• Need help from former MFS (MyFreedomSmokes) customers

    Has any found a supplier or company that has tobacco e-juice like or very similar to MFS Turbosmog, Tall Paul, or Red Luck?

    View thread

S.S. Vape Pre-Order Hana Modz V3

Status
Not open for further replies.

wowoboi

Senior Member
ECF Veteran
Verified Member
Dec 6, 2012
113
61
GS
From what I see if you have all the wires trimmed ready in place, soldering one hana requires only AT MOST 15mins, glue and packing up takes about 15 mins. So by right, one mod takes about roughly 30 mins, you can only accomplish most to most 30 mods/day. Also, those who ordered black/gm/silver will most probably be delayed, my package came in blue(#25) and gm(#189)
On the side note, my built both tfgt/kfl mcoil is 1.2ohms(6wraps 1.6mm) and 1.7(8wraps 3mm), I would say the higher ohms you go, the battery life seems longer at the same wattage 13-15. BUT you can vape 20 watts without burning your tongue if you use a bigger coil compare to the 1.2(HOT VAPE AT 18). Applies to silica rba kfl/r91/tfgt.
*1200mah can last you about 4/4.5ml of juice at 13-15 watts.
 
Last edited:

Bgolden84

Senior Member
ECF Veteran
Verified Member
Nov 22, 2013
98
77
Macon County NC
Here is an email from hana
First part is my email to them second is the response I received


I'm sure you have had you're fill of angry folks contact you in regards to the SsVape pre-order. I'm not going to be rude or mean. I'm just hoping to get an idea of what is going on. The communication with SsVape is less than stellar and vague at best. I'd rather pay you directly for your work and a chance to own a mod. I understand your only one person but I was hoping to get an estimate on delivery to SsVape or the chance to buy a mod outright. I've been more than understand but I don't enjoy the fact that a company is holding $250 of my money and will not communicate the status of my order with me. Thanks in advance




Hi William,


We will be shipping a partial order to them this week, so pre-orders will ship next week sometimes.. We will also be sending them units throughout April and beyond.

.

Because of the delayed release and delays the Evolv is having with DNA30 boards, that has delayed our dealers in having more of our units readily available.

.

It may be a few weeks before we catch up from the delays we are experiencing from Evolv.

.

We apologize for any inconvenience this has had on our dealers and consumers of our products.

.

Thank you,

.

Julie







Sent from my HTC6500LVW using Tapatalk
 

iacchus

Super Member
ECF Veteran
Verified Member
Nov 7, 2013
361
315
Gulf Coast - USA
Here is an email from hana

Hi William,
We will be shipping a partial order to them this week, so pre-orders will ship next week sometimes.. We will also be sending them units throughout April and beyond.
Because of the delayed release and delays the Evolv is having with DNA30 boards, that has delayed our dealers in having more of our units readily available.
It may be a few weeks before we catch up from the delays we are experiencing from Evolv.
We apologize for any inconvenience this has had on our dealers and consumers of our products.
Thank you,
Julie

That seems to be their canned response to the question.
 

Bgolden84

Senior Member
ECF Veteran
Verified Member
Nov 22, 2013
98
77
Macon County NC
gyvanyze.jpg


Sent from my HTC6500LVW using Tapatalk
 

iacchus

Super Member
ECF Veteran
Verified Member
Nov 7, 2013
361
315
Gulf Coast - USA
gyvanyze.jpg


Sent from my HTC6500LVW using Tapatalk

First time I have seen that officially stated. Thanks! I haven't opened Twitter in a fortnight or so.

Has anybody who ordered gone past the eight week mark? I'm around five weeks now. I am hoping to be at least halfway there...
 

Krizzell

Super Member
ECF Veteran
Aug 20, 2013
436
126
Las Vegas
Yes but all his machining and such is done in house. I'm pretty sure hana is ordering the housings already colored and machined. He's just doing the electronics and then boxing and shipping. So he should be able to stay in pace. I read somewhere that he also had some help in putting the mods together and getting them shipped. We all know that no one is shipping eight now. Evolv could be to blame. But the lack of communication to the customers who have already paid is unacceptable IMHO. I don't mind waiting I'd just like to stay up to date as to what is going on. After all they have $250 of my money and I have hope lol. But alas we will eventually get what we paid for just with horrible customer service. I bet a lot of folks are canceling orders everyday. People just aren't patient enough lol. I have been stalking a lot of DNA mod sights and they are all out of stock

Sent from my HTC6500LVW using Tapatalk

The DNA 30 chips were finished in Jan. and started shipping that month. Even Zen a more involved mod had to make adjustments for the chip itself to fit I wonder if Hana had to do the same. Where did the 150-250 a week # come from I don't think evolv can deliver that many chips to all manufactures a week .I heard Zen's order was 1000 and I would bet his is the largest order because it is modified. Came across another site that sells the Hana and they stopped orders until they fill the ones they have. If SS vape can ship the orders up to March that would be a miracle !! I can hope...
 

bce22

Super Member
ECF Veteran
Verified Member
Feb 1, 2014
966
787
Blackstone, MA
Just got a new brew done..it's a IPA! Who wants a beer while we wait....well maybe a few kegs b4 feb orders are shipped

I brewed last Saturday for the first time in a year. I usually brew all grain but this time I threw together a couple of extract batches. Something that would be ready to drink quickly. An Irish Red and an E.S.B.

Enjoy the IPA. Send me a bottle ;)
 

iacchus

Super Member
ECF Veteran
Verified Member
Nov 7, 2013
361
315
Gulf Coast - USA
Where the hell is this STATEMENT!!!?????. Its after 5 So whatever they are releasing must not be good.

Someone who spoke on the phone with Brigid earlier said it would be sometime this evening or in the morning. It sounds to me like they are waiting on some information from Hana.
 

dydst

Full Member
Verified Member
Aug 11, 2012
66
7
philadelphia
The DNA 30 chips were finished in Jan. and started shipping that month. Even Zen a more involved mod had to make adjustments for the chip itself to fit I wonder if Hana had to do the same. Where did the 150-250 a week # come from I don't think evolv can deliver that many chips to all manufactures a week .I heard Zen's order was 1000 and I would bet his is the largest order because it is modified. Came across another site that sells the Hana and they stopped orders until they fill the ones they have. If SS vape can ship the orders up to March that would be a miracle !! I can hope...

That was me; I pulled the 150-250 number out of my .... I didn't even think of the fact that there's no way Evolv can deliver that many boards. So what are you thinking -- like 40-50 a week? Actually, that seems to be about the amount Hana is shipping: each week it looks like one retailer gets about 40-50. Wow, if that's all he can produce, SS Vapes is fucced . . .
 

xcrazydx

Super Member
ECF Veteran
Verified Member
Feb 1, 2014
757
1,292
United States
That was me; I pulled the 150-250 number out of my .... I didn't even think of the fact that there's no way Evolv can deliver that many boards. So what are you thinking -- like 40-50 a week? Actually, that seems to be about the amount Hana is shipping: each week it looks like one retailer gets about 40-50. Wow, if that's all he can produce, SS Vapes is fucced . . .

They're not capable of putting out 50 a week

Sent from my HTC One using Tapatalk
 
Status
Not open for further replies.

Users who are viewing this thread