some one did mention, look like rdta aka not that pocket friendly ...Look up the Jester by Vapefly. The deck looks a lot easier to build on...this one I'm actually looking forward to.
Smoant Pasito 25W - RBA POD
- Thread starter ArminF
- Start date
- th_trl_thread_readers 0
- Status
I’m sure the Jester is okay. But for me it looks like something I would have liked in 9th grade, not now.
What makes it a "pod" rather than a proprietary battery & variable atomizer system? It doesn't seem to be the size. Lightweight..? Somewhat...at the expense of charge life?
The way the word has developed it is called a pod because it uses a pod for the juice storage. Much like we now call the battery section in a traditional device a mod, even though the original meaning of “mod” was different. Or we call the mouthpiece on our “mods” a “drip tip”. Even though few use it to drip.
That Jester seems a step in the right direction, but I think I still like the RTA style of the Pasito. Still hoping to see someone here with some first hand experience with it.
give me few more day, my is on the way with 3 rba
Nice, let us know your verdict, what do you plan on building on it? and what e-liquid do you plan to use on that build? Just curious.
Mines on the way. Maybe ten days from fast tech. This will be great if it works and is consistent. Wendy do the best review and build on that deck. But her nails kill me every. Single. Time. After giving up on these crappy pods, this will be it until why can perfect the small rba pocket mod. The build deck is definitely an issue.
some simple update about my pasito :
Juice Kilo Honey Cream 6mg freebase and 0.6 ohm occ.
Vapor production medium (nord still champion on this).
Flavor : decent, i think is better than nord.
Throat hit is decent.
I'm not MTL guy, so i just try DTL.
Size:
Thickness : 18mm same with nord
Tall : slight taller than nord or one DT taller than nord.
width : 1.5x of nord.
Build quality :
packaging is good, look like i'm doing mobile phone unboxing.
no rattling, magnet is super strong.
Btw is not that difficult to build pasito RBA (take few minute for me <5 minute), but too tired to try out flavor and vapor production yet.
will provide more info tomorrow.
extra:
RBA does come with some wires, cotton, blue tiny screwdriver, spare screw (4 unit) and some rubber/silicon seal ring.
Juice Kilo Honey Cream 6mg freebase and 0.6 ohm occ.
Vapor production medium (nord still champion on this).
Flavor : decent, i think is better than nord.
Throat hit is decent.
I'm not MTL guy, so i just try DTL.
Size:
Thickness : 18mm same with nord
Tall : slight taller than nord or one DT taller than nord.
width : 1.5x of nord.
Build quality :
packaging is good, look like i'm doing mobile phone unboxing.
no rattling, magnet is super strong.
Btw is not that difficult to build pasito RBA (take few minute for me <5 minute), but too tired to try out flavor and vapor production yet.
will provide more info tomorrow.
extra:
RBA does come with some wires, cotton, blue tiny screwdriver, spare screw (4 unit) and some rubber/silicon seal ring.
Last edited:
RBA :
RBA does come with some extra part.
Some rubber seal.
1 piece cotton
4 piece pos deck screw.
10 cm wire.
My build 28g 2mm 7 coil, 1.6 ohm, firing at 13 w n 16w (second n third light).
Pro
For me RBA not that difficult to build
high tolerant in cotton setup (over or under cotton still no leaking, no dry hit, once there is hint of dry hit, means pods empty).
good pricing.
Cons:
510 adapter design, sometime is hard to detach between coil n adapter.
little heat up on DT (chain vape).
Driptips threading is just average (not top quality threading).
battery indicator, once it reach 2 light, it means about time for you to charge not 40%, once second light off, it can't fire anymore.
it seem like no auto cut off after fully charge, so watch out.
I prefer pasito compare to Trinity alpha, Ijoy, exceed grip. (i still like my nord, i think cause of smok nord mouth piece)
Btw Pasito performance is like Artery Pal II but with RBA, constant and adjustable wattage, RBA n lower prices point, for me pasito act like mini MOD than pods but comfortable in hand n light weight.
RBA does come with some extra part.
Some rubber seal.
1 piece cotton
4 piece pos deck screw.
10 cm wire.
My build 28g 2mm 7 coil, 1.6 ohm, firing at 13 w n 16w (second n third light).
Pro
For me RBA not that difficult to build
high tolerant in cotton setup (over or under cotton still no leaking, no dry hit, once there is hint of dry hit, means pods empty).
good pricing.
Cons:
510 adapter design, sometime is hard to detach between coil n adapter.
little heat up on DT (chain vape).
Driptips threading is just average (not top quality threading).
battery indicator, once it reach 2 light, it means about time for you to charge not 40%, once second light off, it can't fire anymore.
it seem like no auto cut off after fully charge, so watch out.
I prefer pasito compare to Trinity alpha, Ijoy, exceed grip. (i still like my nord, i think cause of smok nord mouth piece)
Btw Pasito performance is like Artery Pal II but with RBA, constant and adjustable wattage, RBA n lower prices point, for me pasito act like mini MOD than pods but comfortable in hand n light weight.
Last edited:
flavor on RBA : decent ( my build 1.7 ohm, 0.7ohm n 0.8ohm)
wire : i think is just normal kanthal, can't really tell.
airflow : i try few time, wide open and close is huge different, but DTL person, so 99% closing down for me is very tight.
few extra cons i found in this device:
charging is 0.97a but it slow down to 0.7a after 80% than 0.01-0.03a charge when it complete full.
battery is a bit poor (i vape at 13-16w (2 or 3 light) setup).
Sometimes it flood after refill, try to figure out why.
Extra Pro:
With RBA i can vape any freebase juice (sweet) with not issue, but i still swap cotton after 2-3 tank fill.
my advice is buy few extra RBA, build it and use it as OCC.
Got the RBA but still waiting for the pod. Built and installed SS316l, 28g, 2.5mm, 6 wraps, 0.88 Ohm. Actually it was quite easy.
I'm glad they included the 510 adapter. So I built it on the ohm meter. Threading are fine.
If I'll be satisfied with the pod, I'll buy one or two additional RBAs as suggested by @SonnyCooL
I'm glad they included the 510 adapter. So I built it on the ohm meter. Threading are fine.
If I'll be satisfied with the pod, I'll buy one or two additional RBAs as suggested by @SonnyCooL
Last edited:
yup is not difficult at all.
btw i having flood issue when refill, now try to figure out how to solve this problem.
The pasito is in transit, got the rba section as well. it looks easy enough to build on, its very similar to my "le papillon by gus" rda its about the same size. if you are flooding maybe you just need to wick harder.
Imho pushing and "bending" the coil, its holding by orings only
- Status
