So I got 4 new Bauway Attys...

[alldayvape]

At first none of them would work with my Infinity, so I decided to try them out on my eGO battery, and all worked. I then tried them out on my Omega and only 2 would even screw on right, both worked. I then connected a 510 to 510 adapter to my Omega and none of the four worked. Connected the same adapter to my Infinity and none of the four worked. When I use my 510 modders connector from AvidVaper, three of the attys work on the Infinity. With the same 510 modders connector all four work on the Omega.

I don't quite understand what the issue could be, as all 4 work on the eGO battery and all four on the Omega. Something to do with the contacts maybe? Also, when I did the tests, sometimes one of them would work, and after trying another atty that wouldn't work, that same atty that did work the previous time did not work.. Anyways, pretty confusing..

 

[Anglo]

I have noticed that some atomizers aren’t threaded cleanly or precisely. I’ve had some that were difficult to screw into Prodigy or Icon adapters, but they were not so difficult to screw into eGo batteries. I suppose that’s because the Prodigy and Icon threads are machined to a higher tolerance.

I have also noticed that quality control of Bauway atomizers seems none too good as of late. I got 10 of them in my last order, and only 4 of the 10 worked as well as usual. The others wouldn’t put out much vapor at 3.7 volts, but fried and died at 6 volts. They haven’t been fitting my stainless steel drip tips either. The drip tips pop right into other 510 atomizers, but won’t go into these Bauways.

 

[doots]

check this thread for answers
http://www.e-cigarette-forum.com/fo...have-atty-works-1-device-but-not-another.html

 

[alldayvape]

check this thread for answers
http://www.e-cigarette-forum.com/fo...have-atty-works-1-device-but-not-another.html

awesome!! I tried to look for a thread like that, but obv. I failed! Thx doots!

 

[doots]

awesome!! I tried to look for a thread like that, but obv. I failed! Thx doots!

no problem.. hope this helps.

 

[alldayvape]

it worked. all of them work now, well all but one which doesn't screw on right. But it works on the 510 510 connector. So thank you very much for that good piece of information!