Ran into a video…

Status
Not open for further replies.

zoiDman

My -0^10 = Nothing at All*
Supporting Member
ECF Veteran
Apr 16, 2010
41,314
1
83,834
So-Cal
Taking batteries out of a Battery Pack and using them in an e-Cigarette is almost always a Very Bad Idea.

In that Video, that guy say's that what he harvested was Samsung ICR18650-26F Cells. And they were a "Good" 18650 Cell. Here is 2 Performance reviews for that cell...

Samsung 26F 5.2A 2600mAh Bench Test Results...just not worth it

https://lygte-info.dk/review/batteries2012/Samsung ICR18650-26F 2600mAh (Pink) UK.html

So what were are looking at is Basically a 5A CDR 18650. Which is a Very Low CDR for anyone using more that about 12 or 13 Watts on a Regulated Mod. And something that should NEVER BE CONSIDERED if using a Mech Mod.

There is also the Issue when one has to De-Solder the Tabs off Battery Pack batteries that are in Parallel or in Series. Because Excessive Heat while De-Soldering a Battery Tab can Damage a Cell.
 

UncLeJunkLe

ECF Guru
ECF Veteran
Verified Member
  • Nov 29, 2010
    10,524
    2
    28,337
    Clown World, USA
    This is only a good idea for a vaper if you
    • know what you're doing,
    • know what your getting and
    • know that what you're getting is safe for you to be vaping with.

    Unfortunately, there is some possibility that some day vapers may have to buy battery packs (at full price) so that we can obtain batteries to keep our mods running.
     

    Rossum

    Eleutheromaniac
    Supporting Member
    ECF Veteran
    Verified Member
    Dec 14, 2013
    16,081
    105,222
    SE PA
    Unfortunately, there is some possibility that some day vapers may have to buy battery packs (at full price) so that we can obtain batteries to keep our mods running.
    And if that ever happens, you want power-tool packs, because they use high-drain cells.
     
    Status
    Not open for further replies.

    Users who are viewing this thread