Squonkaholics Daily Drivers

[AngeNZ]

I'm nterested in what other vapers are using in their daily rotation.

Since we already have the long running Squonk Porn! thread, this isn't a picture thread. If you want to show off your mods, post a pic in Squonk Porn thread.



My favourite setups are 2 Asmodus Pumper 18s, A Vandy vape Pulse v2 and and a mech dotSquonk. All four have Axial RDAs on top

 

[73neb]

My daily rotation is two topsides and a topside lite, all with .blank rda’s.

 

[Izan]

Since finding the Hugo Squeezer, I now only carry one device. No need to carry a back up.
A simple, light, nylon printed mech with silver plated Bry copper contacts, the Hugo squeezer will accept an 18650, 20700, or 21700 battery. Replacement contacts available if needed.
With a 10 ml bottle and a decent spring loaded 510, I have NO internal leaking, weeping or seeping.
The kit includes 2X10ml silicone bottles and a 30ml refilling bottle. I swapped the overly soft silicone bottles for a more ridged version from an Augvape S2. The 30ml refill bottle works flawlessly and has become my default refilling method.

Overall, the best $20-$25 I have ever spent on a squonker. I have two so far and plan to pick up another.... back ups for back ups and all that.

Topper is a Biochip rda clone. Top air and virtually impossible to oversquonk, it is a great little LMTL/RDTL single coiler.

Cheers
I

 

[Spydro]

My all time top shelf squonk mods was five Reo P67's, and well before the end they were all running Wotofo Profile Mesh RDA's.

 

[zoiDman]

My Daily Squonker is a Wismec Surface with a NarDa on top.

 

[puffon]

Too many to list. I like variety.
This week Pico Squeeze 2 with a Requiem RDA.
Always have a REO Grand with a Hellfire Viper RDA w/unflavored running.

 

[ShowMeTwice]

Lately a dotMod dotSquonk (mech) with a Hussar v2 RDA and the Psyclone Mods SqEvo DNA60 with an Atmizoo Creek (ice matte) RDA.

Both are lovely vapes and awesome pairings with my DIY juices.

Next week it'll be totally different squonkers. However, there will always be at least one of my Creek's involved.

 

[Seiggy]

Pico Squeeze 2 (AF) & Profile 1.5 in TC
Pulse II & Profile 1.5 in TC
Topside & Vandy Vape Mesh V2 in TC

 

[cadman]

My daily squonker is a DOVPO Topside with an Axial RDA.. In the evening is when the REO's come out.

 

[Alexander Mundy]

6 mods CAD'ed and 3D printed with PETG by me. Similar to Peters "lil pinch" but 2100, a recess at the battery bottom so when dropped doesn't mash the contact flat, and ring mods to make the top snug and not rotate or angle loose if dropped. Atties are the old Triangle atty modded for bottom feed (similar to how Robert modded them into RM2's). Occasionally I'll drop one on concrete hard enough to crack but it only takes a couple hours to print another. My favorites are glow in the dark.

Edit: 20700 not 2100. Autocorrect strikes.

 

[borno]

I'm using one of my luna's or one of my oumier wasp BF mods usually. I was using the ram stentorian at work, but switched to the oumier just to be a bit safer. I still like the narda a lot, also the hussar 2, narca and haku venna.

 

[mimöschen]

I like variety.

DL:
Desire Cut/Asgard Mini
Desire Cut/Passage
Desire Cut/Reload S
Sigelei Fuchai Squonk/ElderDragon
Sigelei Fuchai Squonk/Pulse X
Wismec Luxotic MF/MadDog

MTL:
3x Asmodus Luna/Vapefly Holic
CouncilOfVapor Wraith/Geekvape Ammit

 

[Resistance]

For now just 1. DS with Berserker RDA.

 

[CMD-Ky]

I have four in general use. Two Pico Squeezes and two VTinboxes. On top, I have two Entheons and two Wasp Nano's. The build is Kanthal 26 guage running around 1.0 Ohms with a rayon wick, no exotic wire formations. It has been that way for months. I am nothing, if not consistant. Others may say "boring" or "stuck in a rut" but I like to think: consistant.

 

[Pigs]

Inbox/Axial and Luna/Axial

 

[BNEAT]

dotMod dotSquonk 100 + VapeFly GALAXIES RDTA... my fave squonk combo, but it's really not in my rotation that often

 

[Vapemesilly]

I have two Dovpo Topside 90w both running Ammit MTL RDA's, both in daily use. A MTL vapers dream.

 

[Rathamar]

Way to many Mods to list and it changes all the time. Currently, I have the New Pulse V2 Mod (replaced the 90W Pulse) and an old school Coppervape BF Mod, the 18650 metal one, not the new box they have.

Both are running a Gorge. The Gorge is my all time favorite RDA. I always have at least one on a mod.

I do have a Hugo Squeezer coming, so that will end up in the rotation for a while.

 

[Fidola13]

I have 3 DovPo Topsides 90 watts in solver, gold & red. I have two more in purple & black that I haven’t used yet.

In addition to the Topsides Ive got a Revenant in red in the daily rotation.

Finally, I have a Pumper 18 always ready to go.

 

[Fidola13]

I have 3 DovPo Topsides 90 watts in silver, gold & red. As well as the dual battery Topside. I have two more in purple & black that I haven’t used yet.

In addition to the Topsides Ive got a Revenant in red in the daily rotation.

I use a variety of RDAs both single and dual coils.

Finally, I have a Pumper 18 always ready to go.