SilverBullet: Would You Recommend?

Would you recommend the SilverBullet?

  • Yes

  • No


Results are only viewable after voting.
Status
Not open for further replies.

cddz

Supplier's Manufacturer - Offline
ECF Veteran
May 14, 2009
1,761
97
Newark, Ohio
Here is a pic of mine after 2 months of hard use, and a bad buff lol. Forgive the quality my camera is out on loan, had to use cell phone.:p
cddz-albums-bs-picture2498-switch.jpg
 

cddz

Supplier's Manufacturer - Offline
ECF Veteran
May 14, 2009
1,761
97
Newark, Ohio
yeah..my phone cam won't show it...I'll have bring something from work or take the photo at work. I'm happy to hear nobody else has it. I should bottle my sweat and sell it as tarnish remover!!!! :D, maybe my sweat will clean atty carbon!!!! not :nah:
LOL, have you tried buffing it off? Let us know what we can do to make it right.
As far as the poll, I know who it was. Debating if i should PM them and ask why
 

sattec

Super Member
ECF Veteran
Jul 4, 2009
673
28
mcallen texas
no, it's cool with me...I'd rather wait to see if it's global...if it's not, it's a user created condition. I love this product, I was fed up with pen style batts....your batt pac really makes my atty's burn all the juice thus reducing gunk build up, it's a cleaning cycle everytime I use it almost......I'm in a fog right now, she's really cooking juice tonight! I got my good atty "Poppy" on right now, later I'll switch to "Snappy" and let Poppy rest.....
 
Last edited:

cddz

Supplier's Manufacturer - Offline
ECF Veteran
May 14, 2009
1,761
97
Newark, Ohio
no, it's cool with me...I'd rather wait to see if it's global...if it's not, it's a user created condition. I love this product, I was fed up with pen style batts....your batt pac really makes my atty's burn all the juice thus reducing gunk build up, it's a cleaning cycle everytime I use it almost......I'm in a fog right now, she's really cooking juice tonight! I got my good atty "Poppy" on right now, later I'll switch to "Snappy" and let Poppy rest.....
LOL you named them. I love it after a new atty breaks in. UPDATE after 17 hours and 2.5mL of juice my 18650 is at 3.9v, started out at 4.2v this morning!
 

cddz

Supplier's Manufacturer - Offline
ECF Veteran
May 14, 2009
1,761
97
Newark, Ohio
17 hrs ...that is incredible! the extra volts keeps everyting working right, I'm slightly afraid of 6 volts...I'm afraid it's gonna fry my atty's quicker....hell yes I named them, they're family!
Not to get too technical, standard batteries offer 4.2 at full charge as well, its the available amps that make the mass vapor. Allows the atty to operate at aproxx 6.75watts. Standard batts operate the atty at around 1.75 watts. Man I'm going to bed. Good night. And thank you again!
 

MarthaT

Moved On
Jul 23, 2009
1
0
56
  • Deleted by AngusATAT
  • Reason: spam

truelove

PV Casanova
Supporting Member
ECF Veteran
May 2, 2009
2,359
9
Bronx, NY
Well, the only thing I find - are minute scratches - but that is because I keep the PV's that I am using on any given day in a cup (standing upright with several others). The other PV's cant keep their hands off of the SB!!!!
They are always touching the SB when I am not looking!!;-);-)

:rolleyes::rolleyes:
The SB is to sexy lol.

Get a baby sock, it works for me.
 

xisox

Full Member
Aug 6, 2009
8
5
Disclaimer: I love the SB and did pre-order for the 510 version.

That said, has anyone else found that ANY of the atomizers do not screw completely into the fitting? I have not asked Rob about this yet but I have to screw the atty in and then press the button and begin to slowing unscrew it to get it to fire. I find the "sweet spot" and it's all fine but NONE of the atomizers (including the two that Rob sent with my purchase) fit when screwed all the way in.

Other than that it IS a perfect unit and I've had to lower the nic content of all of my 36 vape juices way down but before I write to Rob about it, I wanted to see if this is normal. I have searched the forums but it's mostly banter so forgive me if someone else has posted about this as I couldn't find it.

Thanks vapers!! (thanks to Rob @ Alt-Smoke too!! I still need my darn penstyle adapter wink wink).
 

sattec

Super Member
ECF Veteran
Jul 4, 2009
673
28
mcallen texas
has anyone else found that ANY of the atomizers do not screw completely into the fitting? I have not asked Rob about this yet but I have to screw the atty in and then press the button and begin to slowing unscrew it to get it to fire. I find the "sweet spot" and it's all fine but NONE of the atomizers (including the two that Rob sent with my purchase) fit when screwed all the way in.

yes, same thing exactly happened to me, I parked those atty's until I happen across a good batt for them to match with...weird wasn't it :), it was like "what the hell is happening here?" ;)
 

cddz

Supplier's Manufacturer - Offline
ECF Veteran
May 14, 2009
1,761
97
Newark, Ohio
Disclaimer: I love the SB and did pre-order for the 510 version.

That said, has anyone else found that ANY of the atomizers do not screw completely into the fitting? I have not asked Rob about this yet but I have to screw the atty in and then press the button and begin to slowing unscrew it to get it to fire. I find the "sweet spot" and it's all fine but NONE of the atomizers (including the two that Rob sent with my purchase) fit when screwed all the way in.

Other than that it IS a perfect unit and I've had to lower the nic content of all of my 36 vape juices way down but before I write to Rob about it, I wanted to see if this is normal. I have searched the forums but it's mostly banter so forgive me if someone else has posted about this as I couldn't find it.

Thanks vapers!! (thanks to Rob @ Alt-Smoke too!! I still need my darn penstyle adapter wink wink).
Is this all 510 attys? Or just a few, sorry did not quite get if that is what you ment.

yes, same thing exactly happened to me, I parked those atty's until I happen across a good batt for them to match with...weird wasn't it :), it was like "what the hell is happening here?" ;)
Is it all of your 510's or just a few?
 

cddz

Supplier's Manufacturer - Offline
ECF Veteran
May 14, 2009
1,761
97
Newark, Ohio
I looked at 'em, no noticable defects, and nothing moving around...it appears spec.....dunno......
Just so I understand, sorry not feeling well, only the two 801 atties you recived with your SB act in this manner? All other 801 atties you have are fine? With the suspect atties do you notice a full stop on the connector, do you notice a full stop with the "wierd" atties?
 

cddz

Supplier's Manufacturer - Offline
ECF Veteran
May 14, 2009
1,761
97
Newark, Ohio
there is a difference in the "stop bump"...my ruyan's bump better but the others (I'm thinking) just got tight without a bump....yes my old ones bump into place better than the weird ones, there is a difference....maybe "xisox" can confirm this for both of us....
xisox has a 510. Sounds like the suspect 801's are about .003 out of spec:nah: Thats about all it takes to squish the insulators that is used in most attyies. LOL sounds like a 5 o'clock atty eh?
 
Status
Not open for further replies.

Users who are viewing this thread