RE: Sigelei mini and subtank mini...?

[Qastal]

Hey guys, i've got a problem, my vapor production gets way too hot when i vape, sometimes its okay but most of the times its like im having a fire in my mouth, what ive noticed is that on the screws of the rba build that screws also heat up (the part where the screws touch the wire) and i try lowering the wattage to even 13 watts but it still occurs.

ADDITIONAL INFO:
1. 0.6ohms
2. i dont have another mod so i cant test anything
3. cant use occ cause building it is just such a hassle
4. When i heat it up both screws make smoke/vape

 

[Katmar]

Bump for an answer!

 

[Katmar]

Bump again!!!

 

[Hans Wermhat]

Something is not right there. The screws might get warm, but the wire has much lower resistance and electricity is lazy. I follows the path of least resistance without fail. The wire should melt long before the screws get that hot. If a piece of the coil is touching both posts, that might be it. (Direct short.) Are you using a mech or a reg'd mod?

 

[Qastal]

Something is not right there. The screws might get warm, but the wire has much lower resistance and electricity is lazy. I follows the path of least resistance without fail. The wire should melt long before the screws get that hot. If a piece of the coil is touching both posts, that might be it. (Direct short.) Are you using a mech or a reg'd mod?

its a reg mog, sigelei mini

 

[Darth Omerta]

Any part of the coils touching the posts?

 

[Qastal]

Any part of the coils touching the posts?

what do people mean by posts?

 

[dhood]

I assume you mean you're using the RBA deck. If so, make sure the wires from the coil are not sticking out past where the screws capture them. If they stick out even a little, they are probably making contact with the chimney and shorting out. I have three Subtank minis and all of them work fine on my Sigelei mini

 

[Darth Omerta]

what do people mean by posts?

The posts are the things that you screw the coil into. Depending on your deck there might be 2, 3 or 4 posts. If your coil is touching them then it will short out, it will also short if the coil touches the walls of the chimney, or the base of the deck