Red Sky Mods - Part Two
- Thread starter Capt' Brian
- Start date
- th_trl_thread_readers 0
- Status
yep i agree very nice looking batch! hey Cappy, what do i owe ya for the door, I got the shipping notice....
I'm really sorry to hear this. It should never be hard for people to get their hands on a RSM. I'm gonna look into this for a bit and get back to you, hopefully I can give ya a quick fix. If not I could most likely set you up a quick Paypal based shopping cart with less hassle.
Ahoy and good morning. Off to answer the PM's, doesn't look like anyone doubled up on calling dibs, so no worries, I will start sending out invoices in a few. Just need a bit more coffee to get me started moving, arrrr
Self bump;
Self bump;
Ok, I give up. I will do it the old way, blew half my day fussing with the website.
If you see a mod you would like, just send me a PM with the mod number and I will send a PayPal invoice to your E-Mail address (please provide E-Mail address if you have not purchased from me before).
Do not, for the love of pirates, mention e-cigarettes when using paypal.
First come first serve. Priority mail shipping with insurance is $5 bucks.
Click on any thumbnail for bigger picture.
They are posted on the website also if you want to look there; Red Sky Mods - Home
Mark-6 #607 $175 - Curly tiger redwood / Mulberry
Mark-6 #608 $185 Curly tiger maple / Wenge with Tiger engraving painted black.
Mark-7 #736 Cocobolo / Purpleheart - Reserved - Compass rose engraving
Mark-8 #841 $175 - Mahogany / Chakte Viga
Mark-8 #842 $ 185 - Marble wood
Mark-8 #843 Sold - Bocote / Curly tiger redwood
Mark-8 #844 Sold - Zebra / Rengas tiger
Mark-8 #846 Sold - Leopardwood / Wenge
Mark-9 #921 $135 - Leopardwood / Teak
Mark-10 #1001 Reserved - Gabon Ebony / Bloodwood - Engraved
Mark-10 #1002 $145 Curly Tiger Maple
Mark-10 #1003 Sold - Cocobolo / Gabon Ebony - Macassar ebony inlay bracketed by Padauk pinstripes.
Mark-10 #1004 $145 - Dual Curly Tiger Maple & Macassar Ebony body / Macassar ebony ends and door (pretty ain't it)
Mark-10 #1005 Sold - Padauk / Gabon Ebony - Engraved w/Celtic knot pattern
Again, more info, internal pictures and descriptions can be found on the website - Red Sky Mods - Home
I will update this list with "Sold" as payments are received. Did I forget anything? Arrrrr
Gonna take a nice break after this batch, nice long break, oh yeah....
Be back later.
The Mark 9 is just super for anyone with an all-day-vape. A good LR atty, big battery (the AW ICR 2600 mAh test really well), a fresh 6 ml of ADV, and life is good 
Ahoy! The Website is back up and running, updated with remaining mods including a couple last minute Mark-10 additions. Let's switch to ordering from the website now. Invoices for orders through PM's have been sent.
Red Sky Mods - Website
Arrrr!
Red Sky Mods - Website
Arrrr!
My mark 9 goes to work with me everyday! I drive an hour each way and it is a great riding buddy! My Cutlass stays at home because...it's a Cutlass LOL! And I just got #1005 Mark 10....can't wait!
Hey Cappy, I'm not sure but I think the description is wron for number 1002.. you have curly maple with Gabon Ebony ends and it looks like the entire mod is curly maple!
Good catch matey! There were a few things wrong in the descriptions, thats what happens when your in a rush. Thanks!
Beautiful batch...as usual Cappy!! Can't wait for the NEXT batch...with Destroyers this time *woohoo!!*
Well, posted the last two Mark-10's that are ready on the website.
I got a few vaping supplies in today that I ordered, I basically only use titan atties on a bottom feeder, but I ordered some 1.5 and 2 ohm dual coil single hole atties for tanks, put a 1.5 ohm in my SS tank, put it in my Mark-10 prototype and have been vaping on it the last couple hours. I must admit that with proper hardware to match the battery the vape is pretty darn good, no, still not as good as a bottom feeder for me, but I think it is definitely almost as good.
I got a few vaping supplies in today that I ordered, I basically only use titan atties on a bottom feeder, but I ordered some 1.5 and 2 ohm dual coil single hole atties for tanks, put a 1.5 ohm in my SS tank, put it in my Mark-10 prototype and have been vaping on it the last couple hours. I must admit that with proper hardware to match the battery the vape is pretty darn good, no, still not as good as a bottom feeder for me, but I think it is definitely almost as good.
ive mainly changed to tanks, i just think its easier for the moment, recently just tried the smoktech dc tanks, and how cheap the tanks are, might switch to those, cappy which one is the 3.7v destroyer? i might have to check one of those out soon, hehe
Those are the Mark-10, basically a destroyer without the regulator board, bit bigger tank hole (.8")
so for the mark-10 it's probably best to use 5v batt or 6v(2x3v) batt. right? unless one has a Kick kickin' around.
I'm just using what I learned from others, 3.7v 18650, 1.5 ohm atty to give around 9.5 watts. Thats about what I'm used to. Tastes pretty right on the mark too.
I Suppose to use a kick you would just have to attach one wire to the ground tab? Never thought about it as it's just cheaper to get a Mark-7 (which I realize I don't have for sale, sorry), arrrr
- Status
Similar threads
