Smok Zmax V2 Preferred settings? (using a Kanger ProTank)

Status
Not open for further replies.
I use a Protank with a 2.5 ohm coil on my Zmax at 4.0 volts and get a good vape.

I do go up to 4.3-4.6 volts for a really strong vape and as low as 3.5 volts for a mild vape.

It really depends on what juice you use as well as coil resistance and most of all personal preference.

Somewhere between 3.5 volts and 4.5 volts you should find your sweet spot.
 

SirSteve

Ultra Member
ECF Veteran
Verified Member
Dec 10, 2012
1,358
2,099
Northern Indiana
I usually start around 8 watts, but since you don't seem to having much success with watts, here is a simple rule that will get into the ballpark with volts. Add 2 to the resistance of your topper, 2.4 ohms + 2 = 4.4 starting volts, adjust from there. One thing to be aware of, some people say the Protank doesn't like high voltage.

The truth is, if you took five vapers and gave them the same setup, they would probably end up vaping at five different settings. So what works for others, may not be the answer for you. Some of us even adjust throughout the day. Just keep playing with the settings and you'll find your sweet spot, just don't be surprised if your sweet spot changes. Vape on! :vapor:
 

K_Tech

Slightly mad but harmless
ECF Veteran
Verified Member
Sep 11, 2013
4,208
5,109
Eastern Ohio, USA
The truth is, if you took five vapers and gave them the same setup, they would probably end up vaping at five different settings. So what works for others, may not be the answer for you. Some of us even adjust throughout the day. Just keep playing with the settings and you'll find your sweet spot, just don't be surprised if your sweet spot changes. Vape on! :vapor:
I have to agree, I usually start out somewhere around 7 watts and bump it up/down during the day depending on how it's vaping and what kind of mood I'm in...
 
Status
Not open for further replies.

Users who are viewing this thread