Rebuilt my protank head, works great

[rushman]

I rebuilt my protank head with a single 3mm silica wick and a 6/5 wrap 32 gauge kanthal. Came out to 2.4 ohm, draw is a touch stiffer, and it produces a good bit more vapor. Very happy with it. It's super easy to rebuild too which is nice.

Anyone else have success with different setups?

Sent from my Nexus 4 using Tapatalk 4 Beta

 

[E_DeCastro]

i rebuilt my with evod heads 6 turn coil 32g kanthal but i used a cotton ball for a wick and 1mm silica for flavor wick. i rebuild 7 of them las night.

 

[kabonk]

I double 2.5mm silica and don't use a flavor wick, give it 4 raps 32g they comes out to right around 2 ohms

 

[Cheechako]

Rebuilt Protank, Evods and T3's tonight...very little difference once you have it down and I use cotton.
When it comes time to rewick, just pull out the old cotton and insert new, fresh vape!

 

[cerver7]

I've been doing a double 2mm silica with 5 wraps of 32g kanthal. Ohming at 2.1-2.2. Very nice. Stiffer draw, less gurgle if any and simple to do.