Thxs Dan, very much so!!! I have read on treating the mesh before using it, any thoughts?
-
Need help from former MFS (MyFreedomSmokes) customers
Has any found a supplier or company that has tobacco e-juice like or very similar to MFS Turbosmog, Tall Paul, or Red Luck?
View thread
- Status
huh i would think you might roll it the other way so the spiral part is on the inside so it wont catch on the hole into the tank... come on mailman with my gtank lol
great pics dan ty
great pics dan ty
But then it would be the same thickness if rolled the other way, this way it tapers smaller at the top and fatter at the bottom. Easier to get in the hole...
Dan
Yup. It really catches on the hole into the tank. And since it's thinner walled wick it kinks easily if it got stuck while inserting into that hole.
but wouldn't that makes the tank leak juice all over the "combustion chamber"?
but wouldn't that makes the tank leak juice all over the "combustion chamber"?
Last edited:
I use a butane torch and dip it in water 4 time between each heating to red hot. Then saturate with ejuice and light on fire 3 times, and then soot it up with a regular lighter twice. I have never had a short this way.
Dan
Yup. It really catches on the hole into the tank. And since it's thinner walled wick it kinks easily if it got stuck while inserting into that hole.
but wouldn't that makes the tank leak juice all over the "combustion chamber"?
I pulled it apart at a football game to show a friend, and did not have my glasses on so I had a heck of a time finding the hole, had to shut off the light and go by feel LOL
But yes it is MUCH more prone to bending since it is so thin, just have to go SLOW when puting it in the hole.
And I have not experiance any leaking and my wick is not tight in the hole. Actually loose, but I run 80/20 PG/VG juice an it is thicker than staight PG mixes you get from vendors.
Dan
Last edited:
too many questions...sorry...any one feels like making a video on a how to assemble the tank...would save many from asking and more so all the same replies over and over again.....
It is stainless steel so pretty much indefinantly, just unroll (If caked with gunk) clean with a toothbrush and reroll.
Dan
shut the front door. no gtank again today... come on postal people this is cruel and unusual punishment...
Found myself with a little short this morning before heading to work. So in a rush, I thought I'd throw on a new coil. Not something easy to do under time pressure, ended up leaving it at home for the day as I couldn't get a good reading. 8( Back onto the carts for the day. Already itching for the day to end to get back to it.
Wish I had 2.
Wish I had 2.
I know what you mean, I don't disturb the coil at all. Mine has been sadly staying at home as I vape it pretty heartily in the evening and then think the juice won't last me out and about the next morning. Gotta get in a better cycle here.
I know what you mean, I don't disturb the coil at all. Mine has been sadly staying at home as I vape it pretty heartily in the evening and then think the juice won't last me out and about the next morning. Gotta get in a better cycle here.
Yeah I get about 3 hours woth out of a full tank. I carry it with me as my secondary and loath when the tank needs to be refilled. Tanks is always wet and slick, hard to grip and rip and refill. But It is an awesome peice of machinery.
Dan
A little bit of knurling might help with the wet and slick tank Dan. hehe. But I would make another tank just for having it knurled and not butchering the original ones. just a thought
just a thoughtDepends on the tank fit too. I seem to be lucky that it rocks a bit side to side and pops off nicely. Not so cleanly lol. BTW, anyone know the capacity of an empty 510 carto tube? Something familiar here...
A little bit of knurling might help with the wet and slick tank Dan. hehe. But I would make another tank just for having it knurled and not butchering the original ones.
Already emailed him for the thread size for the various parts
But yeah I could make a one with knurling on it to help with the removal process. Have to wait for Monday to do that, have to go to a wedding in Illinois this week end.Dan
Try as I might I cannot get the 701 mouthpiece to unscrew from this thing. It's not critical that it comes off right now but it sure
me off.
me off.
mesh, wick and wire all ordered with the help of MWA!!! let the waiting begin.....
I cheat
. Instead of doing that, I torch my coils for a while with a butane torch till all i see is wick left, re-oxidize and put it back. Unrolling and brushing does certainly work, but I hate to unroll them and re-roll unless they are kinked or damaged in some way. Just my 2 cents
Hi all, I'm getting nothing from my tank.Where should I place the probes on my multimeter to check for power.I'm guessing it's the S wire,but I can't tell (no way to see in there). any other suggestions would be appreciated,thanks.
- Status
Similar threads
