Reuleaux RX 2/3 by Wismec "Dead screen" discussion

[Fozzy71]

I have 2 in daily rotation for 4 - 6 months without any issues. I have another in the stash and plan to order a few more later this year. The only bad I have read on them is the wiring is side is on the thin side. I did have one DOA in 2 battery mode on arrival that worked fine in 3 battery mode but the vendor replaced it.

 

[One Vape Man]

i disassembled my 2/3.. check of its wet cause by the juice... i cleane the 510 and make sure the board is dry... nothing happens... the screen is so dim... sometimes it work but when i press the fire button the screen shuts off

 

[serenity21899]

I'm experiencing a similar issue on one I've had for about 5 months. My screen does not show when I hit the fire button. But sometimes I can hit the button for a second and it will appear so I can get my battery level. I do not have the technical ability to disassemble a mod. My first thought was juice got in it, so I removed the batteries, and let it sit for a few days. I also cleaned the contacts. And it's not in stealth mode. I'm thinking maybe an issue with the button, or the board wasn't soldered properly?

The second one I got a couple of weeks ago, is still working fine.

 

[One Vape Man]

Someone told me from my youtube video to solder that last two right pins from the display WORKS for him...
the 2 pin are so tiny and he told me to use magnifier... PLEASE TRY IT IF IT WORKS.... and HOPEFULLY IT WILL.. please response as soon as possible

this is my youtube video, see his comment here.

 

[One Vape Man]

Yes it did work but this was on a Kanger top Box Mini. It would be a matter of luck as to if it actually shorted a component. If the juice did kill a component then there would be no solution other than a new pc board. In my case removing the ejuice from the pcb and cleaning it carefully as well as the 510 did fix the problem. It was very difficult to reassemble the unit as there were some very small parts. I don't suggest this unless you are experienced with electronics.

it doesnt work for me

 

[One Vape Man]

I'm experiencing a similar issue on one I've had for about 5 months. My screen does not show when I hit the fire button. But sometimes I can hit the button for a second and it will appear so I can get my battery level. I do not have the technical ability to disassemble a mod. My first thought was juice got in it, so I removed the batteries, and let it sit for a few days. I also cleaned the contacts. And it's not in stealth mode. I'm thinking maybe an issue with the button, or the board wasn't soldered properly?

The second one I got a couple of weeks ago, is still working fine.

Someone told me from my youtube video to solder that last two right pins from the display WORKS for him...
the 2 pin are so tiny and he told me to use magnifier... PLEASE TRY IT IF IT WORKS.... and HOPEFULLY IT WILL.. please response as soon as possible

this is my youtube video, see his comment here.

 

[One Vape Man]

Hello all, i created this thread for people which have trouble with his RX 2/3... This problem does not have decision now... What do you think about it?

Someone told me from my youtube video to solder that last two right pins from the display WORKS for him...
the 2 pin are so tiny and he told me to use magnifier... PLEASE TRY IT IF IT WORKS.... and HOPEFULLY IT WILL.. please response as soon as possible

this is my youtube video, see his comment here.

 

[serenity21899]

Someone told me from my youtube video to solder that last two right pins from the display WORKS for him...
the 2 pin are so tiny and he told me to use magnifier... PLEASE TRY IT IF IT WORKS.... and HOPEFULLY IT WILL.. please response as soon as possible

this is my youtube video, see his comment here.

That is way beyond my abilities, but thank you for the input.

 

[One Vape Man]

That is way beyond my abilities, but thank you for the input.

me too.... lol

 

[One Vape Man]

BRIGHTNESS PROBLEM

 

[One Vape Man]

My brother had a similar problem..seems the contacts in the door(s) were dirty..He simply cleaned the contacts and fixed the problem...hope this helps

Sent from my XT1585 using Tapatalk

what contacts do you mean... can you take a pic... where is that thing.. thanks

 

[smacksy]

It was my brother who said he cleaned the batt contacts on the door(s) and mod itself..mind you he lives in another state and I never seen the mod myself.. sorry I can't help more

Sent from my XT1585 using Tapatalk

 

[One Vape Man]

this is the italian page with the same problem
Le Vittime della Wismec Rx 2/3 | Facebook

 

[One Vape Man]

It was my brother who said he cleaned the batt contacts on the door(s) and mod itself..mind you he lives in another state and I never seen the mod myself.. sorry I can't help more

Sent from my XT1585 using Tapatalk

You mean the battery contacts.. the gold one? i tried to dis assemble my mod.. and cleaned it from possible juice and dirt but nothing happens.. the screen stays dimmer and sometimes not working..

 

[smacksy]

You mean the battery contacts.. the gold one? i tried to dis assemble my mod.. and cleaned it from possible juice and dirt but nothing happens.. the screen stays dimmer and sometimes not working..

PM sent

Sent from my XT1585 using Tapatalk

 

[One Vape Man]

FINALLY WE FOUND A SOLUTION!!
DO at your own risk

 

[One Vape Man]

GUYZ I FIXED IT.. PROBLEM SOLVED!!!!!!!

 

[JorJi_3!P]

Okay, this is the solution, but is it safe? I mean that initially they are not soldered together ...

 

[One Vape Man]

yes

Okay, this is the solution, but is it safe? I mean that initially they are not soldered together ...

its safe as long as you're very careful by not touching the other parts of the board with the soldering tool and solder it properly