Sigelei shows 9.9 ohm and won't fire

[look30]

So I received my new sigelei V3 and it works AMAZING. Really happy with the purchase , my only rant is weight but it's SS so what the heck..

My only porblem to date is that one of my Atty's shows 9.9 w when I attach it to the sigelei and APV won't fire.
I tried the same aty , a Kanger T2 , and works just fine on the Spinner at 4 v.

Any ideea on what's going on ? Is this Atty killing my battery ?

 

[BostonVape]

so 9.9 means its not reading ANY ohms from the atty..
the 9.9 reading doesn't have anything to do with your battery so shouldn't worry about that aspect

can you try it on another device to see if it works ok?

also what type of atty are you using? and how many ohms?

 

[Vapoor eyes er]

I have also heard of this issue. Clean all threads to make sure it has a good electrical connection. Dirty threads equals poor connection and can happen with all Tube Mods. SS seems to be more susceptible to this issue.

 

[bzmotoninja83]

Another thing it could be is that the center pin isnt making contact. I have a Smok Zmax that did the same thing, I fiddled with the center, raising it slightly with a blunt tip syringe and now I have contact.

 

[piggy]

I had the same isuue with a boge cartomizer. I got the 9.9 reading on 2 different vamos and it wouldn't work on my smoktech 5v mod either. I believe it is a dead atty. suppliers usually let you return doa's though.

 

[look30]

I have also heard of this issue. Clean all threads to make sure it has a good electrical connection. Dirty threads equals poor connection and can happen with all Tube Mods. SS seems to be more susceptible to this issue.

Thanks everybody , I cleaned the atty bottom really well and now shows 1.6.

Damn' ignorance is bliss , I taught that all T2's I bought where 2.4 but turn out they're 1.7 ish.

 

[Vapoor eyes er]

Thanks everybody , I cleaned the atty bottom really well and now shows 1.6.

Damn' ignorance is bliss , I taught that all T2's I bought where 2.4 but turn out they're 1.7 ish.

Good one I have some 1.7 cartos that measure out at 2.2 ohms and a 1.8 head that measures out at 1.5 ohms
As for my SS Vamo I use NOALOX on the threads. Actually use it on all my Mods.