The smok RPM160 Pod mod Kit, equipped with the brand new smok IQ-160 chipset is the latest updated version of the successful SMOK RPM series, offers the possibility of using two 18650 batteries and is offered in four different carbon fiber colors.
It comes standard with a 7.5ml pod and two 0.15ohm coils.
Among the accessories line there is an interesting regenerable RDTA Pod with a capacity of 5.5ml (available separately).
Enjoy the reading
The classic cardboard packaging shows on the front the image of the mod and some salient features, on the back and on the sides are the addresses, warnings, content, scratch and check.
Package content:
1 Mod Pod RPM160 kit
1 RPM Pod 7.5ml
2 RPM Mesh Coil 0.15Ω 40-90W
1 Micro USB charging cable
1 User manual
Parameters:
Dimensions: 125 x 45 x 28.2mm
Weight: 126gr
Battery type: dual 18650 batteries (not included)
Standby current: <200uA
Input voltage: 6.4 ~ 8.4V
Output voltage: 0.5 ~ 8.2V
Output power: 5 ~ 160 W.
Charging voltage: 5 V +/- 0.2 V.
Charging current: 1.8A (max)
Battery charger output: 5 V +/- 0.2 V / 2 A.
Resistance range: 0.1 ~ 2.5ohm
E-liquid capacity: 7.5 ml
Multiple protections:
Short circuit protection
Low battery warning protection
Overheating protection
Protection cut-off 8s
Atomizer recognition
Puff monitoring
Available colors:
How RPM 160 is made:
The rectangular zinc alloy frame is joined in every corner, the shapes on the sides have been designed for good ergonomics, the width is contained, the height seems remarkable, if we compare it to a normal two-battery mod with atomizer of equal capacity, one realizes that even in height the Smok RPM 160 is not excessive.
The front side below the pod shows one of the two opposing and non-adjustable airflow slots (2x 12mm x 3mm).
The front panel in plastic material with carbon look effect houses the services. The fire button is slightly protruding rectangular in shape, comfortable and with good tactile feedback. The 0.96 "Oled TFT screen offers good visibility and all the useful information for vaping in VW mode. The Up / down keys are part of a comfortable rocker arm. The USB port at the bottom, allows a balanced charging of the batteries.
On the back, starting from the top, we find the other air-flow slot and the carbon look panel with the writing "RPM 160" at the bottom.
The side view of the RPM 160 shows a good coupling between the panels and the frame, even at the top, we can see how the edges of the mod are well connected to the Pod.
The compartment for the pod seems well insulated, it is screwed to the frame by 4 screws, in a slightly off-center position there are the two spring-loaded and gold-plated contact pins. The magnets are raised and generously sized.
The base on which the RPM 160 rests consists of the hatch to access the battery compartment.