The new version of the VOOPO family's new packaging design
Open the package, a huge Big Mac is displayed in front of you, with a similar bubble bin next to it (not equipped with a thin warehouse, it is estimated to consider the fuel consumption of the big smoke and the overall shape).
There is a rubber ring, a screwdriver, and a pair of cotton filaments in the fittings.
The beautiful 810 nozzle is oily and lustrous, and it also emits a crystal-like color like a shell. The front and back of the inner bin are the VOOPOO logo and a figure that I don't understand (visually like a bow and a target). The surface is smooth but the introverted color does not seem so exaggerated or too plain.
At the bottom of the 510 general excuse, it is worth mentioning that Voopoo will also be beautiful in the bottom can not see the place, especially the RIMFIRE written beautifully. California design Chinese production is a well-regulated font that makes it easy to see at a glance.
Disassemble large collections
Before I received it, I have been guessing how the structure inside the hood is to introduce the air intake. After I get it, I found that the air intake is similar to the bottom of the old Zeus plus the side air intake. The side port is a horizontal groove, and the left side of the glyph structure will be the rest. The air inlets on both sides of the gas introduction base are blown from the honeycomb structure at the bottom. However, it is much more convenient than Zeus to find the right position of the card slot every time the cover is difficult. Try to rotate it a few times and not directly insert it. Rimfire's inner compartment is quite large compared to the recent hot CPTF. Unlike the CPTF, the holes on both sides are almost attached to the heating wire. The condensation formed by the atomization splash will remain between the cover and the inner cover. Rimfire's condensation basically flows back to the plane of the wire table, and is re-atomized and evaporated. Due to the use of double hair, the smell of smoke oil is not found.
Then I took this Big Mac and several other common atomizers to give you a concrete concept.
Although the official website claims to be 30 diameters, I can see that the bottom diameter is 26. On the outer net, it can be applied to most boxes. If you want to use the pole, you should carefully select the appropriate pole size.
The nonsense said so much that the cotton on the silk began to smash, the process is not shown, everyone is the old driver, I will not get the axe.
The outbreak is still very touching, and I made a double-core Clapton 3.0 six-turn resistor with a power of 0.17 and an open 80W.
Here, unlike other nebulizers, Rimfire has the function of locking the oil tank, so you need to pinch the lower end of the glass cover, but not the base. Counterclockwise, the upper part is screwed onto the cover, and the base is also counterclockwise. On the hood, did you burn your brain? I was distressed twice when I unscrewed the hood to remove the glass. Although the oil filling position has the direction of rotation of the glass hopper, it is different from other atomizers. Dare to force) and the base and the glass and the cover can be rotated even if the thread is not required to be screwed (this is used to open and close the oil inlet). The counterclockwise rotation is a single round hole. Accurately) Rotate clockwise to open all the oil inlet holes a little, and then continue to rotate to close all the oil inlets until the limit is reached.
The value is very good, but as a top-end structure atomizer with 5ML, it is estimated that only QP can be compared, and a heavy box such as X217 or 26650 box will look better.
Because of the large diameter of the oil hole, there will be no case where the CPTF is filled with oil and it will overflow if it has not been injected.
As for the taste, the personal feeling is because of the single shot and the honeycomb at the bottom of the atomization chamber has a certain length of the inlet, so the air smoke is well mixed and will not be very empty. The amount of smoke is quite large, I try Opened to 100W, the voltage is 4.05, you can really do the second suction and pump 10 even if you don't paste it. (There is no test, the double hair is an oil tiger, the silk has to cherish every mouth and suck it slowly.) But not as hot as Petrie and the captain. Currently, I am trying the first warehouse berry chef, very rich and delicate, sweet and heavy, and the sweetness of the berries is like a fresh fruit. The subsequent taste also requires trying more oil.
High face value, large oil tank, oil can be turned off, the air flow structure on the bottom side of the top air intake, and a good taste experience make me feel that although the volume is sacrificed, it is a very good nebulizer with design features.
For the first time, I shared my unboxing and usage experience, hoping to help friends who are interested in this atomizer.
Quoted from @haonanyishenbiao
Open the package, a huge Big Mac is displayed in front of you, with a similar bubble bin next to it (not equipped with a thin warehouse, it is estimated to consider the fuel consumption of the big smoke and the overall shape).
There is a rubber ring, a screwdriver, and a pair of cotton filaments in the fittings.
The beautiful 810 nozzle is oily and lustrous, and it also emits a crystal-like color like a shell. The front and back of the inner bin are the VOOPOO logo and a figure that I don't understand (visually like a bow and a target). The surface is smooth but the introverted color does not seem so exaggerated or too plain.
At the bottom of the 510 general excuse, it is worth mentioning that Voopoo will also be beautiful in the bottom can not see the place, especially the RIMFIRE written beautifully. California design Chinese production is a well-regulated font that makes it easy to see at a glance.
Disassemble large collections
Before I received it, I have been guessing how the structure inside the hood is to introduce the air intake. After I get it, I found that the air intake is similar to the bottom of the old Zeus plus the side air intake. The side port is a horizontal groove, and the left side of the glyph structure will be the rest. The air inlets on both sides of the gas introduction base are blown from the honeycomb structure at the bottom. However, it is much more convenient than Zeus to find the right position of the card slot every time the cover is difficult. Try to rotate it a few times and not directly insert it. Rimfire's inner compartment is quite large compared to the recent hot CPTF. Unlike the CPTF, the holes on both sides are almost attached to the heating wire. The condensation formed by the atomization splash will remain between the cover and the inner cover. Rimfire's condensation basically flows back to the plane of the wire table, and is re-atomized and evaporated. Due to the use of double hair, the smell of smoke oil is not found.
Then I took this Big Mac and several other common atomizers to give you a concrete concept.
Although the official website claims to be 30 diameters, I can see that the bottom diameter is 26. On the outer net, it can be applied to most boxes. If you want to use the pole, you should carefully select the appropriate pole size.
The nonsense said so much that the cotton on the silk began to smash, the process is not shown, everyone is the old driver, I will not get the axe.
The outbreak is still very touching, and I made a double-core Clapton 3.0 six-turn resistor with a power of 0.17 and an open 80W.
Here, unlike other nebulizers, Rimfire has the function of locking the oil tank, so you need to pinch the lower end of the glass cover, but not the base. Counterclockwise, the upper part is screwed onto the cover, and the base is also counterclockwise. On the hood, did you burn your brain? I was distressed twice when I unscrewed the hood to remove the glass. Although the oil filling position has the direction of rotation of the glass hopper, it is different from other atomizers. Dare to force) and the base and the glass and the cover can be rotated even if the thread is not required to be screwed (this is used to open and close the oil inlet). The counterclockwise rotation is a single round hole. Accurately) Rotate clockwise to open all the oil inlet holes a little, and then continue to rotate to close all the oil inlets until the limit is reached.
The value is very good, but as a top-end structure atomizer with 5ML, it is estimated that only QP can be compared, and a heavy box such as X217 or 26650 box will look better.
Because of the large diameter of the oil hole, there will be no case where the CPTF is filled with oil and it will overflow if it has not been injected.
As for the taste, the personal feeling is because of the single shot and the honeycomb at the bottom of the atomization chamber has a certain length of the inlet, so the air smoke is well mixed and will not be very empty. The amount of smoke is quite large, I try Opened to 100W, the voltage is 4.05, you can really do the second suction and pump 10 even if you don't paste it. (There is no test, the double hair is an oil tiger, the silk has to cherish every mouth and suck it slowly.) But not as hot as Petrie and the captain. Currently, I am trying the first warehouse berry chef, very rich and delicate, sweet and heavy, and the sweetness of the berries is like a fresh fruit. The subsequent taste also requires trying more oil.
High face value, large oil tank, oil can be turned off, the air flow structure on the bottom side of the top air intake, and a good taste experience make me feel that although the volume is sacrificed, it is a very good nebulizer with design features.
For the first time, I shared my unboxing and usage experience, hoping to help friends who are interested in this atomizer.
Quoted from @haonanyishenbiao
