Rigmod Hotcig Squonk RSQ 80W Box Mod

[Jumpin' In...]

Just wondering if anyone knows anything about this mod:

Rigmod Hotcig Squonk RSQ 80W Box Mod - Hotcig I Vape Hardware I Breazy.com

I’m new to squonking and want to stay with TC/TP capable mods, so this - along with the Fuchai Squonk 213 - caught my eye. I’ve only had an Inbox for a couple of weeks, but I’m liking it.

 

[puffon]

Just got mine in from VaperDNA.
Good price at Breezy. Mine was $64 after BF sale.
First impression only, haven't used it yet, other than turn it on.
I like it, nice build quality. Very small for a single battery reg. squonker.
My first Hotcig board, so not sure how long it will last.
The board is supposed to be water proof.
All the silicone bottles I have fit. YFTK, Athena, and the larger Pulse bottles.
The box is a little "brand" heavy, but blends in with the silver model.
Not sure why I need to light up my squonk bottle, but you can turn that feature off.
DJLsb Vapes did a water test on the R200 board.
Don't think I'd put it under water like he did tho.

 

[b.m.]

I hadn't seen this one yet,now i'll have to add it to my want list too haha.

 

[Heartsdelight]

I hadn't seen this one yet,now i'll have to add it to my want list too haha.

Me too

 

[Heartsdelight]

It’s not in stock yet at @breazy

 

[stephenwhat]

vapordna has them in stock!

 

[Heartsdelight]

VaporDNA has them in stock!

Thanks but the list price is $79.99 versus $51.99.

 

[2GLR]

This a great little mod. A bit of a hand warmer at 80 watts. About the size of a pulse, and spot on temperature control as well. This is my new favorite mod.

Only con is no battery strap. Trying to pop the battery out by slapping on my hand resulted in a paint chip from where it hit my wedding ring. I now use the battery door to pry out the battery.

Now I am probably going to buy 1 more, and glue a battery strap in them.

 

[Heartsdelight]

This a great little mod. A bit of a hand warmer at 80 watts. About the size of a pulse, and spot on temperature control as well. This is my new favorite mod.

Only con is no battery strap. Trying to pop the battery out by slapping on my hand resulted in a paint chip from where it hit my wedding ring. I now use the battery door to pry out the battery.

Now I am probably going to buy 1 more, and glue a battery strap in them.

Where did you get yours? It’s not in stock @breazy

 

[Heartsdelight]

This a great little mod. A bit of a hand warmer at 80 watts. About the size of a pulse, and spot on temperature control as well. This is my new favorite mod.

Only con is no battery strap. Trying to pop the battery out by slapping on my hand resulted in a paint chip from where it hit my wedding ring. I now use the battery door to pry out the battery.

Now I am probably going to buy 1 more, and glue a battery strap in them.

You can get ribbon from a craft store & Just place in Battery tray, put battery in & fold the excess ribbon over the battery.

 

[Steamer861]

For $ 51.99, I mite give it a try For 79.99 I would buy a SVA Clone! The SVA clone is tiny, it has copper battery contacts & a DNA75!
The RSQ has been in stock for weeks @ RSQ 80w SQUONKER MOD BY HOTCIG & AMP (SMALLEST REGULATED SQUONKER IN THE MARKET) $90.00 Canadian Dollars = 71.09 USD

 

[2GLR]

Where did you get yours? It’s not in stock @breazy

VaporDNA

 

[Vaporino]

Nice box indeed.
But how to adjust the value for XX(TCR) in temperature mode?
Anyone knows?

 

[Don29palms]

 

[Don29palms]

Nice box indeed.
But how to adjust the value for XX(TCR) in temperature mode?
Anyone knows?

Have to use the computer I believe.

 

[puffon]

If you are doing the update firmware, take note Dean's video has a link to an older update.
The most recent Dec 1 updater .dfu file is here:
SUPPORT-HOT TECHNOLOGY
I haven't done the update yet, but will follow these instructions:
http://www.hot-vapor.com/upload/file/20161107/20161107130355145514.pdf

The only glitch I'm seeing is the lights re-set after changing batteries.

 

[puffon]

If you are doing the update firmware, take note Dean's video has a link to an older update.
The most recent Dec 1 updater .dfu file is here:
SUPPORT-HOT TECHNOLOGY
I haven't done the update yet, but will follow these instructions:
http://www.hot-vapor.com/upload/file/20161107/20161107130355145514.pdf

The only glitch I'm seeing is the lights re-set after changing batteries.

OK did the firmware up date, using the latest .dfu file in my link.
First download the HM chip software.
This download is a .rar file. It's a zip file that for some reason, I didn't have the correct app to un-zip it. (Win 7)
Had to download a freeware called 7-zip to open it. (you may or may not, have to do this)
Download the R Series. RSQ-updater .dfu file
Follow the instructions in the PDF.
When I first plugged it in to my computer it installed the drivers needed.
It did fix the lights not remembering the setting, after replacing the battery, but don't see any other changes yet.

 

[puffon]

Nice box indeed.
But how to adjust the value for XX(TCR) in temperature mode?
Anyone knows?

I don't use TC anymore, but it did look like that can be done within the HM chip software.

 

[Vaporino]

Thank you puffon, will try it later.

 

[Nick N]

In stock @ Breazy. $51.99 shipped! Ordered the black one.