, 11.56 / 1.8ohms = 6.4 watts) 6.4 watts is a comfortable range for flavor and vapor production. The same would apply to the T-3 and MT-3.

 

[boshans]

By head do you mean the LR atomizer for the ego-t? Not like a LR T2 right? Because all I see is one kind of T2. The T2 I see is 2.4 ohms.

 

[boshans]

Ahh nevermind I found one...you mean this right? Kanger T2 Rebuildable Clearomizer - Purple (LR)

 

[Lessifer]

If you go with anything besides the type a or b tanks and atomizers you won't need the atomizers, all clearomizers(clear tube, with wicks) have a built in atomizer. The Kanger T3, T2, MT3(same as a T3 just with a metal outer tube), EVOD, and the new Pro Tank all have replaceable atomizer heads, when the atomizer part goes bad you just replace it(keeping the tank part). The replaceable heads can usually be found with varying resistances, though the original head is usually around 2.4 ohms.

 

[rotku]

The Kanger replacement heads come in three resistances 1.8, 2.4, and 2.8. They are sold out at DiscountVapors but here is what it looks like.
Kanger T2 Rebuildable Clearomizer

 

[dbeast64]

Go with the T3's,they fit the eGo batteries without an adapter and with proper care,will last a couple of months. Every 3 or 4 refills,I clean the tubes w/ dawn dish liquid,rinse well and then drop the tube and the base in everclear or vodka to get rid of the excess water. I have a mini and a full size and have replaced the 'flavor bars" with cotton and they are vapor monsters. Easy to clean and easy to refill,worth the $$$ for sure

http://www.e-cigarette-forum.com/forum/e-cigarette-maintenance/359402-how-do-i-clean-kanger-t3.html

A rebuilding link....
http://www.e-cigarette-forum.com/forum/smokeless-image/389241-anyone-try-rebuild-their-t3-yet-2.html

 

[boshans]

I guess I could just try both the T2 and T3 since they are both like...5 bucks, not going to break the bank or anything. Since the T2 has the top coil, that means the vape would be hotter right? How hot are we talking about? I kind of like cool vapor, well I guess I never really had warm vapor so I maybe I would like that to.

Oh one other thing...to use pass through with the ego-t batteries you need to get a certain battery that allows that right? Not all the ego-t batts have pass through?

 

[dbeast64]

The T2 being a top coil will be a little warmer than the T3 but,in my opinion,the T3 is easier to work with cleaning & filling. I "had" a Vision VT top coil that I loved but,since I got the T3's it's been gathering dust

 

[rotku]

There are plenty of people that swear by both types. Your idea of trying both is great. There are probably other options you will try before you find your perfect vape. Cheers.

 

[Iusedtoanalog]

Hi Boshans. You are on the right track, try them both see which one you like. The newer t3 variant is the evod, which in my opinon is nicer than the t3. But if you have a hard time finding them the t3 will be a good stand-in. Enjoy. Happy Vaping.

 

[boshans]

Thanks guys...I just orders a few T2's, T3's, and eVods, along with a few coil replacements, so I guess we'll see which one I like the best. Figure it's never a bad thing to stock up on stuff, with all the crap going on with legislation, so why not. Just ordered an ego-t kit also, can't wait...going to be sooo much better than Blu. I already have 6 bottles of Johnson Creek, tried refilling the Blu cartomizers, but it doesn't work to well, can't really taste the flavor. Can't wait to actually taste the pure juice and not this burning filling in the Blu carts.

 

[Haktuspit]

Thanks guys...I just orders a few T2's, T3's, and eVods, along with a few coil replacements, so I guess we'll see which one I like the best. Figure it's never a bad thing to stock up on stuff, with all the crap going on with legislation, so why not. Just ordered an ego-t kit also, can't wait...going to be sooo much better than Blu. I already have 6 bottles of Johnson Creek, tried refilling the Blu cartomizers, but it doesn't work to well, can't really taste the flavor. Can't wait to actually taste the pure juice and not this burning filling in the Blu carts.

You can never go wrong having too many clearo's... actually I've found you can't go wrong having too much of anything. Except juice you hate. I didn't have much luck refilling Blu carto's with Johnson juice either.

 

[boshans]

You can never go wrong having too many clearo's... actually I've found you can't go wrong having too much of anything. Except juice you hate. I didn't have much luck refilling Blu carto's with Johnson juice either.

Yeah you get a little bit of the flavor, but I don't know, it just doesn't work good...maybe cause I'm using the Red Oak line, hence it's VG. On second thought that shouldn't matter since Blu carts are VG based anyway. I'm using Blu vanilla...only luck I've had is topping it off basically right after you open a brand new cart. But then you just get a tiny bit of the JC flavor, and mostly the Blu cart.

 

[itisken]

I have been using the T3's for a couple of weeks and love them. The T2's were to hot IMHO....but to each his own. Anyone trying to jump on DIY rebuild of clearomizers.....the T3's is the easiest I've done to date(Kanthal 32 and Bamboo Wick)

 

[SirSteve]

Thanks guys...I just orders a few T2's, T3's, and eVods, along with a few coil replacements, so I guess we'll see which one I like the best. Figure it's never a bad thing to stock up on stuff, with all the crap going on with legislation, so why not. Just ordered an ego-t kit also, can't wait...going to be sooo much better than Blu. I already have 6 bottles of Johnson Creek, tried refilling the Blu cartomizers, but it doesn't work to well, can't really taste the flavor. Can't wait to actually taste the pure juice and not this burning filling in the Blu carts.

I have the Kanger T2 and MT3, all I can say is I like them both. Really good choice getting a variety to try. If I may make a suggestion, when you get some extra money, try a Ego Twist or Vision Spinner, it'll add a whole new dimension to your game. And either should work just fine with your ego t charger and your clearo's. You are well on your way, happy vaping.

 

[USMC0311]

Have the Kanger MT3 and liking it. I can't wait until my Kanger Protank comes in!!

 

[boshans]

I have been using the T3's for a couple of weeks and love them. The T2's were to hot IMHO....but to each his own. Anyone trying to jump on DIY rebuild of clearomizers.....the T3's is the easiest I've done to date(Kanthal 32 and Bamboo Wick)

How hot do they get? Is there any certain way you have to smoke the T2 or 3's by the way? I mean I know long slow drags are better for ecigs in general, but is it any different than that compared to cartomizers?\

I have the Kanger T2 and MT3, all I can say is I like them both. Really good choice getting a variety to try. If I may make a suggestion, when you get some extra money, try a Ego Twist or Vision Spinner, it'll add a whole new dimension to your game. And either should work just fine with your ego t charger and your clearo's. You are well on your way, happy vaping.

The twist is variable voltage right? To be honest I don't really know what that means. Well I know what varying voltage means, but why does that help with vaping ecigs?

 

[itisken]

No certain way you have to smoke them. Just the design of the T2 has the head near the top of the tip. The T3 is a bottom coil design and it doesn't get warm at all. My apologies when using the word "HOT" when drawing from the T2.....It's gets warm quickly.....to warm for my taste.