Some juices creates dry burns?

[Simplejack]

Seems that some juices are so thick? that it doesn't flow completely through out the whole fiber inside the cartomizers and constantly creates a 50% burn taste when vaping. tried more then 1 cartomizer and so far just the one flavor has this problem and it's also the most thick that takes a bit to drain into the cartomizer.
Hunters Blend is the flavor I'm having a issue with.. Anyone else have this problem and is there a cure?
It's one of my favorites when it's vaping like it should, but after just a little bit it tastes burnt with every vape.. adding about 4 to 5 more drops causes it to over fill and leak out the bottom of the cartomizer, so it's not running dry, its just not thin enough to reach the atomizer inside..
My cartomizers hold about 30 drops.

I took a atomizer apart and part of the wick sleeve was burned in half when i unrolled the fibers inside..

 

[Keefer]

You may want to try different cartos. I have not used Hunters in a carto but I have a carto running right now with Malty Toffee which is pretty thick and not having any issues. I'm using the 510 dual coils from Don. I have had issues with other cartos but these seem to be working out really well. I mainly drip but sometimes it's nice to have a carto.

 

[Dkrom68]

Not sure really whats going on but the Hunters is a 70/30 pg/vg blend like the others and never really had a issue other than when theres something wrong with filler material or a battery going awry. have you tried it in a regular atomizer to see if you get the same thing????

 

[ejoker]

cartos can be persnickety. i've had some that do exactly as you describe, and others that perform for weeks on end. if i have an issue with one, it gets tossed.
there are brands of cartos that don't like vg mixes, i presume because the filler is packed too tight. i stopped using those. i only use dual coils or boge, both of which (for the most part) perform well with vg mixes.

 

[Simplejack]

Well I have tried 15 other flavors with different mixes and they all work fine in my cartomizers. Just this 1 flavor is giving me the same consistent issue on 2 brand new cartomizers.
The only carto issues i have are taking a extra second or 2 to heat up before I can take a drag and that is probably because the element is getting dirty

 

[Simplejack]

have you tried it in a regular atomizer to see if you get the same thing????

I don't use atomizers, but I did try another brand new cartomizer. seems to work perfectly, it's just roasting the filler because its not getting wet enough.

 

[whiskey]

Then I would refur back to Keefers post Simplejack

 

[Lori68]

Sometimes my regular boges works really well with my all day vape which is malty toffee. Other times they don't even last a day, so I totally agree with ejokers opinion on them.

I've tried the dual coils which seem to feed better and just recently the kanger horizontal cartomizers. The kangers totally suck when I try to vape my malty toffee (they don't feed well), but they really rock with casablanca (no doubt because its 70/30 pg/vg).

I also use reo's which are bottom feeding mods so I'm always rewicking my carto's with squonk action as opposed to dripping into them. That might also have a different outcome too.

 

[Simplejack]

Well I guess my only option would be to get a Adapter to fit on my X-Power so I can use 510 Cartos and try the Dual coils..

 

[pearlheartgtr]

I had the same problem a couple of months back with Backo and MelonBaco using CE2s on a Riva. Must have been that batch because it hasn't happened since.

 

[Simplejack]

Is there anything that can be put in the juice to make it just a tiny little bit thinner? I just wanna see if it makes any difference and not alter the flavor.

 

[calico21]

one or two drops water or 100% pure grain alcohol. it may lower the flavor a tad but if you keep it to just that amount it shouldn't kill the flavor

 

[Simplejack]

one or two drops water or 100% pure grain alcohol. it may lower the flavor a tad but if you keep it to just that amount it shouldn't kill the flavor

Just drop in the cartomizer or in the actual bottle of liquid?

 

[Simplejack]

I made a video of my cartomizer in 720p

 

[Dkrom68]

Never use regular water only distilled water if any and a small amount

one or two drops water or 100% pure grain alcohol. it may lower the flavor a tad but if you keep it to just that amount it shouldn't kill the flavor