Rincoe Mechman Nano 90W RDA KIT

[Frenkyou]

The Rincoe Mechman Nano rda kit was sent to me for review by sourcemore, thank you.

The Mechman Nano RDA kit consists of the Manto Mini Mod and the Metis RDA. The construction material (PC) makes the device stable and shockproof.

The Kit is extremely portable size with ergonomic design, the overall good feeling in hand, the size and light weight provide good comfort.

The Mod is powered by a 18650 battery, the security department has all the necessary protections, it works in By-pass mode making it powerful, easy and immediate to use.
There are no protrusions with atomizers up to 25mm in diameter.

Metis RDA adopts a Drip tip 810, has a simple deck, easy to regenerate, with a very wide and deep tank / liquid.
A pin for the botton feeder is missing from the accessory bag.

Enjoy the reading:

The package shows on the front the emblem and the name of the Brand, the writing "Mechman Nano 90W RDA Kit", the color is indicated by an adhesive circle.

On the back there is the content, warnings, scratch & check, a bar code and the inevitable logos & brands.
Other logos & brands and social icons are shown on the side.

Package contents:
● 1 × Manto Mini Mod
● 1 × Metis RDA 24mm
● 1 × Accessory Bag
● 1 × USB cable for charging
● 2 × User Manual
● 1 × Warranty Card
● 1 × Quality Certificate

Specifications:
Rincoe Mechman Nano RDA Vape Kit Parameters:
Mod construction material: PC + synthetic leather (pleather)
Output power 1-90W
Dimensions mod 30x41.4x82.4 mm
Weight: 82g
Single 18650 battery (not included)
Delivery method: Bypass
PCB efficiency: 95%
Resistance range supported 0.08-5.0ohm
USB port: 5V / 1A
Max Output Current: 40A
Max Output Voltage: 4.2V
Drip Tip: 810
Metis RDA diameter: 24mm
Metis RDA material of construction: SUS304 + aluminum
Metis RDA insulation material: PEEK

Available colours:
Indonesia Flag, Black, Philippine Flag, Malaysia Flag, Camo.

Mechman Nano 90W:

The design of these mods echoes that of the big sister mechman lite that I just reviewed, but with a much smaller form factor, really comfortable to carry.

The side panels with their conformation offer a lot of grip, under this structure made of crosses and crossbars you can see the flag of the Philippines (my sample), made of imitation leather.

The texture of the other panel is made up of a myriad of dots that make its surface rough and pleasant to the touch.

The rear side has a graphic pattern composed of many "V" in relief, it almost looks like the design of a tread, this also helps to offer a solid grip.

In the front part, perfectly integrated with the connecting curve, we find a rather unusual activation button, in fact more than a button it is a plastic switch, very well clickable and precise, it does not miss a beat.

The "X" shaped LED is placed under the Fire button and above the USB socket, it has the task of signaling the battery charge level or any malfunctions.

 

[Frenkyou]

The cup is fixed with 2 classic torx screws, is in a perfectly central position, has a gold-plated floating pin and is slightly recessed with respect to the curves that connect the upper part to the side panels. It can accommodate atomizers up to 25mm in diameter without overflowing.

The bottom of the mod houses six generous vent slots for the batteries, carries the C E mark and the disposal logo.

The battery compartment is equipped with a convenient strap, houses a 18650 cell, the door has two good magnets and thanks to the profile of the raised edges of the body the play is minimal, almost non-existent.

Metis RDA:

The Metis is a classic 24mm RDA consisting basically of four pieces and made mostly of stainless steel.

The deck to its 5mm depth has a good capacity, the two turrets allow regeneration in dual coils, are equipped with slotted screws placed on the top, the turret for the positive pole is removable and is insulated at the base by material in PEEK.

The Top Cap rotates inside the outer sleeve and can fully adjust two large airflow slots (10X3mm).
The external sleeve has no closing stop, it freewheels on the Deck, this allows very personal angular adjustments of the air flow towards the coils.

On the bottom of the Metis RDA we find the C E mark, the disposal logo, the writing Designed by Rincoe, the cross screw to disassemble the positive turret and a medium protruding gold-plated pin.

For the regeneration I used a 24ga Kanthal A1 on a 3mm tip, for a final resistance of 0.31Ω.
To give the coils the right amount of air and to increase the aromatic quality, I set them high enough, making sure that the flow hits them from below.

Ultimately the Metis RDA has proved to be a simple and rational atomizer, it works well and is very easy to regenerate.
Rincoe has included it on several of his starter kits, I liked it and since it costs very little, I recommend taking it as a kit with the mod.

How Mechman Nano 90W Works:
Nothing simpler! Just place your RDA or RTA atomizer and the By-pass delivery (the only one available) will automatically adjust the power suitable for the vape.
The maximum thrust with full battery is declared to be 90W, what I could see during the test was that at 50-60W it works and pushes as well as on electronic mods. I did not go further.
The quality of the supply is directly related to the discharge of the battery, however the decrease is very progressive and almost unnoticeable.
Using a 16w MTL atomizer, such as the kizouku limit RTA, the vape autonomy is truly remarkable.

Lights and Notifications:

To switch the mod on and off, you need to make five clicks, the LED flashes three times.
When no atomizer is connected or the resistance is out of range, the led flashes three times.
When the resistance has a value lower than 0.008Ω the led flashes red three times and signals the short circuit.
When the 18650 cell has a residual charge higher than 30%, the led is white.
When the 18650 cell has a residual charge of less than 30%, the led is red.
When the PCB temperature exceeds 60 ° C the led flashes red five times.
During charging (USB) up to 70% the LED flashes red.
During recharging (USB) above 70% the LED flashes white.
When charging is complete, the white light remains steady.

Multiple protections Mechman Nano 90W:
10s Cut-Off Protection, Overheat Protection, Short Circuit Protection, Low Voltage Protection, Battery Reverse Protection, Overcharge Protection.

Product Highlights:

Pros:
Attractive design
Firm and comfortable grip
Incredibly low weight
Small size
Reliability of the Chipset
Good battery management
Safety equipment
Super Affordable Price (around $ 15)

Tips:
The BF pin is not include

Rincoe Mechman Nano 90W RDA Kit Sourcemore $ 15.35 Coupon code MECHNA:
Rincoe Mechman Nano RDA Kit 90W Single 18650 Box Mod with Φ24mm Metis RDA