SMOK RPM 2S KIT 18650

[Frenkyou]

smok RPM 2S kit 80W

The smok RPM 2S 80W kit with 18650 battery follows the previous RPM2 with built-in battery and is the latest update of the successful RPM40 and RPM80 series.

The TFT screen has been increased to 1.14 ", the user interface has been renewed, the USB port is Type-C and has a charging speed of 1.4A.

The new cartridges have an incredible capacity of 7ml of liquid.

Enjoy the reading

On the front side of the package we find; the smok brand, the main features, the RPM 2S Kit device and the color information of this sample.

On the back we find the packing list, warnings, logos and brands.

On the side are reported: The manufacturer's address, the Scatch & Check, the hologram, an anti-counterfeiting code and a bar code.

Packing List:

1 - 2S RPM device
1 - Pod RPM2 (7ml)
1 - Pod RPM (7ml)
1 - 0.16Ω RPM2 Mesh Coil (25-50W)
1 - 0.4Ω Coil RPM (25W)
1 - Type C cable
1 - User manual

Parameters:
Chipset: IQ-X
Dimensions: 28.5x31x115 mm
Weight: 104g
Battery: single 18650 battery (not included)
Output: 1W-80W
Output voltage: 0.5V -4.0V
Input voltage: 3.3V- 4.2V ± 0.2V
Screen: 1.14 inch TFT
Resistance range supported: 0.15Ω-2.5Ω
Standby current: <100uA
Charging voltage: 5V ± 0.2V
Charging Current: 1.4A (max)
Overcharge Voltage: 4.3V ± 0.05V
Overdischarge Voltage: 2.4V ± 0.05V
Overcharge Current: 2A ± 0.6A
Reaction time: 0.001s
Type-C quick charge
Pass-through support
Puff counter

Six colors to choose from:
Black, Red, Prism Rainbow, Prism Gold, Prism Blue and Prism Deep Tarnish.
the Sample I received has a beautiful paint, the control keys are the same color as the frame, the pattern of the acrylic back panel varies according to the model, overall the result is sober and elegant.

How the Smok RPM 2S Kit is made:
The form factor of the RPM 2S is identical (only slightly larger) to its little sister RPM2, both closely resembling the RPM40 progenitor.
The feeling of solidity and sturdiness that you get when holding them is superior to that of other RPMs.

Starting from the top you can see the first improvement, the pod has gained a lot in liquid capacity (before it was not small) also offers a large transparent surface for total control of the level / liquid.

The zinc alloy frame houses a dark colored panel with the Smok branding embossed on the top.
Below we find the fire button with the same shape as that of the RPM40, but much larger and more comfortable to click.

The OLED display of the new 1.14 "RPM2 / RPM 2S is huge compared to that of the RPM40 and RPM80, the font is really enlarged and nice to read.
Below the screen there are the Up / Down keys which are also larger and easier to operate.

On the back, the removable acrylic panel is placed in the frame to access the battery compartment.
In the lower part of this panel we find the RPM 2S writing, the C E mark, the disposal logo and the writing "designed by Smok".

 

[Frenkyou]

In the side view of the RPM 2S we can easily see how the wide transparent perimeter of the Pod offers full visual control.
Slightly lower there are the two fixed air-flows, with measures of 3x12mm, the particular transparency of the pod allows you to view the liquid even through the Air-Flow slots.
This sample, unlike the RPM2, has an adhesive IQR-Code, near the hole to open the battery compartment door.
This hole also acts as a vent for the cell.

The opposite side bears the USB Type-C charging socket on the bottom, I prefer this convenient location of the USB over that of the RPM40 which was on the bottom of the Mod.

The pod compartment is large and spacious, in the four corners there are respectively four round-shaped magnets, in the center there are the two contact pins.
The base that supports the RPM2 bears the name of Smok's new IQ-X Chipset.

The compartment / battery is made of fireproof material, has the polarities marked, the positive pole upwards, the positive pole downwards.
To facilitate the extraction of the 18650 cell there is a comfortable Smok branded lace.

The flap closes by interlocking and is not equipped with magnets, this system avoids any movement, it seems a single piece with the mod.

POD RPM-RPM2:
There are two tanks available in the kit, both of which adopt an anatomical mouthpiece in the "duck's beak" style and both contain a huge amount of liquid (7ml).

The rubber cap of the tank is placed sideways, but we see a difference: one bears the inscription RPM2 and the other the inscription RPM, why?
Simply because the one with RPM2 writing will host a new series of Coils called RPM2, larger and more performing.
The other tank called RPM continues to house the whole series of Smok RPM-Coils available on the market.

By moving the red rubber refill cap to the side, you can access the refill hole, this hole is well sized to be used with most liquid containers on the market.

Coil:
Available in the kit for the RPM2 tank there is the new 0.16Ω Coil RPM2 Mesh with range (25-50W).
The coil chosen instead for the RPM tank of this kit is the 0.4Ω RPM-Coil (25W).

The air-flows of the RPM2 convey the air to the coil from top to bottom with a sort of "U" turn, the forced passage impacts against the pod in the initial section, and then goes down channeled along the internal walls, opening the radius of curvature in progression until reaching the Coil.
The sensation with both coils (although they are different) is that of a perfectly balanced and contrasted shot at the right point.

- 0.16Ω RPM2 Mesh Coil (25-50W) These coils have been designed by Smok to be used on the Scar P5 and P3 mods, they are low resistance Coils ideal for a more airy vape in full DL style. I had already tried them and I liked them for their excellent characteristic of performing very well even at the lowest wattage indicated on the coil (25-50W).

At 25W you can vape all day without getting tired, the delivery is ready and the steam is not too hot, of course by raising the watts the steam becomes more full-bodied and the flavor more marked, the optimal performance is at 40W,

- 0.4Ω RPM Coil (25W): This Coil is suitable for a more limited vape and a Limited-Flavor inhalation, it also offers great flexibility of use, already at 15W it is able to activate perfectly and promptly, of course its "Best" is reached at 25W.

I noticed that this 0.4Ω Coil works much better on the 2S / RPM2 RPM than the Scar P5, the Puff is smooth and clean, free of imperfections with a constant thrust and good fluffiness, on the 2S / RPM2 RPM I find it perfectly balanced between steam production and aromatic release, a coil for all day use, its longevity with the necessary precautions and with the use of the right liquids is certainly at the top of the category.

The positive note using the Smok pods is that there are no significant liquid losses, the formation of condensation at the end of the day is very minimal or even absent, the Coil si Smok are confirmed as very reliable among the best on the market.

How Smok RPM 2S works:
The 1.14 "OLED screen shows very clearly in enlarged characters all the information useful for vaping, the renewed IQ-X Chipset allows you to:
- Turn the mod on / off, by making five consecutive clicks on the Fire button in less than two seconds.
- Vaping by clicking the Fire button.
- Lock / unlock the Display by pressing the fire button three times in succession.
- Lock / unlock the wattage by simultaneously pressing the up / down keys.
- Adjust the Wattage with the Mod unlocked from 1 to 80W with an increase / decrease of 1W at a time, by clicking Up or Down.
- Delete the total number of puff's by pressing the Down / Fire buttons simultaneously, selecting Clear Puff "Yes or Not", confirming the choice by holding down the Fire button.

Note:
- With the RPM2 version it is possible by clicking together the Up key and the Fire key to detect the estimate of the remaining puffs.

Protection level:
8s cut-off
Open circuit protection
Over current protection
Overload protection
Short circuit protection
Overheating protection
Low battery warning

Final Considerations:
During the test of the Smok RPM 2 with integrated battery I found no problems, the same thing during the test of this RPM 2S, the product has many advantages, I have described them and I repeat some of them together with my advice.

My advice is this: if you are looking for an easy to use device, comfortable with a huge autonomy of 7ml, solid, robust, reliable, economical, with a very good management of the IQ-X chipset and with long-lasting and performing Coils, you can easily choose the Smok RPM2 or the RPM 2S.

Thanks to Smok for sending this Sample:
Striking a good balance in the RPM series, the RPM 2 and RPM 2S coming as a combo jointly present full-flfledged technology with excellent visual sensation.