Rebuildable Tank Atomizers - An Anthology, Pictorial, Builds and Reviews.

[dems86]

I think it would be a perfect stealth set up on a 1337mm Swabia, displacing the Flash e

lol

Haha, I remember the Swabia, MASSIVE!!!

Mark Bugs is the only man who knows how to do dna tube mods

BTW Mtek, VapourDay is only 13 hours away, I'm so flippin excited to order a two-tone Piccoloid I'm about to pee my pants!!!

 

[Mtek]

Yup, I'm pretty excited on the piccaloid too

 

[qorax]

Mark Bugs is the only man who knows how to do dna tube mods

Absolutely true.

 

[qorax]

Sedge takes it to a court session and gets arrested



Jk. I mean well for my friend/s.

 

[dems86]

Sedge takes it to a court session and gets arrested



Jk. I mean well for my friend/s.

Excuse me sir, where exactly were you planning on "sticking" that thing?

 

[Mtek]

Absolutely true.

I bought the Erlk as they sit nice on a wae, then it wasn't the rba for me So I didn't get one. I know that gem is going to launch soon, so I'm back to needing a wae.

 

[dems86]

I bought the Erlk as they sit nice on a wae, then it wasn't the rba for me So I didn't get one. I know that gem is going to launch soon, so I'm back to needing a wae.

Yeah, the 21mm Tile sits very nicely on it too. I'll throw pretty much anything on it while I'm at home, I just love how it feels so much, I don't care of something is 21mm when I'm relaxing at mi casa

 

[skin_e1]

I think it would be a perfect stealth set up on a 1337mm Swabia, displacing the Flash e

lol

Sir please don't beat me with that thing, I'm not resisting, I'm just trying to change my coil. It's a mod! I swear on my "Mother's Milk!"

 

[dems86]

Two Tone Piccoloid is OTW!!!

My first Vapour Day (VD cherry popped ).

Oh boy I can't wait, my 5 "NEW" AW IMR 14500 Batteries have been delivered, so I'm ready and rearin' ta go. Have a feeling this bad boy is going to be my driving/work setup, and laying in bed setup, oh garsh I'm geekin' on thoughts of Piccoloid dancing in my head!!!

 

[sedge]

I contacted the ebay seller about the drill bits. He is currently out of stock and so is his suppliers and he has no idea when he'll have stock again.

 

[dems86]

I contacted the ebay seller about the drill bits. He is currently out of stock and so is his suppliers and he has no idea when he'll have stock again.

Looks like I ordered JUST in time, whew

 

[qorax]

My review with a Spheroid Rebuilding tutorial here: http://www.e-cigarette-forum.com/fo...coloid-circa-2015-pictorial.html#post15478834

 

[Dizzo]

My ataman 2 has finaly hit the states
Sure wish I had a plan on how to build it. The lack of talk from those who got one kinda worries me. Hope it's not a disappointment.

 

[sedge]

My ataman 2 has finaly hit the states
Sure wish I had a plan on how to build it. The lack of talk from those who got one kinda worries me. Hope it's not a disappointment.

Dizzo I use my v1 every day. I've been so slammed I haven't had time to play with several new toys including the v2. I've never been disappointed by anything from Bashik.

 

[skin_e1]

My ataman 2 has finaly hit the states
Sure wish I had a plan on how to build it. The lack of talk from those who got one kinda worries me. Hope it's not a disappointment.

It looks beautiful out of the box. I was so happy until I built it. I think I posted it before, but the draw is so tight. I emailed Alexsandr about the airflow before I bought it and he told me it was 2.2 mm. I thought, that's great! I can't measure to see if it is 2.2 mm but it's tighter than my PhenomenoN zest base. Maybe it's because of how it has the exteneded air-hole I don't know but it's too tight for me and I'm kinda disappointed. I built it twice thinking there must be an air hole or something that I'm missing. I looked on the bottom, then checked the sides and then became saddened when the reality sunk it. If you like a tight draw you will love it, but if you like it more airy like a Prometey 3, Phenomenon, Kayfun 4, Taifun GT 2 and the list goes on. You may want to drill it out. It is officially the most tight draw atomizer I have and that's by a long shot. I honestly am tempted to sell it since the airflow don't meet my needs, but like I said before it is very beautiful I hope that helps. For people who don't like tight draws I can't recommend it

 

[roxynoodle]

My borrowed Heron and Tilemahos arrived yesterday. The Tile was a pretty straight forward build I thought, although I would like to try a couple more things quickly before I return it to its owner. Anyone do a vertical on this? Or a dual, stacked build?

The Heron confused me a bit, but its vaping very well so I guess I didn't mess up I thought I did, but I vaped it like crazy and its still going fine. I wanted a head to head comparison to the Prometey so same build and same juice. I couldn't do the same mod due to the hybrid connection. I only had one mech it would work on. I might test them today with both running on a DNA30 at the same setting. I have a ZNA clone with 20 x 1 threading that I changed the chip in. However, on test one, I think the Heron has a slight flavor edge over the Prometey. The Prometey is much easier to build, for me anyway. It didn't help the Heron has the tightest tolerances I've ever seen. Dissambling and assembling hurt both my wrists pretty badly, and yes, I lubed everything on reassembly. So I don't think the Heron is for me due to my arthritis.

 

[dems86]

Always fun to try new attys, huh Roxy?

Too bad the Heron is too tight for you to piece together/apart easily. I think the sexiest looking setup I own is the Heron x Paps v3. Wonderful vape, of course, but it just looks so damn good

Interested in more of your thoughts on the overall vape experience with the Tilemahos

 

[dems86]

Oh btw, I'm using The Calix in "dripper" style mode right now with some Wakonda. I can't believe how well it works like this, without the channels blocked. Just....wow.

 

[roxynoodle]

Both of them are beautiful. The Heron is much prettier than the mech its on . I can say the same for the Tile, which ended up on an istick 50W due to the deep air channels in the 510. With the air going through the 510 pin, you need to use certain mods with it. I would like to try it on a Stingray as they have a lot of top venting.

I'm reserving judgement on the Tile for the moment. Sometimes it takes a good 24 hours to break in the build. I'm also not in love with the juice I put in, so its not fair for me to really compare it at the moment. I do think its good looking and well made. I think its easy to build, like a Taifun with a big slot. Its very compact. Its also the first version I think?

 

[dems86]

Both of them are beautiful. The Heron is much prettier than the mech its on . I can say the same for the Tile, which ended up on an istick 50W due to the deep air channels in the 510. With the air going through the 510 pin, you need to use certain mods with it. I would like to try it on a Stingray as they have a lot of top venting.

I'm reserving judgement on the Tile for the moment. Sometimes it takes a good 24 hours to break in the build. I'm also not in love with the juice I put in, so its not fair for me to really compare it at the moment. I do think its good looking and well made. I think its easy to build, like a Taifun with a big slot. Its very compact. Its also the first version I think?

Oh, your rocking a Tile without the ADV base, gotcha!!! I'm considering sourcing a non-adv base for the Tile v2 when those go back up for sale. I think it was anavidfan who liked the airflow better coning through the 510 on the original.