-
Need help from former MFS (MyFreedomSmokes) customers
Has any found a supplier or company that has tobacco e-juice like or very similar to MFS Turbosmog, Tall Paul, or Red Luck?
View thread
RBA Question
- Thread starter bilbobaggins30
- Start date
- th_trl_thread_readers 0
-
- Tags
- protank
- Status
Are you looking for a dripper or a tank, silica, or genesis?
There are so many rbas out there these days, when I got my first rba, the bulli a2 was the only mass produced available.
You may have better luck asking in the rebuildables sub forum
There are so many rbas out there these days, when I got my first rba, the bulli a2 was the only mass produced available.
You may have better luck asking in the rebuildables sub forum
go for the octopus smoktech RDA. its a nice beginner RBA thats got huge potential as your skills grow.
its got thumb screws, no tools needed. decent amount of space to work with, which is big for a beginner. and out of the box, it uses silica, which makes things easier for a beginner. you can of course switch over to mesh or cotton or whatever down the road.
lots of options and for less then $10, its a no-brainer. once you master the RDA, graduate to a genesis style atty. and have fun!
its got thumb screws, no tools needed. decent amount of space to work with, which is big for a beginner. and out of the box, it uses silica, which makes things easier for a beginner. you can of course switch over to mesh or cotton or whatever down the road.
lots of options and for less then $10, its a no-brainer. once you master the RDA, graduate to a genesis style atty. and have fun!
http://www.reosmods.com/index.php?p...category_id=32&option=com_virtuemart&Itemid=3
Can't go wrong with it, need some kanthal and silica wick. Look on youtube about building coils, and on that one it has a tiny holes on the posts that you slip the wire through and screw down the post, I believe anyway. Don't like it? You're out like 10 bucks. Need a mechanical mod with an imr battery, or get 32 gauge kanthal and get the ohms up to above 1.2 and you can get it on a vv device
Can't go wrong with it, need some kanthal and silica wick. Look on youtube about building coils, and on that one it has a tiny holes on the posts that you slip the wire through and screw down the post, I believe anyway. Don't like it? You're out like 10 bucks. Need a mechanical mod with an imr battery, or get 32 gauge kanthal and get the ohms up to above 1.2 and you can get it on a vv device
I personally bought a Phoenix clone for $10 and am loving it. Easy to rebuild, and a great introduction IMO. I just bought a Vision Eternity to add to my collection, have heard good things about it. Honestly, I don't see what makes such a big difference between a lower end rebuildable and a higher end other than materials used in build. Do the more expensive ones even affect the flavor that much?
From everything I've read targeted to noobs (like me) the RSST or the AGA T2 seem to be mentioned most often....or the new IGO L or S if you want a drip atty.
RSST by SmokTech | AC9 Clone Natural Smok
http://www................../AGA-T2-with-pyrex-tank-RBA-Drip-Tip-not-Included_p_154.html
IGO-L Rebuildable Stainless Steel Dripping Atomizer
Good luck! I have mine ordered.
RSST by SmokTech | AC9 Clone Natural Smok
http://www................../AGA-T2-with-pyrex-tank-RBA-Drip-Tip-not-Included_p_154.html
IGO-L Rebuildable Stainless Steel Dripping Atomizer
Good luck! I have mine ordered.
These are the 3 RBAs which I started with. They are an excellent way to get your feet wet.
- Andy . . . Challenge the day.
oh. well if your looking into a tank style one, the ones that use SS mesh are my preference. there are silica tanks out too like the drunker which may be easier for a noob, but i like the hit you get from the mesh. of course there is more of a learning curve to mesh rebuildables than silica.
but anyway the RSST looks noob friendly with that spring-loaded pos pole.
the AGA-T is awesome. no spring loaded pos pole, but it does have a neg post that you just insert the lead, then screw down the post, rather than tryign to clamp the lead against the base with the neg screw. makes things a bit easier. youll know what we mean once you get one of these things in your hands and begin messing around with it.
I just ordered the $4 pheonix clone from reosmods. I started a few months ago rebuilding my vivi novas, then I went to the drunker tank, which I really enjoy. If you want to get into the ss mesh rba's.. the rsst is a good one to learn on.
- Status
Similar threads
