Shinyitis Support Group

[DancingHeretik]

Morning all.

@NolaMel
If you buy your nic separate you can leave it out of recipes you are unsure if you will like.
Nic is the most expensive ingredient generally speaking.
When you make small test batches you can leave out the nic. If it's good add it or add it to a bigger batch you know you like.
I did this when I started out before I started my stockpile so I could save a little $.

Is nic the most expensive part? Or is flavoring? I guess it depends on how much nic and how much flavoring you use.

I find that flavoring is very different depending on how much nic you use. To me anyway, flavor never seems to fully develop without nic. I tried 0 nic and hated it. Not because of the lack of nic, but because of the flavor!

 

[untar]

Flavoring will be the most expensive part, especially the watered down 15%-20% mix that's commonly sold.

 

[stols001]

I'd say you could give it a shot. I vape my berserker in 2 ml (though I own the fat one) and have zero problems refilling. I just liked the vape better in that configuration, but I topfill with it wide open and have no issues whatsoever.

I'd say I'm still kind of a newb when it comes to RTAs, I think I just got lucky. I can't topfill in the 4.5 ml configuration, though, that winds up a mess. But, it's such an unthirsty tank, I don't mind it being fat and short. Refills are a breeze, even if I'm doing it more often.

Also... rayon, as I love to mention anytime I talk about a tank. LOL.

Anna

 

[Sickbxy]

Morning Everyone. I slept until 8 a.m. today.
Very late for this clown.

Oops, slept through my alarm... Txt msged my noon session saying I was going to be late... Apparently, forgot to update the calendar that we were not meeting today.

 

[Sickbxy]

Is nic the most expensive part? Or is flavoring? I guess it depends on how much nic and how much flavoring you use.

I find that flavoring is very different depending on how much nic you use. To me anyway, flavor never seems to fully develop without nic. I tried 0 nic and hated it. Not because of the lack of nic, but because of the flavor!

How do nic salts play into the profile versus free base nic flavor development? Are you looking for the hit?

 

[Sickbxy]

Looks like a radio to me and very top heavy. Not my cup of tea, and Sig quality has not fully recovered. Have heard it's getting better tho.

I am glad that I am not the only one that is unimpressed.

 

[TrollDragon]

Yep the berserker, in any size, has the classic (or now maybe say antique) properties of top fill no JFC or pressure relief tanks.
Perfect wicking, screwing tight upside down or outright bottom filling can eliminate that. It's not a tank for build noobs that's for sure.

Thanks!
I have to remove the tank from the Rose V2 to fill anyway, so I am not opposed to that method. I just can't stand the Kayfun remove the screw bottom fill, which is why I haven't put any KFL's back into service.

I'd say you could give it a shot. I vape my berserker in 2 ml (though I own the fat one) and have zero problems refilling. I just liked the vape better in that configuration, but I topfill with it wide open and have no issues whatsoever.

I'd say I'm still kind of a newb when it comes to RTAs, I think I just got lucky. I can't topfill in the 4.5 ml configuration, though, that winds up a mess. But, it's such an unthirsty tank, I don't mind it being fat and short. Refills are a breeze, even if I'm doing it more often.

Also... rayon, as I love to mention anytime I talk about a tank. LOL.

Anna

Thanks!
This will be the Mini as the regular one overhangs the MiniVolt, so it will be a 2ml journey.

Yes, Rayon is the only wick of choice. I think I'll toss one of those tanks in the cart next time I'm on FT or 3F.

 

[tgs3]

I told myself that I would buy no more hardware, other than coils, until the fall. Then I saw this: Zenith Tank - Innokin. Oh, well.

 

[jdy]

Thanks!
I have to remove the tank from the Rose V2 to fill anyway, so I am not opposed to that method. I just can't stand the Kayfun remove the screw bottom fill, which is why I haven't put any KFL's back into service.


Thanks!
This will be the Mini as the regular one overhangs the MiniVolt, so it will be a 2ml journey.

Yes, Rayon is the only wick of choice. I think I'll toss one of those tanks in the cart next time I'm on FT or 3F.

HI!! I've been looking for Rayon to give it a try and this is the only type I can find is this what your using?

 

[stols001]

MNVm

 

[stols001]

@jdy that is what I use and what most folks use from what I can gather. It works great and it's all "pre-straightened" and well manufactured. I would get that.

Anna

 

[BoogaWu]

 

[jfcooley]

That moment when you find something you want to buy but have run out of budget...

 

[jdy]

@jdy that is what I use and what most folks use from what I can gather. It works great and it's all "pre-straightened" and well manufactured. I would get that.

Anna

Thanks Anna, I wasn't sure, in the product description it's used for almost everything! I'll give it a try.

 

[BoogaWu]

That moment when you find something you want to buy but have run out of budget...

What did ya find?

 

[stols001]

Just don't get a perm. I hear it can be used for that?? Too??

I blanket advise not to get a perm. I got one when I was about 15. Regretted it so much, that I was bald for a while. That's my solution to bad hair outcomes, I just shaved it off. Like the time I dyed it black and it was horrific... Out came the shavers. LOL, my first boyfriend broke up with me over it! Lucky escape (for me) if you ask me! I look like a gypsy princess bald, LOL.

No offense to any who perm. I would imagine if it's a good perm, it looks so good I wouldn't even know it was a perm.

Anna

 

[jfcooley]

What did ya find?

Cheap authentic entheon. Already sold.

 

[JamesDMad]

If it's any consolation, tg3, it's a great tank. Solid, well built, and nice design. The topfill is great. The coils last FOREVER and I do mean that. I must've had mine going for at least a month now and I even tried to kill my first coil with storebought juice. The 1.6 coil has an 8 ml "break in" period, the 0.8 is supposed to be a flavor monster out of the gate. I haven't tried it yet as 1) still on my first coil and 2) for my current juice, anyway, it is exceptionally cloudy. I can't figure out how that works, either, as despite much cloudiness, it's also not a "thirsty" tank. I can't say that it's super innovative or necessarily totally innovative, but it IS a nice, reliable MTL tank that has a lot going for it. I am saving my 0.8 coil for when I start using my mixes with PEG400 as it's so cloudy LOL.

I don't think you will be disappointed though.

And oh my, the husband woke up in a foul mood (late) and got all up in my grill about nothing, literally nothing it was, "Why are you looking at me that way??"
"I am looking at you because I am talking to you."
Etc. Etc. This led me to clean the kitchen to work off some annoyance but then he went back to bed, LOL. This means no doggystyle for me today, apparently he now wants to sleep for 24 hours, but I'm not going into my vape closet to retrieve it. No thanks.

He's never going to get on a normal sleep schedule like THIS. But, since I've already completed some labors for the day, I'm just going to play around and do whatever until it's yoga time, which most definitely must happen today.

We did have fun with the kid and his dog last night though....

Anna

She said doggy style LOL

 

[stols001]

NVm

 

[whodat2112]

I have several 20700 batteries and was looking for a reasonably priced dual 20700 regulated mod, but the few that I have found don't get very good reviews.

Oh, and not a squonker (I know, that's blasphemous to some )