Spectrum's Tankapalooza - Hyper Color Pyrex Tanks and Tips for RBA's and More!

[murtcepS]

You are probably right ....but what the hey (they were really cheap!) If they work great - if they don't no biggie.

I know I want to order the Orange full size tank (any idea on the ETA of the matching Orange DT? - you know I like matchy things )

And then I really need to look, I think I also need a Smoke one and probably another DT to go with that...will have to take inventory and will probably order tomorrow .

I like matchy things! With only 2 sizes having orange available I was gonna hold off on making the tips. Think we need to have a fire sale on anything pink and dedicate a production run to orange! Love the way that color came out! Here it is....

So, Mike - gotta question for ya before I pounce on the new RH tanks. I currently use your TC Nano tanks (#23) with my RH Nano Kit. It works okay once I've managed to load 'er up, but I seem to lose a lot of liquid when I'm trying to fill this combo. Liquid is spat back up the fill hole, no matter how slow I fill. I've tried filling from the bottom, and from the the top cap as well. Same story. Is the ID on #23 larger than the ID on your new RH tanks (#'s 24 & 25)? I'm hoping your RH specific tanks will fix this problem!

Anyone else have this issue? The fault could be my own, but, if anyone out there in TV land has noticed this and found a way to fill this combo without the backspat issue, feel free to gimme some pointers?

Oh, I also noticed that Teal is not currently a color option for #'s 24 & 25. Was this an oversight when you listed them, or are they simply not available in this size?

Thank you in advance!

I think Elantis has ya covered on that one but a proper length tank can't hurt. We use the same tubing for TC and RH...Just different o-rings and lengths. The o-ring in the top cap should be completely sealed using the shorter RH tanks. I'm getting a full vacuum effect right now

Orderin' a smoke tube tomorrow

As promised... Order 1 and I'll send ya 3! You guys just put the other ones you want in the "Merchant Instructions" part of PayPal. I'll take care of ya

 

[Elantis]

I like matchy things! With only 2 sizes having orange available I was gonna hold off on making the tips. Think we need to have a fire sale on anything pink and dedicate a production run to orange! Love the way that color came out! Here it is....

I think it looks amazing and so love the color!!!!!

I think Elantis has ya covered on that one but a proper length tank can't hurt. We use the same tubing for TC and RH...Just different o-rings and lengths. The o-ring in the top cap should be completely sealed using the shorter RH tanks. I'm getting a full vacuum effect right now

I really have only had that problem on a couple of the "cheap" clones, but with these tanks - they look like a "million".

As promised... Order 1 and I'll send ya 3! You guys just put the other ones you want in the "Merchant Instructions" part of PayPal. I'll take care of ya

Thank you for your generosity - I need a few more colors to brighten up my world.

 

[Elantis]

I recently purchased a Vaperfexion Pro-2 carto tank from the classies....and wondering if you have anything close to this size:

OD 22.22mm
Thickness 1.5mm
Height 26.65mm

The O-rings are like 17mm OD X 2mm thick.

The tanks for the RH look like a good fit on the OD but the O-rings don't touch the interior - I really like the tank as it looks awesome on the pthingies but clear is such a boring color

 

[murtcepS]

The Z-Atty tanks would be the closest. I know how you like to tinker and make things work... Might be able to shim the bottom with a small CS o-ring if needed.

OD 22mm
Thickness 1.5mm
Height 25.5mm

 

[Elantis]

The Z-Atty tanks would be the closest. I know how you like to tinker and make things work... Might be able to shim the bottom with a small CS o-ring if needed.

OD 22mm
Thickness 1.5mm
Height 25.5mm

Ooooo...that sounds promising - must try one of those!!! Too bad I already sold my Z-atty

And the height wouldn't be a big deal, just means the carto would peek a little out of the top

 

[bigcase100]

I think Elantis has ya covered on that one but a proper length tank can't hurt. We use the same tubing for TC and RH...Just different o-rings and lengths. The o-ring in the top cap should be completely sealed using the shorter RH tanks. I'm getting a full vacuum effect right now



As promised... Order 1 and I'll send ya 3! You guys just put the other ones you want in the "Merchant Instructions" part of PayPal. I'll take care of ya

I've found an old bottlecap that has a flexible needle tip that seems to work much better than the 18ga. blunt tip. No need for me to bust out the Dremel and ruin anything.

And thank you for the promised extras! Soon as I can make a decision, an order will be made! Much Appreciation, Amigo!


Oh, and the Teal is currently a no go, I assume?

 

[bigcase100]

Order in!

And, the sun is shining, so I thought I'd share a quick photo of the Tankapotamus Family thus far.

 

[murtcepS]

Lookin good bigcase! Thanks for posting Sorry I missed your question. We ran into a delay with teal because the coloring was on backorder. Just about set now... Will be adding teal to the website Thursday or Friday

 

[Elantis]

The Z-Atty tanks would be the closest. I know how you like to tinker and make things work... Might be able to shim the bottom with a small CS o-ring if needed.

OD 22mm
Thickness 1.5mm
Height 25.5mm

Omgosh!!!! I just realized with the Z-atty tubes I can get Sparkles!!!!!!!!! Ok - now to decide what color sparkles would look awesome with the Pro V2 tank and on which Provari....me thinks I might be ordering the Graphite one first and if all is well with the fit, then I will order other colors

View attachment 350191



Order in!

And, the sun is shining, so I thought I'd share a quick photo of the Tankapotamus Family thus far.

Very Nice looking family you got there!!!

 

[bigcase100]

Lookin good bigcase! Thanks for posting Sorry I missed your question. We ran into a delay with teal because the coloring was on backorder. Just about set now... Will be adding teal to the website Thursday or Friday

No problem. Dang the luck though, I just ordered a few hours ago. Hehe!

Omgosh!!!! I just realized with the Z-atty tubes I can get Sparkles!!!!!!!!! Ok - now to decide what color sparkles would look awesome with the Pro V2 tank and on which Provari....me thinks I might be ordering the Graphite one first and if all is well with the fit, then I will order other colors

I don't envy you, I'm already terrible at making up my mind. A bigger selection would stress me out!

 

[Uno mas]

Long awaited smoke tube ordered

 

[murtcepS]

Omgosh!!!! I just realized with the Z-atty tubes I can get Sparkles!!!!!!!!! Ok - now to decide what color sparkles would look awesome with the Pro V2 tank and on which Provari....me thinks I might be ordering the Graphite one first and if all is well with the fit, then I will order other colors

Shiny/Sparkly things The Graphite looks awesome in the sun!

No problem. Dang the luck though, I just ordered a few hours ago. Hehe

Haven't packed it up yet. If you don't mind waiting an extra a day or two for shipping I'd be more than happy to swap one out for ya.

Long awaited smoke tube ordered

Thanks Uno! Remember...Buy 3 and I'll send you 1

 

[Elantis]

Shiny/Sparkly things The Graphite looks awesome in the sun!

Ok...you talked me into it (Like that was difficult to do ) Gonna order one....soon!

Thanks Uno! Remember...Buy 3 and I'll send you 1

Oh Snap!!!!!

 

[bigcase100]

Haven't packed it up yet. If you don't mind waiting an extra a day or two for shipping I'd be more than happy to swap one out for ya.

Fantastic! If you would trade the dark blue for the teal, I'd love you forever!

 

[Uno mas]

The teal is my favorite without a doubt, the Amber is also a beautiful color...

Already have a Teal on the other rings so I held off askin', will probably pick up another at some point

Really lookin' forward to the smoke, goin' to look nice with the polished Russian assuming I did a good enough job on the rings

 

[Elantis]

The teal is my favorite without a doubt, the Amber is also a beautiful color...

Already have a Teal on the other rings so I held off askin', will probably pick up another at some point

Really lookin' forward to the smoke, goin' to look nice with the polished Russian assuming I did a good enough job on the rings

Oooo...can't wait to see that combo!

 

[Uno mas]

Elantis twisted my arm for a orange tube

 

[Elantis]

Elantis twisted my arm for a orange tube

It's gonna be boooooootiful!!!!

You will thank me....just wait and see ...anyhoos I think turnabout is fair play, I wouldn't have my teal beauties had it not been for you.

 

[nasca]

whats the eta on the upgraded science of vaping tanks?

 

[bigcase100]

The teal is my favorite without a doubt, the Amber is also a beautiful color...

Excited about the teal ever since Mike showed the photo on the SoV kit. I ordered an amber too!

Oooo...can't wait to see that combo!

Likewise! Photograph please!

Elantis twisted my arm for a orange tube

No arm twisting required for me...after seeing the pictures, I also had to have the orange!