RBA's and Dripping Questions

[ZEN2014]

What exactly is an rba and how do you drip? What are the advantages and stuff? How much does an rba cost and what are some good models of them (I think they're like small cartomizers?)

 

[Dakota Jim]

RDA's (rebuildable dripping atomizer) will range from around $4 up to around $100+ (custom hand made)

you actually drip your eliquid down the drip tip on a regular basis - this is great for tasting new eliquids and there are quite a few people that do this almost exclusively due to a better taste and vapor production

It is inconvenient to do this while driving or actually requires your undivided attention for long periods of time

here are some youtube vids to watch

What is direct dripping an e-Cig? - YouTube

and

A PBusardo Review - Smoktech RDA & Micro Coils! - YouTube

hope this helps some

Want to come down to my dungeon, I mean basement, and see my mods? ​

Sent from my Commodore 64 using PokeNPeck

 

[Shopan]

You Drip by Dripping Juice into an atomizer or onto a Coil. A nice RBA to start would Be a IGO-L or -W...a Phoenix is not bad as well. All will run you about 10 bucks from the US. They are NOT like cartos. an RBA you build your coil and wick it yourself. there are a Million and 1 videos on how to do do this.
I like dripping because I can switch flavors as fast as I can clean my wick. With XC-116 once it taste dry a quick blow through with the switch on and I am ready for another flavor....I find the Flavor is much better than in any Clearo system I have tried and with the Pheonix I can get a good ten drops witch last me enough to go in and shop...
I do not suggest putting a RBA on an Ego at all...something with a chip is a MUST! a Mutil meter to test your coils is also Nice as you do not want to put a Low ohm coil on some devices and you want to see what it reads before putting it on a Mech...
If I can answer anything else please ask away...

P.S.
Please Join CASAA - The Consumer Advocates for Smoke-free Alternatives Association and Like on FB if possible. We all need to Ban together for the Sake of what we Do....the Drama can Wait..

 

[ZEN2014]

You Drip by Dripping Juice into an atomizer or onto a Coil. A nice RBA to start would Be a IGO-L or -W...a Phoenix is not bad as well. All will run you about 10 bucks from the US. They are NOT like cartos. an RBA you build your coil and wick it yourself. there are a Million and 1 videos on how to do do this.
I like dripping because I can switch flavors as fast as I can clean my wick. With XC-116 once it taste dry a quick blow through with the switch on and I am ready for another flavor....I find the Flavor is much better than in any Clearo system I have tried and with the Pheonix I can get a good ten drops witch last me enough to go in and shop...
I do not suggest putting a RBA on an Ego at all...something with a chip is a MUST! a Mutil meter to test your coils is also Nice as you do not want to put a Low ohm coil on some devices and you want to see what it reads before putting it on a Mech...
If I can answer anything else please ask away..

Would my new pretty MVP2 be okay with one?

 

[Shopan]

Would my new pretty MVP2 be okay with one?

Indeed...I am Dripping on One Right Now...

 

[Truetopath]

Would my new pretty MVP2 be okay with one?

Sure would, you just have to build your coil above 1.2ohms


CASAA member 2013

Sent from my iPhone using Tapatalk - now Free

 

[ZEN2014]

Alright guys. So what would you suggest I start with if I'm going to use it on my MVP2 and I'll just be starting building my own coils? I want one that if I need to mess with stuff to make it work, it's fairly easy. Also I don't want something super heavy if it just has drips in it. I saw the Kayfun Lite Clone (bored looking) at fasttech is like 93 grams. Holy cow. I would also like to be able to see into the tank to see how much juice is in there

 

[RubyRoo]

Would my new pretty MVP2 be okay with one?

Oh yeah! The MVP can read the Ohms of your build as well, so it's a great device for RDAs. You don't HAVE to get a mod to drip either. Just be sure to build your dripper high enough and you can easily rock it with a VV eGo battery no problem. This is a photo of my Igo-L on my Smoktech Winder, a VV eGo style battery. You just need your build to be around 1.5 Ohms to be safe to fire on an eGo. I usually use my dripper on my mech, but it can be done with an eGo, no worries.

 

[RubyRoo]

I love the IGO-L is my go to dripper. Love Eckowool in it though a ton prefer cotton.

Right!? I got mine in a trade with a fellow vaping friend and I wasn't sure I'd like it, but it is really performing well for me. Great for testing new juices and I love cotton in mine. Cheers!

 

[ZEN2014]

What do you guys like and dislike about the Igo-L?

 

[Vaslovik]

I can't speak to the IGO-L as I have an IGO-W, but as regards dripping v. RBA's I have to say my preference is for the RBA's. I tried the dripping thing, found it didn't suit me and I didn't care to have to drip more juice into it all the time, or replace the cotton all the time. For me an SS mesh wick and 28 kanthal coil with a 3ml tank of juice is what does it. I can vape for hours on that without having to mess with it.

I did the whole dual microcoil thing and cotton and silica and all that with the dripper. Nah....

Love my RSST gennie setup

 

[emus]

YouDe UD RBAs are quality made, cheap and stocked by USA vendors.
Many clones are low quality and cheap.