Reo Mini Review from Reosmods.com

[smokie]

What a nice bottom feeder mod, just has two small issues that are just a pain at times. Please subscribe to me on You Tube for the latest ecig reviews, contests, deals, steals,Events, Giveaways, and special shows YouTube - step07726's Channel

Follow me on Twitter: Twitter

Become my friend on Facebook:
Smokie Elixirtv | Facebook...

Join us on VapeMeet: ElixirTV Viewers, and Homies Page - Groups - VapeMeet

Flavor is in the taste of each individual, subjective, what I like, or dislike you may feel the opposite of, that's why their are 3 ml sample bottles for you to buy, and try first.

You are all invited to come Hang out with us, or any of our shows, so we can all vape together. Our show HawtAngel, and Smokie the Mod Father is on Saturday Nights at 10 PM eastern time Live Stream of www.Elixirtv.com - Video Chat on Stickam.com and ElixirTV.com has shows 24/7 a week eastern time, check the show schedule for changes.

ElixirTV.com Schedule is below, and updated daily:
http://nu-vapor.com/forum/elixirliquid/4737-new-updated-elixir-tv-schedule-ja...

Any Questions? you can always email me at smokie901@gmail.com

Vape On, Vape Hard, and Vape in Public, Fuhgeddaboudit! Smokie The Mod Father of ElixirTV.com

 

[atavanhalen]

you say that 14250s for 6 volts, do they make 3.0volt 14250s? if so where can i buy them?

 

[smokie]

I was referring to the bat size, should of been a little more clearer, they were 3.7 bats, I will have to check to see if they come in 3 volt, now the CR 2 bats volt fit in but the door will not go on, their are just a hair fatter then the 14250. Have to check with Couldsofvapor.com that,s where I got the 14250 bats from.

 

[atavanhalen]

There was a guy last year that imported 100 14250 lifepo4 batts and sold them to vapers on ebay but it does not look like they are for sale anywhere, I would really like to get a co-op together to order some. Let me know if you find any thanks

 

[smokie]

I will bet their are some CR 2 bats that fit with closing the door, just like a lot of other bats that are the same numbers but different in size. I should take a ride to see Bruce of COV, and check out all his bats, since I did find the 14250 by him.

 

[AlmightyGod]

This thread is from the REO Supplier forum and covers the 6v issue on the Mini:

http://www.e-cigarette-forum.com/forum/reos-mods/178410-reo-mini-6v.html

 

[smokie]

well have bats for using it at 7.4 volts, but my attys are only 4.2 ohms need those 5.4 ohm ones for that kind of voltage, trying to find 3.0 bats that will fit with the door sliding on, at home I use 6 volts with two 3 volt CR 2 bats with out the door cover and a 4.2 ohm atty, it vapes awesome at 6 volts.

 

[atavanhalen]

I will bet their are some CR 2 bats that fit with closing the door, just like a lot of other bats that are the same numbers but different in size. I should take a ride to see Bruce of COV, and check out all his bats, since I did find the 14250 by him.

Nope they are actually 14250 lifepo4 3volt batteries, I found them on a trade site but minimum order is 100 batteries, there are also 14240s in the same chemistry and I am sure those would work also.

 

[smokie]

You would think the vendor of the Reo would carry these bats you are talking about since they are in demand, I would but 2, or 3 sets for the mini Reo.

 

[Big Hitter]

You would think the vendor of the Reo would carry these bats you are talking about since they are in demand, I would but 2, or 3 sets for the mini Reo.

I don't think they are in that much demand. 90% of REO owners vape at 3.7 and if you wan't 6v just get a REO Grand.
The REO grand has thicker feed tubing too which it seems you found issue with on your mini.

I own 5 REOs and just got supplies on order to try one of the Grands at 6v.
I have AW lifepo4 batts and IKV 3.5Ω attys on the way to me.

 

[smokie]

I would like to try the Grand, but I do have a journeymen, and a Ali'i in VV, and I have been using 4.2 ohm attys on 6 volts from East Mall which work great, better vapor, and throat hit then the 4.5 ohm attys I use to use.

 

[Amajn]

Obviously the Tube being softer/thinner is so you can easily remove bottle vs a hard tubing where it would be harder to remove the bottle lift bottle unscrew replace .....Why do you need to remove the top cap?? other then cleaning once in a while should not have to be removed

Stacking 3.7 cr2s does not equal 6v
Modfather huh?


semi decent review but it felt like you needed to find a negative (a weak weak one by the way)

vape on

 

[smokie]

Was showing what bats fit and I grabbed which I thought were 3 volts, with knowing 3.7 X 2 does not equal 6 volts, which you just had to point out, Right! so I guess you watched the review semi also or you would of read in the caption of the video when I said that they were 3.7 volt bats?
Now for the whys, because when unscrewing the bottle from the cap alone with the tube hanging, the excess liquid gets all over the place. You may like liquid leaking on your clothes, car, etc but I do not, its only a 3 ml bottle so I need to refill, or replace it with another bottle during the day sometime. And the review was far from negative, I like the Mod, and use it a lot, but it could be tweaked a little, and no comment from you about the door neither that's a surprise. So I guess your No longer a ecig vendor / Supplier? since your back to make your comments on my threads once more.
Please keep Drama free, Vape On

 

[Amajn]

Well Smokie since you mention it i have almost zero issue with the door and if it does slide off in my pocket i just slide it back far from a huge issue i can honestly count how many times its come off on one hand but i agree it can be annoying and depending on your pants/pocket it could be annoying to some ppl .....I watched the vid b4 you did any changes


I'll make a vid showing you the modfather how to properly remove the bottle without getting juice on yourself its quite easy

Ill try to explain it grab a tissue remove bottle place tissue on tube fill bottle then replace and no juice will get all over you all .08 ml of it in the feed tube

and honestly it was a ok review but if all you can do is complain about the softness of the tube which is a positive not a negative aspect then i find it a Very very weak but im not fighting honestly i meant no attack just my opinion

Also comments once more ? i cannot really recall that many comments on your threads i have made but sure ok if thats what you think!!

 

[smokie]

That's cool of you thanks for being upfront, Now the door could use a bottom magnet, and I know what you saying holding a towel or tissue under the tubing when you screw off the bottle. Just so use to the other bottom feeders with the hard tubing were you can just take the entire bottle with cap off the tubing. Was there any reason for them using the soft tubing over the hard one, maybe a better cap seal? not sure. Just would seem a lot easier taking the whole bottle off with the cap, and I do love the mod, and with 6 volts it rocks, I sometimes leave the door off and just use the pouch instead with two 3.0 CR2 bats that are too fat with a 4.2 atty that gives a great hit. this has been one of my travel car Mods now because of the small size, the on and off button and a nice juice well. Will get the Reo Grand soon for that bigger juice bottle it holds, and the 18650, along with 3.0 volt bats for 6 volts. Also love it because of the metal, instead of the wood ones that when dropped can brake apart, Look forward to your how to video. And if you ever find some 3.0 volt bats that fit the mini with the door closing please hit me.up. Thanks for the reply back, chat with you soon, vape on, Smokie

 

[smokie]

Well Smokie since you mention it i have almost zero issue with the door and if it does slide off in my pocket i just slide it back far from a huge issue i can honestly count how many times its come off on one hand but i agree it can be annoying and depending on your pants/pocket it could be annoying to some ppl .....I watched the vid b4 you did any changes


I'll make a vid showing you the modfather how to properly remove the bottle without getting juice on yourself its quite easy

Ill try to explain it grab a tissue remove bottle place tissue on tube fill bottle then replace and no juice will get all over you all .08 ml of it in the feed tube

and honestly it was a ok review but if all you can do is complain about the softness of the tube which is a positive not a negative aspect then i find it a Very very weak but im not fighting honestly i meant no attack just my opinion

Also comments once more ? i cannot really recall that many comments on your threads i have made but sure ok if thats what you think!!

That's cool of you thanks for being upfront, Now the door could use a bottom magnet, and I know what you saying holding a towel or tissue under the tubing when you screw off the bottle. Just so use to the other bottom feeders with the hard tubing were you can just take the entire bottle with cap off the tubing. Was there any reason for them using the soft tubing over the hard one, maybe a better cap seal? not sure. Just would seem a lot easier taking the whole bottle off with the cap, and I do love the mod, and with 6 volts it rocks, I sometimes leave the door off and just use the pouch instead with two 3.0 CR2 bats that are too fat with a 4.2 atty that gives a great hit. this has been one of my travel car Mods now because of the small size, the on and off button and a nice juice well. Will get the Reo Grand soon for that bigger juice bottle it holds, and the 18650, along with 3.0 volt bats for 6 volts. Also love it because of the metal, instead of the wood ones that when dropped can brake apart, Look forward to your how to video. And if you ever find some 3.0 volt bats that fit the mini with the door closing please hit me.up. Thanks for the reply back, chat with you soon, vape on, Smokie

 

[Amajn]

Hey Smokie i did have the 3v 14250s for 6v and used them i bought them last yr froma guy on here who was selling them he had imported them but the only issue was it needed a diff charger because it was a safe chemistry i actually lost them when i was moving

I agree its a great mod all of them are the grand is a powerhouse and i know what you are talking about with the kaj i mod the bottle is removable cap and all

The Reo is more designed to not have to worry about tubing not fitting or leaking by removing it

Also i remove the atty unscrew the bottle half way and blow into the well on top and force the excess juice into the bottle that takes care of most all the juice from the tube then refill maybe you can try that

i believe by having the tube stay on you would never have to worry about it coming out and leaking or any other issues

Vape the system!!!

 

[Stownz]

Appreciate an honest review, never knew the door was only held on with a magnet. Good to know facts like this before buying, too many fanboys with free units only telling the positive aspects of PVs.

 

[emonty]

There was a guy last year that imported 100 14250 lifepo4 batts and sold them to vapers on ebay but it does not look like they are for sale anywhere, I would really like to get a co-op together to order some. Let me know if you find any thanks

AW's LiIon Batteries Sales Thread *Part 12*

I always buy from Andrew, reliable, cheap and fast delivery....

 

[smokie]

I just traded my Mini for a Grand, bigger bottle, and now using 6 volts, Woot!