Return of the tube mods- part 2

[Thrasher]

Slowly but surely, here they come.

Lavatube v3


The pipeline pro

FEATURES

- 5 to 40 Watts

- Up to 12V output voltage

- Up to 15A output current

- OLED display

- Temperature controlled vaping (possible with various wires)

- Heat Protection Function*

- Power Boost Function

- Unregulated vaping possible (‘Bypass’ electronic overload protection)

- Battery shutdown voltage adjustable from 2.5V to 3.0V

- Resistance check

- Displays battery voltage under load

- Adjustable brightness display

- Set the length of time the menu is displayed

- Set the standby time

- Personalise click setting from 0-5 to activate device

- Info menu

- Battery capacity measurable

- Atomizer resistance range from 0.05Ω to 5Ω is possible

- Atomizer resistance from 0.2Ω to 3.5Ω (40W)

- Reverse polarity protection

- Abnormal temperature protection

- Serial Number

- 2 year warranty on the electronics

- Design by Thomas Wilms


Almost the same as dani extreme but cheaper

 

[Jimi D.]

Yeah, with only one battery. BOOOOooooo !!!

 

[dhood]

The mods i use now only have one battery. I kind of like the idea of a tube mod, but I'm not paying $200 for one. I mean, it's not a Provari...

 

[kaahn]

Slowly but surely, here they come.

Lavatube v3


The pipeline pro

View attachment 465645

FEATURES

- 5 to 40 Watts

- Up to 12V output voltage

- Up to 15A output current

- OLED display

- Temperature controlled vaping (possible with various wires)

- Heat Protection Function*

- Power Boost Function

- Unregulated vaping possible (‘Bypass’ electronic overload protection)

- Battery shutdown voltage adjustable from 2.5V to 3.0V

- Resistance check

- Displays battery voltage under load

- Adjustable brightness display

- Set the length of time the menu is displayed

- Set the standby time

- Personalise click setting from 0-5 to activate device

- Info menu

- Battery capacity measurable

- Atomizer resistance range from 0.05Ω to 5Ω is possible

- Atomizer resistance from 0.2Ω to 3.5Ω (40W)

- Reverse polarity protection

- Abnormal temperature protection

- Serial Number

- 2 year warranty on the electronics

- Design by Thomas Wilms


Almost the same as dani extreme but cheaper

What's the diameter? I agree though $200 bucks gees louise!

 

[hashtag]

I wonder how big it is, DNA chip isn't tiny. Is it big like that aspire baseball bat looking tube?

 

[Ryedan]

Slowly but surely, here they come.

Lavatube v3

Yup Thrasher here they come, but this one is a bit behind the times IMO. The DNA40 chip has been surpassed with more power and the ability to dial in different wire materials. The different wire materials is important to me. Though I can reliably use my VS DNA40 with various wire types it would be nice to have accurate temperature protection setup without having to 'finesse' it. I found it on the VolcanoEcigs website and some of the specs are different from what you have in your post. The ones that struck me are these, which are basically the DNA40 board specs:

1-40 watt output.
1-9V output.
15A continuous, 25A peak output.

The price for the mod on the website is $150 and the sleeves are $5 I think.

I'm not impressed. I preferred tube mods until I got my Reo Grand. Then I got the small VS and a Sigelei 150 which I think of as 'The Brick' . Tubes are nice and I'm vaping a Nemesis right now along with the Sig, but I also really like the convenience of the box format. Either way a DNA40 mod at $150 from Volcano is not going to tempt me in any way, shape or form. But that's just me ...

 

[stevegmu]

I thought the Volcano 3 was knurled stainless when I first saw a picture, but it turns out it's just cheap aluminum and rubber...

 

[Thrasher]

Yup Thrasher here they come, but this one is a bit behind the times IMO. The DNA40 chip has been surpassed with more power and the ability to dial in different wire materials. The different wire materials is important to me. Though I can reliably use my VS DNA40 with various wire types it would be nice to have accurate temperature protection setup without having to 'finesse' it. I found it on the VolcanoEcigs website and some of the specs are different from what you have in your post. The ones that struck me are these, which are basically the DNA40 board specs:

1-40 watt output.
1-9V output.
15A continuous, 25A peak output.

The price for the mod on the website is $150 and the sleeves are $5 I think.

I'm not impressed. I preferred tube mods until I got my Reo Grand. Then I got the small VS and a Sigelei 150 which I think of as 'The Brick' . Tubes are nice and I'm vaping a Nemesis right now along with the Sig, but I also really like the convenience of the box format. Either way a DNA40 mod at $150 from Volcano is not going to tempt me in any way, shape or form. But that's just me ...

Becuase the specs are for the pipeline pro, now if it uses the same chip as the dani you can stack batteries for 80 watts

Whats funny is is how many say its not enough, and for them it may not be, but several whats your setting threads show a vast majority still under 40 watts.

With what it costs to r&d higher end stuff like the pipeline/dani. Its not worth it to chase the high power niche