Well, since you took the plunge...there are "slam caps" in ultem and delrin and media blast available direct from Odis, too. If I got an O-atty, I'd need one of those, too...
RDA Round-Table Discussion and Lookout
- Thread starter Mr.Mann
- Start date
- th_trl_thread_readers 0
- Status
I might have to sell a couple of things to fund all the extras 
The media blast cap is very tempting
The media blast cap is very tempting
Hi guys,
Didn't know the OMG atty was being produced in a limited run. Why would you stop making something you can keep selling and clearly have the means to produce on a large scale?
I am a big fan of the O, I have two in fact. Flavor is very close to a NarDA but with more airflow, which is nice to have. I think many people will regret not jumping on getting one when they are no longer available and selling at NarDA prices.
As for the slam caps, I didn't like that they had integrated tips as I was worried they would get too hot. I only ordered the Ultem one as I figured it was the safest bet. Was tempted by the media blasted and heat treated SS ones though!
Also for those with the O, be careful tightening down the screws, I overtightened one the other day with a fused Clapton and had it snap on me! Luckily spares are included and I just used another screw to thread it all the way out through the bottom.
Didn't know the OMG atty was being produced in a limited run. Why would you stop making something you can keep selling and clearly have the means to produce on a large scale?
I am a big fan of the O, I have two in fact. Flavor is very close to a NarDA but with more airflow, which is nice to have. I think many people will regret not jumping on getting one when they are no longer available and selling at NarDA prices.
As for the slam caps, I didn't like that they had integrated tips as I was worried they would get too hot. I only ordered the Ultem one as I figured it was the safest bet. Was tempted by the media blasted and heat treated SS ones though!
Also for those with the O, be careful tightening down the screws, I overtightened one the other day with a fused Clapton and had it snap on me! Luckily spares are included and I just used another screw to thread it all the way out through the bottom.
To anyone interested, psyclone mods is making an rda. Not sure about release, I just found out about it. But it looks like another NarDA/m-atty/P1 mash up but there claiming it'll have more availability and a cheaper cost. We'll see. There's only so many pics for now, the one on the mod it's on the left. The Hadaly RDA.
Sent from my SM-G925V using Tapatalk
OMG I am completely in love with the design of this atty, literally everything I've longed for in a rda. My favorite build is a beefy single Clapton-style coil and this atty looks like it was made just for that. The way the airflow comes in through the bottom of the posts to the bottom of the coil is genius. Can't wait to get my hands on one!!
Im right there with you on this one, the Hadaly peaked my interest as soon as I saw it, especially considering the price point its being offered at. Can't beat gettin the Atty, plus a 1 piece Ultem top cap for $91 before tax and shipping.
Has the hadaly been released yet? Unfortunately the site is down for maitenance
I've been waiting for the Halady as well... just worried about leaking with that airflow placement.
Only a 50 piece "pre-release". The rest are coming this month.
Thanks for the quick reply I was debating getting my pre order last second for the o Atty but I keep going back and forth over the price ahhhh
Seeing the price on this hadaly im in for one for sure !!!!!
Seeing the price on this hadaly im in for one for sure !!!!!
Yeah, no kidding! And, they plan on having more than enough available-- none of this limited release BS. I want to get one just to support people doing business the right way.
So much this
I put my pre order in at Vape happy just to make sure i didnt get shinyitis for something Else however I did not see any of the aforementioned accessories (slam caps/ultem/delerin and or matchy matchy drip tips ) also it looks like it might come with a BF pin and if not I'll have to pick one of those up also. I am very excited for the hadaly so thanks for the heads up peoples as I had no clue it even existedwho's doing preorders?
derrrrrp. nvm - now I see you named one...
It comes with a BF pin. The caps might only come directly from Psyclone Mods. It's all supposed to go on sale in the middle of the month.
No problem. Usually I'd be worried about shinyitis kicking in for me as well but I'm actually trying to downsize my collection right now. There are only two attys I want right now and both come from Psyclone mods: the Hadaly and the Kryten.
Here's what I am currently wondering about
Goon LP
I like the goon but its big and really caters to volume over flavor that being said it does have alright flavor for what it is. Also by the time i choke the air down to what feels right to me it just dosnt vape right and the vapes is choked out. However a much shorter goon with a higher degree of control over airflow actually sounds good for either dual coils or using some more advanced coil types that I am unable to use in my Narda or Hobo 3.1.
The Doode RDA
I have to admit I really just want to try out the chuck/deck system however I'm not sure if I want to try it badly enough to drop $60 on it. Regardless not really my cup o tea
O-Atty
Unfortunately I might have to pass on this guy and pick up the clone. It looks amazing but dash vapes in Canada is the last place still offering pre orders and it would be $170 shipped ugggghhhh
Prophet RDA
Again not my ideal RDA (it seems 90% of the market is focused on large footprint large vapor atomizers) however it looks like you can toss a nice sized single fused clapton in it close it off a bit and get some pretty good flavor and vapor from it.
Does anyone here have anything else they are hyped or excited about ???? Hook it up peepz I don't cruise instagram nor am I members of any FB groups so I hardly have the scoop on anything new
I build my own Clapton's and other advanced wire varieties and its one of my favorite things about this hobby and part of my problem is that my taste in vaping has gravitated towards smaller chambers and tighter controlled airflow which just does not jive well with framed staggered staple wire lol however I recently started experimenting with micro Clapton's and have some really nice 2x28gx40g and also 2x30gx38g Clapton's that still put out more flavor then round wire yet are cool enough to be vaped in smaller RDAs.
Goon LP
I like the goon but its big and really caters to volume over flavor that being said it does have alright flavor for what it is. Also by the time i choke the air down to what feels right to me it just dosnt vape right and the vapes is choked out. However a much shorter goon with a higher degree of control over airflow actually sounds good for either dual coils or using some more advanced coil types that I am unable to use in my Narda or Hobo 3.1.
The Doode RDA
I have to admit I really just want to try out the chuck/deck system however I'm not sure if I want to try it badly enough to drop $60 on it. Regardless not really my cup o tea
O-Atty
Unfortunately I might have to pass on this guy and pick up the clone. It looks amazing but dash vapes in Canada is the last place still offering pre orders and it would be $170 shipped ugggghhhh
Prophet RDA
Again not my ideal RDA (it seems 90% of the market is focused on large footprint large vapor atomizers) however it looks like you can toss a nice sized single fused clapton in it close it off a bit and get some pretty good flavor and vapor from it.
Does anyone here have anything else they are hyped or excited about ???? Hook it up peepz I don't cruise instagram nor am I members of any FB groups so I hardly have the scoop on anything new
I build my own Clapton's and other advanced wire varieties and its one of my favorite things about this hobby and part of my problem is that my taste in vaping has gravitated towards smaller chambers and tighter controlled airflow which just does not jive well with framed staggered staple wire lol however I recently started experimenting with micro Clapton's and have some really nice 2x28gx40g and also 2x30gx38g Clapton's that still put out more flavor then round wire yet are cool enough to be vaped in smaller RDAs.
I have the same feeling about the Goon. I use it (or the Mason 24) when I want a change of pace but it mostly sits on the shelf. The flavor is better than I would've thought considering how much airflow it has but it still pales in comparison to the NarDA or Drifter. And that's fine as it's not intended to be a flavor chasing atty. The Goon LP is somewhat intriguing. Would be awesome to trade the 24mm Goon for one lol
No interest in the Doode or Prophet. I'd be interested in the O-Atty if it wasn't ridiculously priced.
Another one I'm somewhat interested in is the Kennedy Trickster. The thing holding me back is I had a Kennedy Comp and didn't care for it. The Trickster is the same atty but 24mm with a two post deck, adjustable airflow, single coil mode and comes with a BF pin. The price ($99) isn't unreasonable but a bit more than I'd like to pay for an atty I've already tried and didn't care for. Not sure if the single coil mode would be worth a damn considering how big the chamber is.
I don't really know of many other RDAs out here or coming out later. The ones I do know of that you haven't mentioned are all hard to get and too expensive.
No interest in the Doode or Prophet. I'd be interested in the O-Atty if it wasn't ridiculously priced.
Another one I'm somewhat interested in is the Kennedy Trickster. The thing holding me back is I had a Kennedy Comp and didn't care for it. The Trickster is the same atty but 24mm with a two post deck, adjustable airflow, single coil mode and comes with a BF pin. The price ($99) isn't unreasonable but a bit more than I'd like to pay for an atty I've already tried and didn't care for. Not sure if the single coil mode would be worth a damn considering how big the chamber is.
I don't really know of many other RDAs out here or coming out later. The ones I do know of that you haven't mentioned are all hard to get and too expensive.
- Status
Similar threads
