Redilast 18650 Li-ion Battery sales! High quality - Made in Japan / Korea!

Status
Not open for further replies.

JasonK

Unregistered Supplier
Apr 6, 2011
9
0
Redding, CA
www.redilast.com
Redilast Li-ion sales thread!


All of our cells are of the highest quality on the market – guaranteed! We source our cells from the largest and most well respected battery companies! All of our 18650 cells are made in either Japan or Korea. All of the IC’s used are also made in Japan!


These cells are the result of 6 months of R&D. Testing various cells, PCB's, IC's etc, to bring you the highest quality protected cells money can buy!

Thank you ECF for your support!

Now for our cell lineup!

Pictures:

Redilastcells.jpg


Redilastcells2.jpg


batterieswithlight.jpg







P18650-2200:
  • 2200mAh Capacity
  • Protected against: overcharge, overdischarge, short circuit
  • Cell Made in Korea
  • 4.20v±0.05 charge voltage
  • 2.75v cut off voltag
  • 3.6v Nominal voltage
  • Charging type: CC/CV
  • Max charge current: 1C (2.2A)
  • Recommended charge current .5C
  • Max discharge current: 4.4A
P18650-2600:
  • 2600mAh Capacity
  • Protected against: overcharge, overdischarge, short circuit
  • Cell Made in Japan
  • 4.20v±0.05 charge voltage
  • 2.75v cut off voltage
  • 3.7v Nominal voltage
  • Charging type: CC/CV
  • Max charge current: 1C (2.6A)
  • Recommended charge current .5C
  • Max discharge current: 5.2A
P18650-2900:
  • 2900mAh Capacity
  • Protected against: overcharge, overdischarge, short circuit
  • Cell Made in Japan
  • 4.20v±0.05 charge voltage
  • 2.50v cut off voltage
  • 3.6v Nominal voltage
  • Charging type: CC/CV
  • Max charge current: 1C (2.9A)
  • Recommended charge current .3C
  • Max discharge current: 5.8A
redilastbuttontop.png


* All cells are button top cells and make contact in series. They will also make contact with most lights, where flat top cells have issues.

redilastpcb.png


* All IC's used are the highest quality available and are imported from Japan. For our 2200 and 2600 cell, the IC is set to prevent the cell from being discharged below ~2.75v (recommended by the cell manufacturer). Our 2900 cell has low voltage cutoff protection @ ~2.5v (as recommended by the cell manufacturer). Over charge protection is set for 4.28v on the 2200 and 2600 cell and 4.3v on the 2900 cell.


* The design of the PCB allows for discharge currents slightly over 2C. This however exceeds the 2C limit for the Li-ion chemistry. Please do not discharge the cells at rates over 2C.

Cell Sizes:

2200: 68.65-68.75mm x 18.3mm
2600: 68.35-68.50mm x 18.2mm
2900: 68.65-68.95mm x 18.5mm


Please note, all cells are Button top cells and that makes these slightly longer than some other cells on the market. Please check the size above and insure that it will fit in your e-cig / charger prior to ordering.



Pricing:
  • $12.00 – P18650-2200 In stock
  • $14.75 – P18650-2600 In stock
  • $17.75 – P18650-2900 In stock
US Shipping:

usa_flag.gif
Ships from USA. 2-4 day shipping time for USA residents!


USPS First Class Mail: $2.50 for the 1st cell, $0.50 each additional cell.

USPS Priority Mail Flat Rate Box: $6.00 Flat rate! (Up to 10 cells)

*$2.00 Optional insurance. Required for orders over $100!


International Shipping:

USPS First Class Mail International: $3.50 for the 1st cell, $1.50 for each additional.

USPS Priority Mail International Flat Rate Box: $13.50 Flat Rate! (Up to 10 cells)

*$2.00 Insurance is REQUIRED for International orders over $75!


Order Now:

Click here to order from Redilast.com



Thank you for your support and if you have questions, please post!
 
Last edited:

JasonK

Unregistered Supplier
Apr 6, 2011
9
0
Redding, CA
www.redilast.com
welcome to ECF:)

Thanks! :)

Welcome! We have been waiting for your batteries to become avaliable here. I have seen on other forums where the Redilasts are sold that there is a 14500 that is supposed to be comming avaliable. Any word on them?

Yes, 14500's (and 16340 aka RCR123's) hopefully will be available within the next month or two. They should have been ready in a couple weeks, however the PCB company that made our boards used the incorrect IC. Thankfully we only ordered samples, but still, this pushed things back a few weeks unfortunately. I will say that, when ready, the quality and performance of the 14500/16340 cells will be second to none. :)
 

JasonK

Unregistered Supplier
Apr 6, 2011
9
0
Redding, CA
www.redilast.com
When are the next orders shipping. I'm getting antsy.:2cool:

I ship 5-6 days a week usually. I just forgot to post in this thread. :) When your order ships you get a notice from Paypal with the tracking number.


Any idea of what the 14500 mah rating and charge life will be, relative to the AW IMR 14500?

Capacity will be equal to or above 750mAh. Still working out the details. When they are ready I'll post here. :)


Looking forward to trying the 14500's :)

Thanks!
 
Last edited:
Status
Not open for further replies.

Users who are viewing this thread