Smok Nord 2 Kit 40W

Status
Not open for further replies.

Frenkyou

Ultra Member
ECF Veteran
  • Apr 26, 2019
    1,643
    1,658
    55
    italy
    www.svapo.it
    The smok nord 2 kit 40w is the evolution of the smok nord V1.
    This new v2 version has an integrated 1500 mAh battery, adopts the 0.69-inch OLED display, the internal advanced chipset that allows you to deliver a maximum power of 40 W, its maximum charging speed now reaches 1.2A, the interface displays the percentage of battery charge and the estimated time for this operation as well as clearly showing other data during vaping. The kit includes two new cartridges (RPM and Nord), the RPM cartridge is compatible with all RPM coils, therefore also with Smok's RBA, the Nord Pod is instead compatible with all Smok Nord coils.

    Below in the image we can compare its main features with those of the V1 version.

    1.jpg


    The Smok Nord 2 kit arrives in a cardboard package with the image of the pod on the front, some main features and the wording 7-color resin nord 2 kit, on the back side the contents and warnings are indicated, finally the various logos & brands.

    2.jpg


    On the side we find the scratch and check and the holographic symbol of Smok, on the opposite side we can read the address of the manufacturer in addition to the email and their website.

    3.jpg


    Kit Contents:

    1 Nord device 2 Pod

    1 RPM cartridge (4.5ML) Mesh / coil RPM 0.4ohm (pre-installed)

    1 Nord cartridge (4,5 ML) Nord DC MTL coil 0,8ohm (pre-installed)

    1 Micro USB cable for charging

    1 User manual

    4.jpg



    North 2 Battery Features and Specifications:

    Construction material: zinc alloy
    Available colors: red, black Cobra, 7 color oil, gold, 7 color Cobra, white Cobra, 7 color resin, black stabilizing wood, red stabilizing wood
    Dimensions: 95x30.5x20 mm
    Output power range: 1-40 W
    Integrated 1500 mAh battery
    Supported resistance range: 0.3-3.0 ohm
    0.69-inch OLED display
    Input voltage: 3.3-4.2V
    Output voltage: 0.5-4.0 V.
    Standby current: <50uA
    Charging: DC5V / 1.2A
    Simple single button operation
    Micro USB port for charging
    Pod protection
    Short circuit protection
    Prolonged shooting max 8 seconds
    Low voltage protection

    Features and specifications Nord 2 cartridges:

    Construction material: PCTG
    Liquid capacity: 4.5 ml
    2 types of cartridges available: RPM / Nord
    Refill with silicone cap
    Possibility of RBA installation
    Magnetic connection between cartridge and battery

    5.jpg


    The main differences between the RPM and Nord cartridges are basically that the former (RPM) are more suitable for vaping in Flavor and host larger and better performance coils, while the latter (Nord) are more devoted to vaping MTL, MTL / Flavor .

    6.JPG


    RPM & Nord cartridges compared

    7.JPG



    Range of coils compatible with RPM and Nord cartridges:

    RPM Mesh Coil, 0.4Ω, best: 25W
    Triple RPM, 0.6Ω, best: 25W
    Quartz coil RPM, 1,2Ω, best: 12W
    Coil SC RPM, 1.0Ω, best: 14W
    RPM MTL Mesh Coil, 0.3Ω, best: 10-15W
    RPM RBA, for do-it-yourselfers
    Coil MTL RPM DC, 0.8Ω, best: 16W
    Coil Nord DC MTL, 0,8Ω, best: 16W
    Coil Nord Mesh-MTL, 0.8Ω, best: 16W
    Normal North Coil DC, 0.6Ω, best: 20 W
    Coil Nord Mesh, 0.6Ω
    Normal North Coil, 1.4Ω

    8.jpg


    The RBA della Nord v2 40W is the same that we can install on the RPM cartridges of the Fetch Mini, Fetch Pro, RPM40W and RPM80W

    9.JPG


    In the first image we see the inside of the battery with the 2 pins that will combine with the cartridge.
    The bottom of the mod shows the micro usb charging socket and the name of the Smok chip (IQ-N-CHIP)

    10.jpg
     
    • Like
    Reactions: SP013

    Frenkyou

    Ultra Member
    ECF Veteran
  • Apr 26, 2019
    1,643
    1,658
    55
    italy
    www.svapo.it
    The front side houses the Fire button (equipped with a white LED light)
    - when the battery is discharged the led flashes 15 times (Battery Low)
    - during switching off / on the LED flashes 3 times GoodBye)
    - if the resistance is lower than 0.3Ω the led flashes 4 times (Ohms to Low)
    - if the resistance is equal to or greater than 3.0Ω, the LED flashes 4 times (Ohms to High)
    - if the cartridge is not present on the battery, the LED flashes 4 times (No Atomizer)
    - if the battery is short, the led flashes 5 times (Atomizer Short)
    - if the shot exceeds 8 seconds the LED flashes 5 times (Time Over)
    -
    the opposite side reproduces the same acrylic motif

    11.jpg


    With the display off, the profile of Nord2 is identical on both sides, at the top you can see the air-flows (fixed)

    12.jpg


    How Smok Nord v2 works

    13.JPG


    Five clicks to turn the mod on / off, the 0.69 "display shows: the wattage, the Ohm of the coil, the Volts, the percentage of remaining battery charge and the number of Puff.

    To access the adjustment of the W; you need to make 3 quick clicks on the Fire button, we will immediately see the W flashing, with each subsequent click we will have an increase of 1W at a time, once we reach 40w we can go back with a single click starting from 1W, once you have found the ideal wattage you need to wait about 3s and the pod will deliver power to the number of w that we have chosen, the screen will also be automatically locked, preventing accidental changes to the previously set setting.

    14.jpg


    15.JPG


    Nord2 Safety protections

    16.JPG


    During charging, the display shows the percentage of battery progress and the time left to complete the operation.

    17.JPG


    For Nord2 in total there are 9 different color options

    18.JPG


    Final thoughts

    This new version of the North compared to dimensions (almost unchanged) is appreciated for some solutions that differentiate it from the "poor" relative v1

    In the image below the V1 (white) and V2 (red)

    19.jpg


    Smok Nord2 Pro:
    - Chip Set IQ-N
    - Battery autonomy increased
    - Charging speed increased
    - High number of RPM and Nord compatible coils
    - Possibility to mount the RBA base for regeneration on the RPM cartridge
    - Display from 0.69
    - 1-40W adjustable wattage
    - Automatic locking of the coil at the set w.
    - ease of use
    - Safety protections
    - Excellent performance in Flavor

    Smok Nord2 Cons:
    - Liquid level in the cartridge not visible during vaping

    Although I am not particularly fond of Pods, I must admit that this new Nord2 kit is comfortable and has potential if used in Flavor, it will certainly be appreciated by those who, with the RBA base (available separately) will want to dedicate themselves to regenerations, without giving up an excellent level of safety protections and a good liquid capacity of its cartridge / tank.

    I thank Smok for free sending this device: https://eu.smoktech.com/kit/nord2-kit
     
    • Like
    Reactions: SP013
    Status
    Not open for further replies.

    Users who are viewing this thread