Checking the stock RH Nano tube (no rings) it measures .515 (13.081mm) long, hope this is what you are needing 
- Status
Checking the stock RH Nano tube (no rings) it measures .515 (13.081mm) long, hope this is what you are needing
Nice! That's right in the neighborhood I'm in. Thanks buddy!
Amber tip topping a IGO-S on my Woodvil
Another pic that looks GREAT! I need to hire you for product shots
Thanks Uno...Rainbow Heaven tanks are on the way
Another pic that looks GREAT! I need to hire you for product shots
Yeah I need to finish polishing the IGO-S cap, didn't want to go too far till I got a chance to vape it after I converted it to a bottom feeder, hits almost as nice as my VA Cyclone(s)
Funny thing is all my pictures have been taken with my old iPhone 4
So you are going to offer both sizes of RH tubes? I need a full length smoke tube and I want to get it first
Last edited:
Hello gang!
Been awhile since I was here last - looks like you all have been busy! Sorry to hear about the RH quartz kit incompatability, but it sounds like you are on top of the situation!
I've been keeping an eye out on the Science Of Vaping quartz kits, especially the V2 with the threaded chimney/topcap, and I'm happy to report I finally landed one! Working well with my authentic KFL+. Now, I'm hoping that your tarsius tubes will fit on this baby! I don't have calipers, nor do I really even understand tolerances, OD, ID, etc. etc., so I'm going to place an order and hope that they are compatible! I need color!
Good to see all of the photos being passed around. Uno, I'm digging the Teal Hana setup you're rocking there! And Elantis, the ProVari army is nothing short of beautiful! Mike, keep up the great work! You make personalization a breeze!
Once I've received the Tankapotamus quartz kit test-tube, I'll report how it works with the SoV kit, just in case anyone out there is also curious.
Holler at you guys soon!
Been awhile since I was here last - looks like you all have been busy! Sorry to hear about the RH quartz kit incompatability, but it sounds like you are on top of the situation!
I've been keeping an eye out on the Science Of Vaping quartz kits, especially the V2 with the threaded chimney/topcap, and I'm happy to report I finally landed one! Working well with my authentic KFL+. Now, I'm hoping that your tarsius tubes will fit on this baby! I don't have calipers, nor do I really even understand tolerances, OD, ID, etc. etc., so I'm going to place an order and hope that they are compatible! I need color!
Good to see all of the photos being passed around. Uno, I'm digging the Teal Hana setup you're rocking there! And Elantis, the ProVari army is nothing short of beautiful! Mike, keep up the great work! You make personalization a breeze!
Once I've received the Tankapotamus quartz kit test-tube, I'll report how it works with the SoV kit, just in case anyone out there is also curious.
Holler at you guys soon!
Hey bigcase! That was a great post...Really enjoyed reading it!! Especially the Tankopotamus test-tube part...Test-tube baby!!!
I'm very interested in seeing if they fit the SOV kit. It's another dynamic that hasn't been fitted yet. I'll ship tomorrow...If you run into any trouble feel free to give me a shout
I'm very interested in seeing if they fit the SOV kit. It's another dynamic that hasn't been fitted yet. I'll ship tomorrow...If you run into any trouble feel free to give me a shout
Last edited:
Hey bigcase! That was a great post...Really enjoyed reading it!! Especially the Tankopotamus test-tube part...Test-tube baby!!!
I'm very interested in seeing if they fit the SOV kit. It's another dynamic that hasn't been fitted yet. I'll ship tomorrow...If you run into any trouble feel free to give me a shout
Hehe! I tend to get wordy sometimes when typing! Plus, I like saying the word Tankapotamus!
I promise to let ya know the verdict soon as the test-tubes arrive! If all goes well, I'll definitely revisit your shoppe and snatch up more colors! Every time I place an order it's tough for me to choose which hue to grab next! Dang you! I NEED them ALL! Hehe!
Hey are there any updates on a release date for a glass kit for the Kayfun Lite +
??
Cheers
Phil
??
Cheers
Phil
Howdy all! I hope that everyone had an enjoyable and safe memorial day weekend.
I just got back into town, and found my test-tubes waiting in the mailbox. Thanks Mike! After ripping open the box and tinkering around for a bit, it seems that they do not want to play well with the SoV V2 quartz kit. (I do not own the V1 kit, so I cannot speak on the compatibility of that one). I tried the various o-rings you included, as well as a couple that I had lying around - sadly, no dice.
Using the o-rings included with the SoV kit, the tubes are too wide. No contact between ring and tube at all. When the RH and Tarsius compatible o-rings are used, the test-tubes are too narrow. I think the groove that holds the o-ring isn't cut deep enough to allow the tube to slide over the ring. A bit of a bummer, as your glass is much nicer than the glass included with the kit.
I think my next move will be tracking down a Tarsius and/or the RH kit so I can utilize these colorful tankapotamuses! My quest continues!
I just got back into town, and found my test-tubes waiting in the mailbox. Thanks Mike! After ripping open the box and tinkering around for a bit, it seems that they do not want to play well with the SoV V2 quartz kit. (I do not own the V1 kit, so I cannot speak on the compatibility of that one). I tried the various o-rings you included, as well as a couple that I had lying around - sadly, no dice.
Using the o-rings included with the SoV kit, the tubes are too wide. No contact between ring and tube at all. When the RH and Tarsius compatible o-rings are used, the test-tubes are too narrow. I think the groove that holds the o-ring isn't cut deep enough to allow the tube to slide over the ring. A bit of a bummer, as your glass is much nicer than the glass included with the kit.
I think my next move will be tracking down a Tarsius and/or the RH kit so I can utilize these colorful tankapotamuses! My quest continues!
I think my next move will be tracking down a Tarsius and/or the RH kit so I can utilize these colorful tankapotamuses! My quest continues!
This one should work with Spectrum's tanks....
Kayfun Quartz Kit - Full Size - Kidney Puncher
Yes they do - I have three of those and several of Spectrum's tanks and they work wonderfully.
Thank you for the heads up!
And thank you for the confirmation!
Order placed!
We have tanks for the Tarsius kit in stock and working on the Rainbow Heaven version right now
Howdy all! I hope that everyone had an enjoyable and safe memorial day weekend.
I just got back into town, and found my test-tubes waiting in the mailbox. Thanks Mike! After ripping open the box and tinkering around for a bit, it seems that they do not want to play well with the SoV V2 quartz kit. (I do not own the V1 kit, so I cannot speak on the compatibility of that one). I tried the various o-rings you included, as well as a couple that I had lying around - sadly, no dice.
Using the o-rings included with the SoV kit, the tubes are too wide. No contact between ring and tube at all. When the RH and Tarsius compatible o-rings are used, the test-tubes are too narrow. I think the groove that holds the o-ring isn't cut deep enough to allow the tube to slide over the ring. A bit of a bummer, as your glass is much nicer than the glass included with the kit.
I think my next move will be tracking down a Tarsius and/or the RH kit so I can utilize these colorful tankapotamuses! My quest continues!
No problem my friend
Sorry the tanks didn't fit your SOV kit. Being too wide with stock o-rings and too narrow with the supplied o-rings it sounds like they have the possibility of fitting. How does the length compare? Will the chimney get past the o-ring in the top cap and create a good seal? If the length is good you can send it my way for fitment if you like. I have just about every o-ring size known to man sitting here.
I finally got my other Kayfun lite V2 clone in the mail yesterday, I was sooooo happy that it comes with two separate tops (as I have one clone that I can't replace the drip tip)...all of mine are so mixed up now, I would have no idea which parts go to what one 
Now I just have to clean it up, and fit it with my other RH kit, Spectrum's glass and I will be good to go!!
Now I just have to clean it up, and fit it with my other RH kit, Spectrum's glass and I will be good to go!!
- Status
Similar threads
