Does anyone find the berserker 1.5 super thirsty, or is it because I “modified” it?
- Status
You could with a bit made for metal. I’m lazy, and have a whole shop full of tools in the back, so I try the easy route first. A drill bit you could rock side to side to open it up a little more. That’s what I did on the ring/af hole. It was overall easier than I thought. I went to the third bit after the second wasn’t open enough. You can take more off, but you can’t put it back on. After drilling, be sure and use a metal file to smooth out the top of the deck hole. (Spoiler alert, if you don’t, it shorts out). Then, a long ultrasonic bath, deck down to make sure all the filings are gone.BTW what did ya use? I take it my cordless drill isn't going to be enough?
Yes all top fill apart from Dvarw but still very easy,
All have some excellent clones out, of them too
for around 20 USD,
YFTK /Coppervape/ sxk version and ulton are best quality cloners,
apart from expromiser v3 as it wasnt a high priced rta so no clone out,
All are great Flavour atties,
Sent from my ONEPLUS A3003 using Tapatalk
Im awaiting 3 orders from fasttech, i get a clone enjoy it then buy authentic,
Awaiting these
Evl reaper Atto and bits,
All Atomiser i mentioned earlier i had as clones then bought authentic so want to know if reaper 3 and by ka v8 will be good enough, love v7 , so v8 being 22mm should be better Flavour,
Sent from my ONEPLUS A3003 using Tapatalk
I have 3 more ft orders incoming atm. Now that I know there is a glass options for the dvarw dl that will be my next clone tester. Been eyeballing the reaper v3 clone as well. I've finally gotten smart and clumping my ft orders according to when the items will ship. Less frustrating that way and fewer tickets generated.
Yeah thats what i did go through what i want
throw all in cart check dates ,
jot down the ones (sku) that are later dates
remove them from list
And order whats in stock.
Then I do another order, then at least you have some incoming whilst others restocking
also shipping choose quicker option pay extra dollar or 2 express e-pkt what every your region that helps too,
Things like tips and other small bits are not urgent
So no need to wait on them if not in stock delays order unnecessary ,
I do also order from several places too,
Like 2fdeal although they dont list dates and items in stock ask them before ordering,
they seem to carry most ulton goods others dont
Shenray has gone down hill ulton much better quality
and they are as good as SXK ect
have a look l search ( Ulton) on 2f deal see what they make clones of theres a lot inc new kayfun lite with all new steam tuner caps extras that others dont have yet some still pre order
nearly every high end popular atty they have cloned ,
they sell out fast for certain attys though popular in Certain groups Germans ect , clones of Corona v8, Taifun GTv4 steam tuners tank kits for them,
like every clone maker
You can get odd one thats not 100% but some also fix problems that authentic version had
biggest complaint of 2f deal is they dont list stock and available times ,
So people order then mosn about slow Shipping when they are pre order so no one has them
but you can ask on FB page.
3f vapes usually quite good too,
there are a few new ones im seeing new names of clone makers coming along Vapeasy ect
not sure on quality of them yet,
but cloning Stratum mods they look nice
but not sure until they release,
But got some great quality Atomiser and mods in past and
when i can afford if i liked them I do buy the authentic
unless its rare fb groups with 100 hoops to jump through then bugger buying the authentic, as they get priced scalped from 90$ Rrp too-300$+ because there hard to get hold of,
Sent from my ONEPLUS A3003 using Tapatalk
I'm lucky I guess...I have enough gear I seldom get impatient waiting anymore. If it's something that I want badly I order from the US vendors.
Same here got plenty ,
An sometimes usually 2 of each 1 a being clone ,
vape nice authentic one at home
Then i carry cheaper one out an about [emoji23] stops me panicking about dropping them, just got some extras for my Cloudone today,
Now one blasted half tank one SS brushed, so can at least match with a ss tube mod [emoji6]
Sent from my ONEPLUS A3003 using Tapatalk
An sometimes usually 2 of each 1 a being clone ,
vape nice authentic one at home
Then i carry cheaper one out an about [emoji23] stops me panicking about dropping them, just got some extras for my Cloudone today,
Now one blasted half tank one SS brushed, so can at least match with a ss tube mod [emoji6]
Sent from my ONEPLUS A3003 using Tapatalk
I have officially found the downside to the Fresia. I am clumbsy, yes... but I don’t normally break tank glass (backed up by the box full of ten years of spare glass from tanks past). I broke both bubble tanks this week!! One nude, the second with a vape band . First one fell out of my pocket while I was crouched unloading the dryer (onto carpet, but I’ll take the blame). Second has me mystified... with a band, imploded in my pocket while in the recliner watching tv. Ordered a bunch of replacements from China, but if they all go like this, I’ll stick with lesser ml and straight glass
. First one fell out of my pocket while I was crouched unloading the dryer (onto carpet, but I’ll take the blame). Second has me mystified... with a band, imploded in my pocket while in the recliner watching tv. Ordered a bunch of replacements from China, but if they all go like this, I’ll stick with lesser ml and straight glass
Been thinking of trying the Fresia.
Where did you find replacement glass?
Couldn't find them on FT.
I have officially found the downside to the Fresia. I am clumbsy, yes... but I don’t normally break tank glass (backed up by the box full of ten years of spare glass from tanks past). I broke both bubble tanks this week!! One nude, the second with a vape band
Oh no! So sorry, Mel...
Cloudone atto makes for a nice Flavour atty pocket carry, my new parts added to v4 deck ,
Sent from my ONEPLUS A3003 using Tapatalk
Sent from my ONEPLUS A3003 using Tapatalk
I have officially found the downside to the Fresia. I am clumbsy, yes... but I don’t normally break tank glass (backed up by the box full of ten years of spare glass from tanks past). I broke both bubble tanks this week!! One nude, the second with a vape band
That sucks monkey balls
I'm so used to the doggy that glass tanks already make me anxious. I'll be finding all my vape bands for the fresia or maybe bubble wrap the sucker
That’s why I have high hopes for the Hastur. It’s somewhere between China and here currentlyNice, but another 2-ml tank? Grrr... I hate TPD.
They just got the Fresia in. They will probably stock parts later, if they sell well.
- Status
Similar threads
